ArcTimer_1910290_0804_EN.pdf

Kemppi ArcTimer

1910290

0804

introduction

Kemppi ArcTimer is intended for measuring the arc time of

welding machines. The device is connected to the welding

or earthing cable where it measures the arc time based on

the welding current in the cable. The device display indicates

how long the arc has been on since the previous reset.

machine use

installation instructions

Follow these instructions to attach the device to the cable in

which the welding current is conveyed, such as the earthing

cable beside the machine.

1. 2.

1. Display

2. Reset button

3. Protective plate

• When the welding starts, the device starts storing the

welding time, which is shown on the display as hours

and hundredths of hour.

• The device increases the arc time shown in the display

until you reset the device with the button under the

screen.

• You can turn the protection plate in front of the display

to get a clean area over the display.

Put the device against the cable so that the groove at the

back of the chassis is pressed against the cable. The cable

thickness may be 50 – 95 mm2.

Ordering information

ArcTimer ordering code

6209200

Spare part items

Protective plate

W003231

Timer card A001 Arc Timer

SP003238

Magnetic circuit piece

SP003230

Technical speciications

Measurable current range

20–500 A

Cable thickness

50–95 mm2

Battery lifetime, minimum

5 years

Protection class

IP23

Operating temperature range

-10...+50 °C

External dimensions (L x W x H)

92 x 82 x 32 mm

Weight

215 g

Push the magnetic circuit piece in place over the device so

that the cable remains between the device and the magnetic

circuit piece.

You can secure the device to the cable by connecting the

front and rear parts with a lock as shown in the picture. (The

lock is not included in the delivery.)

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: