Installieren der BMW Diagnose SW a) WIBU Setup startet automatisch. Falls WIBU Version 5.10 oder neuer schon installiert ist, auf "Abbrechen" klicken. 1) WIBU Box am LPT Port anstecken 2) CD einlegen 3) Auf das CD-Rom Laufwerk wechseln 4) Doppelklick auf das Verzeichnis "Programminstallation" 5) Doppelklick auf "setup" 6) Sprache für den Installationsdialog auswählen, dann "OK" Klicken 7) Diverse Bestätigungen anklicken 8) Verfügbare Hardware-Interfaces "ADS" auswählen "weiter" 9) Die Meldungen "Anwendung für Datensicherung nicht gefunden" überspringen 10) Ja, Computer jetzt neu starten 11) Nach dem Neustart des PC´s wieder auf das CD-Rom Laufwerk wechseln 12) In das Verzeichnis "Referenz/Install" wechseln 13) Den Icon "Instprog" anklicken 14) Instprog.exe ausführen OK/Weiter klicken paar mal 15) Sprache auswählen 16) mit "weiter" bestätigen 17) Konfiguration auswählen "Nacharbeitungsprogramme" Aus Liste Werke 18) 3 Haken machen (update, update, komplett) 19) Anschließend im DOS Fenster den ADS Treiber installieren 19a) Auf Wunsch der Kunden die sich mit DOS Befehlen nicht auskennen habe ich noch das File ADS.bat geschrieben. Dos Fenster starten, auf das CD Laufwerk wechseln, "ads" eingeben und bestaetigen mit <ENTER> fertig. 20) Windows,Zubehör,DOS Eingabeaufforderung,mit cd.. alles schließen,auf D (CD/DVD Laufwerk)wechseln , D: dir ads, nach dem dir ads 32 schauen und ausführen ,raus mit Exit 21) Die Datei "autoexec.bat" gemäß "autoexec.new" überarbeiten, d.h. der Pfad c:\ediabas\bin muß eingetragen werden. Zu finden unter:System Configuration, Systeme, Erweitert, Variable Umgebungen Install the wibu setup,if you have wibu on your laptop it´s no need to do it Connect the green Wibu dongle to the LPT port Insert the CD Change to the CD drive Doubleclick folder Programminstalation Doubleclick setup Select the language for the installation and click OK Click some next buttons Choose Hardware Interface ADS and next Skip the message "Anwendung für Datensicherung nicht gefunden“ Restart the laptop After restart change to CD again Go to the folder Referenz/Install Click to the icon Instprog Start the instprog.exe with OK and confirm some next steps Select the language Confirm with next Select the configuration – Reworkprogramm ( there is a list with different plants ) Tick the 3 boxes : update,update,complett Go to the DOS window and install the ADS driver Go to windows,accessoirs,DOS box and close all programmes with cd.. Go to the CD drive f.e. D with D: Look for the ADS directory with dir ads Look for the file ads 32and start it Finish the DOS box with exit 21)The autoexec.bat must look like the autoexec.new on the CD,that means you need the c:\ediabas\bin You find the autoexec.bat by system configuration,systems, advanced, variable Environment. If there is a autoexec.bat you must add the ediabas\bin, If there is no autoexec.bat you can copy the one from the CD
pablo-2