MSP-430-PAD-2.pdf

MSP430-PAD-2

MSP430F123 Prototype Adapter

Features

TEST

VCC

P2.5/Rosc

VSS

XOUT

XIN

RST/NMI

P2.0/ACLK

P2.1/INCLK

P2.2/CAOUT/TA0

P1.7/TA2/TDO/TD

P1.6/TA1/TDI

P1.5/TA0/TMS

P1.4/SMCLK/TCK

P1.3/TA2

P1.2/TA1

P1.1/TA0

P1.0/TACLK

P2.4/CA1/TA2

P2.3/CA0/TA1

• MSP430F123

• On board 32Khz Crystal

• Trough hole mountable

• Small size 0.100" grid layout

• MSP430-DLA-1 (Downloader

Adapter) on board compatible

connector

P3.0/STE0

P3.1/SIMO0

P3.2/SOMI0

P3.3/CLK0

P3.7

P3.6

P3.5/URXD0

P3.4/UTXD0

Overview

The MSP430-PAD-2 is prototyping adapter to aid in the development of F123 and F122 Family

of Texas Instruments Mixed Signal Microcontrollers. The MSP430-PAD-2 can be mounted

directly on a protoboard or can wire wrap or solder the MSP430-PAD-2 directly to a Perf.

Board.

The MSP430-PAD-2 provides a 2x5 male IDC header for direct connection to the MSP430-

DLA-1 (Downloader Adapter) to act as a pod in your target system. You can download code

and test your prototype as you develop.

The MSP430-PAD-2 comes with an on board 32Khz quartz crystal ideal for developing ultra-

low power real time projects.

The MSP430-PAD-12 is assembled with the MSP430F123IDW that provides the following

features:

• Low Supply Voltage Range 1.8 V to 3.6 V

• Ultralow-Power Consumption

• Low Operation Current,

• Five Power Saving Modes:

• Wake-Up from Standby Mode in 6 us

• 16-Bit RISC Architecture, 125 ns Instruction Cycle Time

• 16-Bit Timer with Three Capture/Compare Registers

• Slope A/D Converter with External Components

• On-Chip Comparator for Analog Signal Compare Function or Slope A/D Conversion

• 4KB ROM, 256B RAM

EXPERTiS Tecnología S.A. de C.V.

Rio Pánuco 307 Col. Tecnológico, Monterrey N.L. México C.P. 64700, Tel, + (52)-8-3876292,

www.expertis.com.mx

1/2

MSP430-PAD-1 Technical Data*

Power

Voltage

1.8 V to 3.6 V (>2.1V required for programming)

Current

1.3 uA at 4 kHz, 2.2 V

160 uA at 1 MHz, 2.2 V

Standby Mode: 0.8 uA RAM Retention Off Mode: 0.1 uA

Power saving modes

Peripherals

CPU

16 bits RISC

I/O Lines

Timer

Type A, 16 bits

UART

Hardware

Analog comparator

A/D

Slope

Watchdog

16 bits

Serial programming

interface

2x5 IDC male header directly compatible with MSP430-

DLA-1

Crystal

32Khz +/- 20ppm

Internal Oscillator

Up to 1Mhz

Memory

ROM

8KB of Multiple times programmable flash

RAM

256 bytes

Physical

1.280"

0.700"

0.230"

0.025"

0.100 "

1.400"

* For a full description of the MSP430F123 please refer to the Texas Instruments data sheet SLAS312

PRELIMINARY INFORMATION

This data sheet contains design specifications for product development. The specifications may change in any

manner without notice

2/2

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: