# is a comment line # # Each line of this file must be of the following comma separated format # # C1,C2,C3,val1:val2 # # C1 = column 1 is the ANSA NAME of entity to check. ANSA name is the name inside the # brackets[] in each entity EDIT card (look on the title bar of the EDIT card.). # # C2 = column 2 is the DECK. (NASTRAN or LS-DYNA or PAM-CRASH or ABAQUS or # ANSYS or RADIOSS) # # C3 = column 3 is the LABEL of the value to be checked as it shows up in EDIT Card. # # C4 in format val1:val2 is the range in which the value of the LABEL must lie inside. # val1 must be less then val2 (val1<val2) # # if val1 is omitted, -INF is assumed (no lower limit) [-oo, val2] # if val2 is omitted, +INF is assumed (no upper limit) [val1, +oo] # # A simple sample check to confirm that all "PSHELL" (the ANSA name) of "NASTRAN" (the deck) # thicknesses "T" (the LABEL on the EDIT card) lie among 0.3 (lower limit) and above is PSHELL,NASTRAN,T,0.3: # Some other checks for materials values also follow MAT1,NASTRAN,NU,0.0:0.5 MAT1,NASTRAN,E,1000.:210000. MAT1,NASTRAN,RHO,0.0:7.85e-009 MAT2,NASTRAN,RHO,0.0:7.85e-009 MAT3,NASTRAN,EX,1000.:210000. MAT3,NASTRAN,ETH,1000.:210000. MAT3,NASTRAN,EZ,1000.:210000. MAT3,NASTRAN,NUXTH,0.0:0.5 MAT3,NASTRAN,NUTHZ,0.0:0.5 MAT3,NASTRAN,NUZX,0.0:0.5 MAT4,NASTRAN,r,0.0:7.85e-009 MAT5,NASTRAN,RHO,0.0:7.85e-009 MAT1,LS-DYNA,E,1000.:210000.
corncholio