GOCLEVER TAB T70 EN PL(1).pdf

(536 KB) Pobierz
GOCLEVER TAB T70
/Place photo here/
USER’S MANUAL
INSTRUKCJA OBSŁUGI
www.goclever.com
751340762.011.png 751340762.012.png
Declaration of Conformity
Hereby GOCLEVER Technology declares that the product complies with the essential requirements and other provisions of Directive
199/5/WE.
Environmental Protection
The device is subject to the WEEE Directive 2002/96/EC. The symbol next to mean that the product must be disposed of separately
and should be shipped to the appropriate collector. This allows you to limit pollution and the impact on human health.
Also like to inform that our company has the obligations under the Act on waste electronic equipment, including in his collection,
treatment, recovery and recycling is supported by KARAT ELECTRO-RECYCLING Ltd. If you have any questions or concerns you
can contact Karat call 056-623-80-91.
Responsibility
GOCLEVER Technology Company nor any of its licensors shall not be liable for any loss of data or profits, as well as for any other
consequential or indirect damages resulting from the use of equipment brand, in any case and the maximum permitted by law.
GOCLEVER Technology is not responsible for any problems related to the malfunctioning of the operating system and applications
operating under its control.
Changes
GOCLEVER Technology reserves the right to revise this document and the specifications of the device, without notice to you. These
features and images may vary depending on the services offered by the operator and software version of the device.
Before using
Remember that the battery is not charged. Opening or attempt to disassemble the outer casing of the device will void the warranty.
Google is a registered trademark, and Google Maps is a trademark of Google Inc.. in the United States and other countries. YouTube
is a trademark of Google Inc..
GOCLEVER Technology Company is not liable for technical or editorial errors or for omissions contained herein is not responsible for
incidental or consequential damages resulting from furnishing this material.
Information is presented in such a state in which you adopt them, and are not covered by any warranty. Subject to change without
notice. GOCLEVER Technology Company reserves the right to change the contents of this document without prior notice. The
manual describes basic functions of the device.
Security
Please refer to these guidelines. Failure to comply with them may cause danger to life or health or may be illegal. For further
information, please read the entire podr Ę cznikiem.Urz Ą dzenie was designed to operate from battery and mains supply with the
charger. Using the device in a different way can be dangerous and will void the warranty.
Charging Battery
The unit should be connected only to a power source in accordance with the parameters set out in the specification. In case of doubt
as to the type of power source required, consult an authorized service provider or local power company. If the product is powered
from a battery or other sources, follow the instructions supplied with the product.
The impact of external factors and the electromagnetic field
The device is not waterproof. Make sure that it was always dry, protect from moisture. The device also must be protected against high
and low temperatures, dust, sand, do not expose it to shock, throw, as this may damage it or its components.
Do not use the device in a damp and very high or low temperatures.
Do not leave the device in the vehicle or in places where temperatures exceed 50 degrees Celsius.
Do not use the equipment on board aircraft and in areas where it is not allowed to use equipment that may emit an electromagnetic
field for example a hospital, petrol station, a warehouse of explosives violations of these rules may result in fire or explosion.
Do not use the device while driving.
Do not use the device near strong electromagnetic sources, such as microwave ovens, sound speakers, TV and radio.
Use only original manufacturer-approved accessories, or accessories that do not contain metals.
Service and Repair
For repair use the authorized service and qualified staff, any attempt to repair yourself, or by unauthorized service will void the
warranty.
751340762.013.png 751340762.014.png 751340762.001.png
1. Visual Description
Refer to below picture:
2. Power management
2.1 Inbuilt battery
The unit built-in 3200mAh battery, working time for different status is belo w:
Working time for only Wi-Fi working
4 hours
Working time for only playing multimedia
3 hours
Working time for only playing online Video
2 hours
2.2 Power adaptor and charging indicator
Power input is 5V/2A; Please don’t use other one with different specs.
Charging time, the charging indicator is red; charging full, indicator is turn off.
Charging time is 5 hours when the unit is shutdown state; the unit could be used normally, but
charging time will be longer.
2.3 Power ON/OFF
Power ON: Ensure power is sufficient firstly. Long pressing the power button for 4s, greeting image
appears, releasing power button. After system booting, the unit enter lock-screen image, as below:
751340762.002.png 751340762.003.png 751340762.004.png 751340762.005.png 751340762.006.png
 
Pull the “Unlock icon”
upward to green dot position to enter main menu; Pull the “Mute icon”
downward to green dot position to mute mode.
Power OFF: Long pressing the power button for 4s. The unit will enter confirmation of shutdown as
below:
Sleeping: Short pressing power button for 1s, system enters sleeping state, the screen go black;
Short pressing power button for 1s to wake up. If low power when sleeping, the unit will wake up
and shutdown automatically.
Forced shutdown: It takes 15s to force shut down by long pressing power button.
751340762.007.png 751340762.008.png 751340762.009.png
3. Inner and external storage
3.1 Classification of storage
The unit supports 3 storage spaces: Inner storage, USB type external storage, TF card.
Inner storage is 4GB size. The application files installed by APK will be stored here.
USB type storage and TF card support max up to 32GB
3.2 How to use storage
Insert storage to corresponding slot, “Preparing SD card/USB device” will show in left top of screen.
Run ES File explorer to read these storages.
The file of TF card will be found under folder named “sdcard”; the file of USB device will be found
under folder named “scsi”; the file of inner storage will be found under folder named “nand”.
Caution: Before removing the storage, ensure all of files in the storage have been closed.
Otherwise, it is possible to break this storage; meantime, the unit will close the running application
to protect system.
3.3 How to connect with PC
Connect the unit to the PC via USB cable, Drag the status bar downward to get the notification
image like below.
Tap “USB connected (internal)” to mount the driver to read/copy/send/delete the files in the inner
storage from PC. Tap “USB connected (external)” to mount the driver to read/copy/send/delete the
files in the external storage from PC.
751340762.010.png
Zgłoś jeśli naruszono regulamin