Peiying PY-6168U.pdf

Polski

Românã

English

Installation ................................................................................................................ 02

Additional information ........................................................................... 04

General operations ..................................................................................... 05

Radio operations ........................................................................................... 10

CD operations ...................................................................................................... 11

MP3 operations .................................................................................................. 11

Remote operations ....................................................................................... 13

Specification .............................................................................................................. 15

Before playing discs ......................................................................................... 16

Troubleshooting ...................................................................................................... 17

-1-

-2-

Removing the unit

( Fig . 2 )

( Fig . 3 )

1. Dashboard

2. Nut (5mm)

3. Spring Washer

4. Screw (5 x 25mm)

5. Screw

2.Insert fingers into the groove in the

front of frame and pull out to remove

the frame. (When reattaching the

frame, point the side with a groove

downwards and attach it.)

3.Lever

Insert the levers supplied with the

unit into the grooves at both sides of

the unit ad shown in figure until they

click. Pulling the levers makes possible

to remove the unit from the dashboard.

6. Strap

Be sure to use the strap to

secure the back of the unit in

place. The strap can be bent by

hand to the desired angle.

7. Plain Washer

Fastening the unit to the factory

radio mounting bracket:

USA EUR SWITCH

(Optional)

1. Select a position where the screw

holes of the bracket and the

screw holes of the main unit

become aligned (are fitted), and

tighten the screws at 2 places on

each side. Use either truss screws

(5 x 5mm) or flush surface screws

(4 x 5mm)

2. Screw

3. Dashboard or Console

DIN REAR-MOUNT (Method B)

Installation using the screw holes on

the sides of the unit

INPUT THE SD CARD

The SD oblique angle keeps

downward exposure , put into

the SD slot and press it again

to eject .

-3-

-4-

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: