FIPUN99GBB.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

FIAT

MOD. PUNTO

YEAR 99 ﬁ

PETROL

DIESEL

MAKE

ALARM/SIREN

POSITION

Position the compact alarms and the sirens in the engine compartment near the

support of the battery. Pass the cables through the original rubber sleeve near the

brake fluid reservoir.

CENTRAL UNIT POSITION

Position the modular systems and the modules under the dashboard, driver’s side.

POWER SUPPLY

+ 30: connect to the 6 mm 2 WHITE/RED wire located in the multiway connector in

the fuse box.

- 31: connect with a ring terminal to the car body.

IGNITION WIRE

+ 15/54: connect to the 2 mm 2 ORANGE wire located in the connector coming out

of the ignition key.

DIRECTION INDICATORS

Connect to the 1 mm 2 PINK and PINK/WHITE wires in the 40 way black connector

located in the front part of the fuse box.

ELECTRIC WINDOWS

Controls with mixed polarity

Front window, driver’s side:

cut the 2,5 mm 2 WHITE/RED and VIOLET/YELLOW wire.

Front window, passenger’s side:

These connections should be effected in the wiring harnesses coming out of the

original switches of the windows closing.

CENTRAL DOORS LOCKING Negative control signal

Connect to the WHITE/GREEN wire nr. 34 (lock) and light BLUE/VIOLET wire nr.

24 (unlock) in the 40 way black connector located in the front part of the fuse box.

IMMOBILISATION POINT

Fuel pump

Cut the 2,5 mm 2 VIOLET/YELLOW wire located in the wiring harness coming out

of the 30 way black connector in the front part of the fuse box.

STARTER

+50: Cut the wire located at the position marked “+50” directly in the wiring harness

coming out of the ignition key.

BONNET SWITCH

Install an additional switch on the headlamp support plate.

DOORS SWITCH

For the vehicles with 2 doors: connect to the 1 mm2 light BLUE wire

(BLUE/YELLOW wire in the version with 4 doors) in the 40 way black connector

located in the front part of the fuse box.

BOOT SWITCH

Connect to the wire located in the wiring harness coming out of the connector of

the boot lamp.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

fipun99gbb.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: