DH-LSP10_EN_WEB.pdf

DH-LSP 300-500 kg

www.dhollandia.com

DH-LSP 300-500 kg

Application

The cantilever lift DH-LSP 300-500 kg is specially designed for factory built panel vans. This ingenious concept, originally developed

by Dhollandia, is particularly suitable for the following types of vans :

CITROËN JUMPER / RELAY

FIAT DUCATO

FORD TRANSIT

MERCEDES SPRINTER / VITO

PEUGEOT BOXER

RENAULT MASTER / TRAFIC

OPEL MOVANO / VIVARO

VOLKSWAGEN LT

NISSAN INTERSTAR / PRIMASTAR

Its tting is very easy. The pre-assembled tail lift is simply bolted to the chassis of the van by means of custom-made tting plates.

Except for mounting the exterior controls, no modi cations to the body are required.

General Speci cations

PLATFORM

•

Light weight aluminium platform with non-slip surface

FUNCTIONALITY - MECHANICAL CHARACTERISTICS

•

Hydraulic automatic tilting at ground level

•

Platform tilt adjustable at any position from the exterior controls

HYDRAULIC INSTALLATION

•

[1]

2 lift cylinders for maximum platform stability

1 tilt cylinder with spring assisted platform opening

•

Electric safety valves integrated for all movements

•

Manual emergency operation on all electrovalves

•

Cylinder piston rods in chromed stainless steel (INOX)

ELECTRICAL CONTROLS

•

Waterproof external control box to be mounted into the side panel of the vehicle

body [1]

•

Controlled without electronic components

FITTING OF THE LIFT

Very fast installation is made possible by :

•

Bolt-on mounting plates adapted for each type of vehicle [2]

•

[2]

Compact hydraulic power pack premounted on the lift frame [3]

(see technical speci cations)

•

Thanks to the unique shape of the lift arms , cut-outs in the vehicle chassis and

body are not required

•

End stops for the lift arms are premounted on the lift frame

FINISH - MAINTENANCE

•

Equipment conforms with CE safety Directives

•

Low maintenance bushes tted to all pivot points

•

Finish on main steel components : zinc phosphate, KTL epoxy primer and polyester

powder top coat

[3]

www.dhollandia.com • info@dhollandia.be • UK : info@dhollandia.com

Technical speci cations

Lift capacity 300 - 500 kg

Standard platform dimensions 1300 - 1550 x 1450 mm (D x W)

Centre of gravity of the load 500 mm

Choice between lifts arm centres Standard width + premounted power pack = 690 mm

Small arm width centre (separate power pack) = 460 mm

Contact your DHOLLANDIA agent for con rmation according to the type of vehicle (brand, wheelbase,

overhang)

Proper weight indications (*) Platforms 1300 mm : from 185 kg onwards

Platforms 1550 mm : from 200 kg onwards

(*) The proper weights mentioned are indicative and may vary according to the execution of the tail lift. Dhollandia retains the right to modify technical data without prior notice.

Main options (other options on request)

S001

2-button wander lead with

spiral cable

2-button wander lead with

S006

4-button foot control tted

onto the platform

S009

4-button remote control

(restricted conditions for use)

S001

S006

S009

S243

Aluminium bridge plate

S090

Platform lights mounted

onto the platform

S243

Aluminium bridge plate

S215.M

Manual roll stops

S215 M

Manual roll stops

S090

Platform lights mounted

S215.A

Automatic roll stops

S610

Anodised aluminium

platform

S371

Preparation for (demount-

able) ball coupling ( tting

support only)

Preparation for (demount-

S604

Kit for mounting without

rear doors

S371

S604

Kit for mounting without

S610

Anodised aluminium

S660...662

Various platform ags

DH-LSPZ 300-500 kg

Application

The DH-LSPZ 300-500 kg is a special execution of the DH-LSP, equipped with a half-width platform. One of the rear doors of the

vehicle body is kept clear, so that the operator has a quick and free access to the cargo space inside the vehicle body at all times,

without having to open the tail lift platform.

The DH-LSPZ with folding platform (option S238) combines the free access to the cargo space with the lifting facilities of a

standard, full-width platform.

DH-LSPZ standard execution

•

• Suitable for loading / unloading wheeled trolleys, heavy

packages, household equipment, etc…

Free and unobstructed access to the loading space inside

the van when platform stands in closed position

•

1/2 width platform , 700 mm wide x 1300 or 1550 mm deep

All other characteristics as per standard DH-LSP

DH-LSPZ with folding platform (option S238)

•

Special concept, combining free access to the cargo space

with lift facilities and lift power of a full-width DH-LSP

Optional : the driver can choose to stow the platform in 1/2

width position or in full-width position, according to his needs

on the next load / unload station

If no lift is required at the load / unload station, the driver

can access the cargo space inside the van without ob-

struction or loss of time

•

Foldable full-width platform , 1450 mm wide x 1300 or

1550 mm deep

•

Suitable for loading / unloading all kinds of load, including

pallets , wheeled trolleys, heavy packages, household

equipment, etc…

- If, however, heavy loads must be handled, the platform

can be opened to horizontal position and unfolded to a

full-width platform in a matter of seconds

•

All other characteristics as per standard DH-LSP

www.dhollandia.com • info@dhollandia.be • UK : info@dhollandia.com

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: