wifisky wireless adapter.pdf

WiFiSKY Serials of wireless access network card

WiFiSKY

802.11 b/g 2.4GHz 54Mbps long distance

Wireless network card

Product Description

WiFi serials provide wireless lan access equipment

of wireless broadband access in 0~50℃ indoor. It

works in the 2.4GHz frequency band and comforms

with the standard of IEEE802.11b/g. it adopts the

technique of DSSS/DFDM(orthognal frequency

division), which posses high speed and long

transmission range.It offers a variety of security

mechanisms to assure the secturity of data in public

network , for example, supporting WPA, 802.1x

authentication mechanism MAC access and control,

and WEP encryption.

Specification

Equipment interface

USB 2.0 standard

Wireless network connection

Standard;IEEE 802.11b/g

Frequency range:2400-2484 MHz

Transmission rate:automaticlly up to 11/54Mbps

Emisson type;DSSS/OFDM

Available channel;13 channels

Modulation:64QAM/16QAM/BPSK/QPSK/CCK

Frequency stability:within+

● ISM 2.4GHz IEEE 802.11b/g

● DSSS/OFDM technique

● Technique

● High cost performance

● Long distance reception.

● Through USB2.0 interface

with 56Mhigh speed

connection,the transmission is 8

times than USB2.1.

● Simple design and very

convenient for use.

● compatible desktop pc and

USB 1.1 interface of laptop.

● compatible

windows98SE,2000,Millennium,

XP,Linux and Win7plug and play

● Supporting 64/128/256 bits

WEP encryption.

● Supporting TKIP ,WPA,802,1X

security settings

● deploying 5DB high gain

antenna.

25ppm(in 25%)

Agreement

Security:WEP 64/128,802.1xsupport,

Wi-Fi Protected Access(WPA) WPA-PSK,WPA II

Network:TCP/IP,IPX/SPX,NetBEUI

Network architecture

Client card mode

Data modulation type

BPSK,QPSK,CCK and OFDM

Power supply

Input :5V+5%

Size/weight

8.5*2.2*6.3cm

38.5g

Operating environment:

Operating temperature:0~50

Storage temperature:-10~65

Humid range:5%~98%

Warranty

One year warrnty(except human factors damage )

(Version:v1.1.2009)

Notice

1 Product introduction

2 Security alert

3 Installation steps

3.1 Installation steps for drive and Management procedures

4 Network card management tools

5 Advanced settings

6 Wireless network card technique index

Before you use the wireless network card, please read the article carefully. The

company will not be responsible for any damage of wireless network card ,which

is caused by using the incorrect methods that is not accordance with the

provision of the article.

The article is the product direction, which the company makes for wireless

network card.And the company will try best efforts to assure the reliability and

accurateness of the information that include in the article. But the partial

content or all content of the article has become invalid because of upgrade of

the product or software, the company will not inform again. Please notice the

change of version, and renew it in time.

If you are not clear about the something of the article or the function description

of the product , please contact your supplier directly to solve it .

Thanks for using wireless network card of the company.The user manual will

help you to finish all the installation procedures. The installation should include

the following objects:

■　 Wireless network card

■　 Network card antenna

■　 USB cable

■　 Installation guide

■　 Include management procedures of wireless network card and cd of driver.

Notice: If lack something , please contact dealers.

There is Link pilot lamp on wireless network card. Under the AD-Hoc mode , the

pilot lamp is in a slow flash condition.

In order to assure normal operation, please notice waterproof and prevent other

harmful substances .

■　 Before you install the product , please read the installation guide carefully.

■　 If it appears malfunction, it must be repaired by licensed professionals.

■　 Please do not take apart the product by yourself,or repair it.

■ Please do not put the product in the humid environment, for example:in the

　　 bathroom.

■　 Please do not expose the product to the sun or the other heat, because the

　　 shell of the equipment and electronic devices will be probably damaged in 　

　 this condition.

The following chapter will lead you successfully to install wireless network adapter

Notice:please install the driver at first , then insert USB wireless network

card ,finally set the network and share resource.

The following steps is necessary for installing wireless network system.

1. First install a AP and use the architecture of Infrastructure mode.

2. Install the driver procedures of wireless network card using setup CD.

3. Install the hardware of wireless network card ;set communication agreement to

connect network, for example TCP/IP agreement.

1,Start and enter Windows ;

2.Insert setup CD and execute setup.exe , you will see the following picture that

appear in turn ;

3.Click “next” and appear the lanuage use of country

Picture-1

4.After choose it , click “next”, appearing the following picture .

Picture-2

5. Click “next”,then click “setup”. Finally , finish the setup picture .

Picture-3

Notice : after you have stalled driver, In order to make performance better, pls

pluck wireless adapter, then insert it again to start procedure.

The USB network card of company can use your own management software,

and also can use Windows own management procedures to manage under the

Windows XP. In this chapter, it will introduce USB own management procedures

. In application program ,the user can control all function . The application

program usually will open automatically and will show lcon

in the lower

right corner of the screen . If you can not see the lcon , please click

b e g i n n i n g→ p r o g r a m→ R E A LT E K RT L 8 1 8 7 W i r e l e s s L A N D r i v e r a n d

Utility→REALTEK RTL8187 Wireless LAN Utility, to open management

application program.

Picture-4.1

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: