CIC303GBBT.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE CITROEN MOD.

C3*

YEAR 03 ﬁ

PETROL

DIESEL

* Models with original equipment keyless entry system.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens on the driver’s side wheel house, near the

original horns.

CENTRAL UNIT POSITION

Position the modular systems and the modules under the dashboard, driver’s side.

POWER SUPPLY

+30: connect with a cable terminal to a clamp marked ‘+30’ in the feed rod located in the

black box placed on the side of the battery, in the engine compartment.

- 31: connect with a cable terminal to a clamp marked ‘GND’ in the feed rod located in

the black box placed on the side of the battery, in the engine compartment.

IGNITION WIRE

+15/54: connect to the 2,5 mm 2 LIGHT BLUE wire located in the connector coming out of

the ignition key.

DIRECTION INDICATORS

Connect to the GREEN wire at the position nr. 13, marked 1142 and to the WHITE wire

at the position nr.14, marked nr.263, coming out of the 16 way black connector, in the

fuse box.

ELECTRIC WINDOWS

Positive control signal

Timed signal

Refer to the fitting diagram nr. 194.

ACTIVAT./DEACTIVATION

CONTROLS

Connections antithefts/vehicle

Refer to the fitting diagram nr. 196.

IMMOBILISATION POINT 1

Fuel pump

Cut the VIOLET wire at the position nr.9, in the 16 way black connector, behind the left

lateral bulkhead, driver’s side.

IMMOBILISATION POINT 2

Relay pump supply

Cut the LIGHT BROWN wire marked nr. 1235, at the position nr.11, coming out of the

connector marked ‘GRIS’ placed in the driver’s side fuse box, in the engine compartment.

STARTER

+50: Cut the YELLOW wire located in the wiring harness coming out of the 3 way

connector placed on the left of the steering column.

BONNET SWITCH

Install an additional switch on the front headlamp support plate, driver’s side.

DOORS SWITCH

Connect to the wire at the position nr. 32, in the green section of the 40 way white

connector, in the fuse box, under the driver’s side dashboard.

Note: the polarity of the lamp is positive.

BOOT SWITCH

Connect to the BLACK wire, at the position nr. 16, in the grey connection of the 40 way

connector, in the fuse box.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

cic303gbbt.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM NR.196

Diagram for the interfacing of art. 3800 on

CITROEN C3 year 2003

ORANGE YELLOW GREY/BLACK

VIOLET

VIOLET/WHITE

ORANGE/WHITE

YELLOW/BLACK

40 way white 16 way grey

connector connector

nr.27 nr.13

nr.15

ground

+30

Diodes 1N5406

Diode

1N4004

direction

indicator

wire at the pos. nr.13 of the

16 way black connector

driver’s side

door switch

Diode 1N5406

ground ground

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

cic303gbbt.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FITTING DIAGRAM NR.194

Diagram to make the windows locking with automatism on

CITROEN C3 year 2003

Art. 1055

Driver’s side Passenger’s side

window push button window push button

1 2 3 4 5 6 7

+30

BROWN BROWN

BROWN

Diodes 1N5406

CPU CPU

windows windows

central central

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

cic303gbbt.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: