BA_PP_17-I_PROFIsafe_e.pdf

Preface

SIMATIC HMI HMI device PP 17-I PROFIsafe

______________

Overview

Safety Instructions and

General Notes

______________

SIMATIC HMI

______________

Planning Application

HMI device

PP 17-I PROFIsafe

______________

Mounting and Connecting

Control Elements and

Displays

______________

Operating Instructions

______________

Configuring the HMI device

______________

Fail-safe Mode

______________

Maintenance and servicing

______________

Technical Data

______________

Appendix

______________

Abbreviations

Order No. 6AV3991-1XB01-0AB0

05/2006

A5E00430188-02

Safety Guidelines

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

Danger

indicates that death or severe personal injury will result if proper precautions are not taken.

Warning

indicates that death or severe personal injury may result if proper precautions are not taken.

Caution

with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.

Caution

without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.

Notice

indicates that an unintended result or situation can occur if the corresponding information is not taken into

account.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The device/system may only be set up and used in conjunction with this documentation. Commissioning and

operation of a device/system may only be performed by qualified personnel. Within the context of the safety notes

in this documentation qualified persons are defined as persons who are authorized to commission, ground and

label devices, systems and circuits in accordance with established safety practices and standards.

Prescribed Usage

Note the following:

Warning

This device may only be used for the applications described in the catalog or the technical description and only in

connection with devices or components from other manufacturers which have been approved or recommended

by Siemens. Correct, reliable operation of the product requires proper transport, storage, positioning and

assembly as well as careful operation and maintenance.

Trademarks

All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this

publication may be trademarks whose use by third parties for their own purposes could violate the rights of the

owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Siemens AG

Automation and Drives

Postfach 48 48

90437 NÜRNBERG

GERMANY

Order No.: 6AV3991-1XB01-0AB0

Edition 06/2006

Technical data subject to change

Preface

Purpose of the Operating Instructions

This operating instruction manual provides information based on the requirements defined by

DIN 8418 for mechanical engineering documentation. This information relates to the device,

its place of use, transport, storage, installation, use and maintenance.

These operating instructions are intended for:

• Project planning engineers

• Users

• Commissioning engineers

• Service technicians

• Maintenance technicians

Read the information provided in the section "Safety Instructions and General Notes" when

using the HMI device in hazardous areas.

Basic Knowledge Required

General knowledge of automation technology and process communication is needed to

understand the operating instructions.

Experience in the use of personal computers and knowledge of Microsoft operating systems

is required as well.

You should also know how to work with the basis software, STEP 7. This information is

provided in the manual, "Programming with STEP 7 V5.3".

In addition, knowledge of safety engineering and system knowledge of fail-safe engineering

are required.

Operating Instructions' Range of Validity

These operating instructions apply to the HMI device PP 17-I PROFIsafe.

PP 17-I PROFIsafe

Operating Instructions, 05/2006, A5E00430188-02

Preface

Information about Fail-safe Operation of the HMI Device

The following sections of these operating instructions contain important information about the

fail-safe operation of the HMI device:

Chapter no.

Title

1.6

Fail-safe Mode

2.2

Standards, Certificates and Approvals

3.7

Prerequisites for fail-safe operation

4.4

Wiring a Standard Component

5.2

Backside HMI Components, LEDs and Ports

Configuring the HMI device

Fail-safe Mode

9.3

Specifications for the Digital Inputs and Outputs

9.4

Response Times

9.5.3

Digital Inputs and Outputs

Position in the Information Landscape

These instructions are part of the SIMATIC HMI documentation. The following provides an

overview of the information available regarding usage of the HMI:

Operating Instructions

• Operating instructions for SIMATIC Push Button Panels

– PP7, PP17-I. PP17-II

– PP 17-I PROFIsafe

• Operating instructions for other SIMATIC HMI devices

– OP 73micro, TP 177micro

– OP 73, OP 77A, OP 77B

– TP 177A

– TP 170micro, TP 170A, TP 170B, OP 170B

– Mobile Panel 170

– TP 270, OP 270

– MP 270B

– MP 370

• Operating instructions (compact) for the SIMATIC HMI devices OP 77B and

Mobile Panel 170

PP 17-I PROFIsafe

Operating Instructions, 05/2006, A5E00430188-02

Preface

Documentation for Fail-safe Systems

• System description "Safety engineering in SIMATIC S7"

– Provides an overview of the application, configuration, and function principle of

S7 Distributed Safety and S7 F/FH fail-safe automation systems

– Contains a summary of detailed technical information on fail-safe engineering in

S7-300 and S7-400

– Includes monitoring and reaction time calculation for S7 Distributed Safety and

S7 F/FH fail-safe systems

• Manual / Online-help "S7 Distributed Safety Configuring and Programming"

Describes the configuration of the fail-safe CPU and fail-safe I/O and the programming of

the fail-safe CPU in F-FBD and F-LAD.

• Reference manual "S7-400 Automation Systems, CPU data"

Describes the standard functions of the CPU 416F-2

• Reference manual "S7-300 Automation Systems, CPU data"

Describes the standard functions of the CPU 315F-2 and CPU 317F-2

Online Availability

Technical documentation on SIMATIC products and SIMATIC systems is available in PDF

format in various languages at the following addresses:

• SIMATIC Guide Technical Documentation in German:

" http://www.ad.siemens.de/simatic/portal/html_00/techdoku.htm "

• SIMATIC Guide for Technical Documentation in English:

" http://www.ad.siemens.de/simatic/portal/html_76/techdoku.htm "

You will find the valid GSD file for the HMI device and the FB "F_PP17I_SIL3" needed for

attaining SIL3/Cat. 4 on the Internet at the following URL:

" http://www.siemens.com/automation/support "

Screens

The HMI device is sometimes shown in the form of photographs in these operating

instructions. The photographs of the HMI device may differ slightly from the factory state of

the HMI device.

Conventions

Text is highlighted as follows to simplify reading the operating instructions:

Notation

Scope

"Add screen"

Terminology that appears in the user interface, e.g., dialog

names, tabs, buttons, menu entries

Required parameters such as limit values, tag values

Path information

"File > Edit"

Operation sequences such as menu commands, context menu

commands

Keyboard operation

PP 17-I PROFIsafe

Operating Instructions, 05/2006, A5E00430188-02

iii

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: