Cabinets - HOME BAR PLANS.pdf - Projekty - stolarstwo - nisaczek

HOME BAR PLANS

Attach Drawer Slides to Cleats

If you will be adding drawers to your bar, attach six drawer slides to cleats as

shown above. Remember, three must have the roller on the right and three must

have the roller on the left. The lowest part of the drawer slide must be flush with

the bottom of the cleat. The roller section must protrude past the end of the cleats

by 3/4" (the thickness of the trim).

Attach Drawer Slides Left Side and Divider

Attach three cleats with drawer slides to the left side as shown above. Attach two

cleats with drawer slides to left divider panel as shown above. Note: The bottom

cleat and drawer slide for the left divider is attached to the bottom with pocket

holes later. It will then provide a way to attach the left divider to the bottom.

Attach Drawer Slides for Wine Racks

If you will be including wine racks, in your bar, attach the drawer slides to the

divider panels as shown. Note: the drawer slides for the wine racks do NOT

protrude 3/4" past the edge of the divider panels. This is because the wine rack

fronts will be flush with the opening while the drawer fronts will be on the

outside of the opening.

Attach Cleats to the Ends of the Bottom

Attach two cleats to the ends of the bottom surface of the bottom plate with

pocket hole screws as shown.

Attach Cleats to Middle of Bottom

Attach a cleat with a drawer slide mounted to the top surface of the bottom plate

as shown. Attach a cleat with no drawer slide as shown. Pocket holes sides should

be placed 16" from the ends with pocket hole sides facing each other as shown.

(These cleats are used for mounting the vertical panels to the bottom surface.)

Attach Vertical Dividers

Attach the vertical dividers to the cleats as shown. Attach the front cleat between

the panels as shown with pocket hole screws. Oops! I forgot to draw the drawer

slides on this drawing. They would already be in place at this point. Jujst try to

picutre them already mounted.

Attach the Kick Panel

Cabinets - HOME BAR PLANS.pdf