IBM-OPTRA-4039.pdf

Lexmark LaserPrinter

4039-1XX

• TableofContents

• StartDiagnostics

• SafetyandNotices

• Trademarks

• Index

• ManualsMenu

LexmarkandLexmarkwithdiamond

designaretrademarksofLexmark

International,Inc.,registeredinthe

UnitedStatesand/orothercountries.

Second Edition (June 1996)

The following paragraph does not apply to the United Kingdom or any country

where such provisions are inconsistent with local law: LEXMARK

INTERNATIONAL, INC. PROVIDES THIS PUBLICATION “AS IS” WITHOUT

WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer

of express or implied warranties in certain transactions, therefore, this statement

may not apply to you.

This publication could include technical inaccuracies or typographical errors.

Changes are periodically made to the information herein; these changes will be

incorporated in later editions of the publication. Improvements or changes in the

products or the programs described in this publication may be made at any time.

Publications are not stocked at the address given below; requests for publications

should be made to your point of purchase.

A form for reader’s comments is provided at the back of this publication. If the form

has been removed, comments may be addressed to Lexmark International, Inc.,

Department D22A/035-3, 740 New Circle Road NW, Lexington, Kentucky 40550,

U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd.,

Marketing and Services Department, Westthorpe, Marlow Bucks SL7 3RQ.

Lexmark may use or distribute any of the information you supply in any way it

believes appropriate without incurring any obligation to you.

UNITED STATES GOVERNMENT RESTRICTED RIGHTS

This software and documentation are provided with RESTRICTED RIGHTS. Use,

duplication or disclosure by the Government is subject to restrictions as set forth in

subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software

clause at DFARS 252.227-7013 and in applicable FAR provisions: Lexmark

International, Inc., Lexington, Ky 40550.

Notices and Safety Information

References in this publication to products, programs, or services do

not imply that the manufacturer intends to make these available in all

countries in which it operates. Any reference to a product, program,

or service is not intended to state or imply that only that product,

program, or service may be used. Any functionally equivalent

product, program, or service that does not infringe any existing

intellectual property rights may be used instead. Evaluation and

verification of operation in conjunction with other products,

programs, or services, except those expressly designated by the

manufacturer, are the user’s responsibility.

Electronic Emission Notices

Consult the following list for any emission that may apply in your

country.

Federal Communications Commission (FCC) Statement

This printer has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

•

Consult your point of purchase or service representative for

additional suggestions.

iii

Notices and Safety Information

The manufacturer is not responsible for any radio or television

interference caused by using other than recommended cables or by

unauthorized changes or modifications to this equipment.

Unauthorized changes or modifications could void the user’s

authority to operate the equipment.

Note: To comply with FCC regulations on electromagnetic interfer-

ence, for a Class B computing device, the printer cable must be

shielded.

To assure compliance with FCC regulations for a Class B computing

device, use a properly shielded and grounded IBM cable. Part

numbers for the various interface cables are: part number 1525612

for parallel interface, and part number 8509386 for serial interface.

Use of a substitute cable not properly shielded and grounded may

result in violation of FCC regulations.

Industry Canada Compliance Statement

This digital apparatus does not exceed the Class B limits for radio

noise emissions from digital apparatus as set out in the interference-

causing equipment standard entitled: “Digital Apparatus”, ICES-003

of Industry Canada.

Avis de conformité aux normes d’Industrie Canada

Cet appareil numérique respecte les limites de bruits

radioélectriques applicables aux appareils numériques de Classe B

prescrites dans la norme sur le matériel brouilleur : “Appareils

numériques”, NMB-003 édictée par Industrie Canada.

The United Kingdom Telecommunications Act 1984

This apparatus is approved under the approval number NS/G/1234/

J/100003 for the indirect connections to the public

telecommunications systems in the United Kingdom.

Service Manual

European Community (EC) Electromagnetic

Compatibility Directive

This product is in conformity with the protection requirements of EC

Council directive 89/336/EEC on the approximation of the laws of

the Member States relating to electromagnetic compatibility.

German Statement of Acoustic Emissions

A declaration of conformity with the requirements of the Directive

has been signed by the Director of Manufacturing and Technical

Support, Lexmark International, Ltd., Boigny, France.

This product satisfies the Class B limits of EN 55022.

Notices and Safety Information

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: