S2U2 Change Log =============== Changes of v1.62 ================ - the notification pop-up can now be dismissed (only on S2U2) by tapping anywhere a while outside the pop-up area; To redisplay it, tap the corresponding notification icon. - added option to turn on/off the individual preview of SMS, MMS & Email. Please note that since I have no where to test the MMS (my device treats it as SMS), so it may not work. - the "slide to view" has extended to all notification icons. e.g. when a missed-call icon shown; tap the icon & it'll be highlighted; slide the slider will open the call history. - added option to custom the applications opened by "slide to view" by editing the registry: They are under HKEY_CURRENT_USER\Software\A_C\S2U2\S2VEXE, named 0File, 0Parameters, 1File, 1Parameters,... 8File, 8Parameters. 0 - missed call; 1 - voice mail; 2 - SMS; 3 - MMS; 4 - email; 5 - Flexmail; 6 - WL Messenger; 7 - reminder; 8 - active task. e.g. when there is a missed call, open iContact's call history instead of the system call history, edit 0File to \Program Files\iContact\iContact.exe; and 0Parameters to -recents (the path may be different on different language device & where it's installed). - added option to disable pressing the power button to end an incoming call. - fixed a potential memory leak introduced in v1.60/1.61. - fixed the incomplete backup created when saving the settings in S2U2 Settings. - fixed the occasional problem that the system hangs on the CallerID screen. - a few minor bugs fixed. Changes of v1.61 ================ - fixed the system alarm went off automatically in v1.60. - removed the auto-turn-on "Don't suspend power" in v1.60 when there is data connection; as it caused power drain. Changes of v1.60 ================ - added option to lock most of the system notifications (alarm, reminder, sms/mms & email notice) when the device is locked. To dismiss the notification on S2U2 (not on the system), either press the Power button or wait for the backlight turns off. There are also options to auto-dismiss the notifications on the system & to show a preview of the SMS/email when locked. When a notification is shown on S2U2, unlock the device ("slide to view") will open the corresponding application. - added option to delay the email preview. Set a longer delay if your device alerts the new email notification much later than the email preview. - added a command switch -password for iLock2 to trigger the password lock immediately if the password is set. Run iLock2.exe -password will turn on the password lock immediately no matter how long the "require password" is set. Append the iLock2 startup link with -password will trigger the password lock immediately after soft-reset. However, even with this option added, it does not mean S2U2 is a highly secure password lock. - added the back button in the password entry screen; it shares the same position of the clear button. - added a small-style clock - "clockS", included in the clock pack file. - added option to set up a 2nd clock (both format & clock path). To switch between the 1st & 2nd clock, tap the clock area. e.g. switch between digital (clock) & analog (clockA); or between normal & small (clockS). To not to use the 2nd clock, leave the path of the 2nd clock to blank. - added option to set the Vibration LED. If S2U2 does not vibrate even "Haptic Feedback" is turned on, try to change the value of the Vibration LED; then turn on or off the "Haptic Feedback" to test it. e.g. the Vibration LED of Omnia is 11. - added option to show Owner's Information (name & phone) at the bottom. - added option to hide All-Day appointment. - added option to do not lock the TouchFLO 3D. Enable it if the TouchFLO 3D restarts/quits unexpectedly when S2U2 is running, but the Home key will not be locked as before. - change the Wallpaper settings in the registry will trigger S2U2 to change it's wallpaper immediately. - when save the settings by S2U2 Settings, a setting backup file "S2U2 Settings.reg" will be saved. - removed option "Power Save" as the power leak problem is found & fixed. Please read the FAQ if your device still has power leak when running this version. - removed option "Don't double check Backlight" as it does not work on some devices. - removed the command switch -refresh of iLock2 as it does not work in some cases. (actually, it'd been removed since v1.5x) - fixed the occasional problem that the system hangs on the CallerID screen after rejected an incoming call. - fixed the occasional problem that the unread count of Flexmail cannot be shown. - some minor bugs fixed. Changes of v1.52 ================ - added option to determine how often the password is required. - added an unread icon to show the number of pending system notifications (e.g. alarm, reminder). - added option to turn off the topmost curtain (above the top curtain) separately. - fixed the v1.50 issue of starting S2P when Bluetooth headset was connected. - fixed the v1.50 issue that S2P control might disappear after pressing any control key. - fixed the v1.50 issue that Pocket Weather was not shown. - fixed the v1.50 issue of occasionally high CPU usage during idle. - save more power than the old version when the device is sleeping. - some graphics changed. - a few minor bugs fixed. - included wallpaper files for WQVGA & WVGA devices. Changes of v1.50d ================= - fixed the bugs (screen freezed; clockD shifted; keys not locked) introduced in v1.50 Changes of v1.50 ================ - added animated transitions. - added Password lock, set/change the password via S2U2 Settings. But please don't treat it as a highly secure system lock. However, if you want S2U2 locks quicker after soft-reset, replace the iLock2.lnk in \Windows\StartUp with S2U2.lnk (in \Windows\Start Menu\Programs\S2U2). - added option to ask to send a busy SMS after rejected an incoming call. The default content of the busy SMS is stored at lang.ini (make sure the lang.ini is saved in UNICODE format). - added option to hide S2P control & album cover even S2P is running. - added options (AppointmentLine & AlignAppointment) to change the format the Appointment info shown. - optionally to display the operator's logo. The logo filename must exactly match with the operator's name with PNG extension (e.g. orange.png); it must be placed under the folder GFX\Operator; For QVGA device, the logo has to be smaller than 16 pixels high; while for VGA, it has to be smaller than 32 pixels high. Since there are a lot of operators in the world, only a few samples are included in the installation. To switch back to display operator in text, delete the Operator folder & restart iLock2. - added optional Haptic Feedback, but it may not work on some devices. - added a flight mode icon. - added to show the caller number property when the system found it. - added a second-hand to analog clock. To turn it on, the clock folder must have cs0.png ~ cs14.png. To turn it off, remove cs0.png ~ cs14.png from the clock folder. - added a Diamond-style clock - "clockD", but no flipping animation). Both new clock styles are included in the S2U2ClockPack.rar. - removed options "BlankStart" & "SafeMode" which caused confusion & malfunction in the past. - fixed the Home key lock of Touch Diamond/Pro/HD. - fixed the occasional problem that under Power Save mode, the device behaved weirdly when another program running in the background (again). - "NoPowerSuspend" now works under Power Save mode as well. But not sure will the power be saved anymore as they are conflicting each other. - fixed the occasional problem that the system hang at the CallerID screen. - added CallerID support to Turkish device. - hide "Top Curtain" will also hide the topmost grey curtain. - added an Excel file to descrip the detail settings of S2U2. - some graphics changed. - some minor bugs fixed. Changes of v1.45 ================ - lock the Home key of Touch Diamond/Pro/HD. - fixed the occasional problem that the date of an appointment was shown incorrectly. - fixed the occasional problem that under Power Safe mode, the device behaved weirdly when another program running in the background (again). - a few minor bugs fixed. Changes of v1.44 ================ - added one more choice when the headphone is disconnected, close both S2P & Bluetooth. - fixed the occasional problem that the same appointment was shown twice. - fixed the occasional double lock problem. - fixed the occasional problem that under Power Safe mode, the device behaved weirdly when another program running in the background. - fixed the occasional problem that the temperature was always shown as zero. - some minor bugs fixed. Changes of v1.42 ================ - added option "Vibrate On Connect" to vibrate the phone shortly when a call is connected. - fixed the occasional problem that the system is locked after an incoming call is connected. Changes of v1.41 ================ - added option "Slider Inertia" to tune the inertia of the slide button. - fixed the occasional problem that the system is locked after dialling out (again). - fixed the occasional problem that the system will be shut down when the screen is blanked during a phone call. Changes of v1.40 ================ - added option "Power Save Mode"; default is on (1). It aims to save the power: 1. by stopping all S2U2's activities when the device is turned off (including when the screen is off only); 2. by not interfering the power management which is already done by the OS; 3. suggest users to try it with the default values of "Safe Mode" (0) & "Don't Suspend Power" (0); 4. suggest to soft-reset the device after the installation of this version or changed this setting. (How...
thomyk