Engineering Symbols, Prints and Drawings 01 - US DOE.pdf - Nieposegregowane - ziolek6661

DOE-HDBK-1016/1-93

JANUARY 1993

DOE FUNDAMENTALS HANDBOOK

ENGINEERING SYMBOLOGY,

PRINTS, AND DRAWINGS

Volume 1 of 2

U.S. Department of Energy

FSC-6910

Washington, D.C. 20585

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

This document has been reproduced directly from the best available copy.

Available to DOE and DOE contractors from the Office of Scientific and

Technical Information, P.O. Box 62, Oak Ridge, TN37831.

Available to the public from the National Technical Information Service, U.S.

Department of Commerce, 5285 Port Royal Rd., Springfield, VA 22161.

Order No. DE93012220

DOE-HDBK-1016/1-93

ENGINEERING SYMBOLOGY, PRINTS, AND DRAWINGS

ABSTRACT

The Engineering Symbology, Prints, and Drawings Handbook was developed to assist

nuclear facility operating contractors in providing operators, maintenance personnel, and

technical staff with the necessary fundamentals training to ensure a basic understanding of

engineering prints, their use, and their function. The handbook includes information on

engineering fluid drawings and prints; piping and instrument drawings; major symbols and

conventions; electronic diagrams and schematics; logic circuits and diagrams; and fabrication,

construction, and architectural drawings. This information will provide personnel with a

foundation for reading, interpreting, and using the engineering prints and drawings that are

associated with various DOE nuclear facility operations and maintenance.

Key Words: Training Material, Print Reading, Piping and Instrument Drawings, Schematics,

Electrical Diagrams, Block Diagrams, Logic Diagrams, Fabrication Drawings, Construction

Drawings, Architectural Drawings

Rev. 0

DOE-HDBK-1016/1-93

ENGINEERING SYMBOLOGY, PRINTS, AND DRAWINGS

FOREWORD

The Department of Energy (DOE) Fundamentals Handbooks consist of ten academic

subjects, which include Mathematics; Classical Physics; Thermodynamics, Heat Transfer, and

Fluid Flow; Instrumentation and Control; Electrical Science; Material Science; Mechanical

Science; Chemistry; Engineering Symbology, Prints, and Drawings; and Nuclear Physics and

Reactor Theory. The handbooks are provided as an aid to DOE nuclear facility contractors.

These handbooks were first published as Reactor Operator Fundamentals Manuals in

1985 for use by DOE category A reactors. The subject areas, subject matter content, and level

of detail of the Reactor Operator Fundamentals Manuals were determined from several sources.

DOE Category A reactor training managers determined which materials should be included, and

served as a primary reference in the initial development phase. Training guidelines from the

commercial nuclear power industry, results of job and task analyses, and independent input from

contractors and operations-oriented personnel were all considered and included to some degree

in developing the text material and learning objectives.

The DOE Fundamentals Handbooks represent the needs of various DOE nuclear facilities'

fundamental training requirements. To increase their applicability to nonreactor nuclear

facilities, the Reactor Operator Fundamentals Manual learning objectives were distributed to the

Nuclear Facility Training Coordination Program Steering Committee for review and comment.

To update their reactor-specific content, DOE Category A reactor training managers also

reviewed and commented on the content. On the basis of feedback from these sources,

information that applied to two or more DOE nuclear facilities was considered generic and was

included. The final draft of each of the handbooks was then reviewed by these two groups.

This approach has resulted in revised modular handbooks that contain sufficient detail such that

each facility may adjust the content to fit their specific needs.

Each handbook contains an abstract, a foreword, an overview, learning objectives, and

text material, and is divided into modules so that content and order may be modified by

individual DOE contractors to suit their specific training needs. Each handbook is supported

by a separate examination bank with an answer key.

The DOE Fundamentals Handbooks have been prepared for the Assistant Secretary for

Nuclear Energy, Office of Nuclear Safety Policy and Standards, by the DOE Training

Coordination Program. This program is managed by EG&G Idaho, Inc.

Rev. 0

Engineering Symbols, Prints and Drawings 01 - US DOE.pdf

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: