BMSE703GBD.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE

BMW

MOD.

SERIE 7

YEAR 03 ﬁ

PETROL

DIESEL

ALARM/SIREN

POSITION

Position the compact alarms and the sirens in the engine compartment.

CENTRAL UNIT POSITION

Position the modular sistems and the modules under, on the left of the dashboard, driver’s

side.

POWER SUPPLY

+30: connect directly to the big wire coming out of the battery terminal. It is suggested such

connection as some connections with fixed supply are deactivated by the electronic system of

the vehicle after about 30 min. from the extinction of the switchboard.

-31: connect with a cable terminal directly to the ground terminal located behind the driver’s

side sill cover.

IGNITION WIRE

+15/54: connect to the BLACK/RED wire, at the position nr. 19 coming out of the 32 way black

connector of the “battery cut out” central, in the passenger’s side boot. As alternative

connect to the 1,5mm 2 GREEN/BLUE wire located in the wiring harness behind the driver’s

side sill cover.

DIRECTION INDICATORS

Connect to the wires: BLUE/GREEN pos. nr.4 for the driver’s side front door, BLUE/BROWN

pos. nr.1 for the passenger’s side rear door, BLUE/BROWN pos. nr.24 for the passenger’s

side front door, BLUE/GREEN pos. nr.55 for the driver’s side rear door, located in the 88 way

black connector coming out of the lights operating central located on the left of the steering

column. It is suggested to separate the lines by means of 4 diodes.

ELECTRIC WINDOWS

Positive control signal

Doors and windows Comfort locking

Connect to the BLUE/RED wire at the position nr.7 (lock) and to the WHITE/BLACK wire at the

position nr.9 (unlock), located in a 18 way black connector, directly on the coming out of the

push-button panel inside the driver’s side door.

CENTRAL DOORS LOCKING Negative control signal

Connect with both the (VIOLET and ORANGE) wires of the antitheft to the YELLOW/RED wire

at the position nr.24, of the 26 way white connector, directly coming out of the central locking

unit located behind the passenger’s side glove compartment

IMMOBILISATION POINT 1

Gasoil pump

Cut the BLUE/BLACK wire, in the 13 way black connector, of the white central located behind

the passenger’s side glove compartment.

IMMOBILISATION POINT 2

General ignition wire

Cut the BLACK/YELLOW wire in the connector coming out of the ignition key.

STARTER

+50: Cut the 2mm 2 BLACK wire located in the wiring harness coming out of the MOTRONIC

central placed in the lower part of the antipollen filter, in the engine compartment.

BONNET SWITCH

Connect to the wire coming out of the lamp directly in the bonnet/engine.

DOORS SWITCH

NOTE: the polarity is positive. Invert the signal with an additional relay. Connect to the

RED/BLUE wire located in the wiring harness coming out of the lamp of the driver’s side

rudder pedals. As alternative: at the position nr.20, in a black connector of the white central

located behind the passenger’s side glove compartment.

BOOT SWITCH

Connect to the YELLOW/BLACK wire, at the position nr.19, of the 26 way white connector,

directly coming out of the white central placed behind the passenger’s side glove

compartment.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

bmse703gbd.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: