FISCU99GBD.PDF

(11 KB) Pobierz
FISCU99GBD.PDF
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
MAKE
FIAT
MOD. SCUDO
YEAR 99
PETROL
DIESEL
X
ALARM/SIREN
POSITION
Position the compact alarms and the sirens in the engine compartment, behind the
headlamps, driver’s side. Pass the cables through the original rubber sleeve
located on the bulkhead that divides the engine compartment from the passenger’s
compartment, over the shock absorber, driver’s side.
CENTRAL UNIT POSITION
Position the modular systems and the modules under the dashboard, driver’s side.
POWER SUPPLY
+ 30: connect to the 4 mm 2 RED wire located at the entrance of the fuse box.
- 31: connect with a terminal directly to the car body.
IGNITION WIRE
+ 15/54: connect to the 1,5 mm 2 PINK wire located in the connector on the left in
the fuse box.
DIRECTION INDICATORS
Connect to the WHITE and LIGHT BROWN wires located in the wiring harness
coming from the direction lights switch.
ELECTRIC WINDOWS
Positive control signal
Front window, driver’s side:
cut the 2 mm 2 WHITE wire.
Front window, passenger’s side:
cut the 2 mm 2 YELLOW wire.
The connections are made directly in the wiring harness coming out of the modular
system of the windows unit.
CENTRAL DOORS LOCKING Negative control signal
Connect to the YELLOW wire (unlock) and LIGHT BROWN wire (lock) of the wiring
harness located behind the left lateral bulkhead, driver’s side.
IMMOBILISATION POINT
Gasoil pump
Cut the wire coming out of the inertial switch located in the engine compartment.
STARTER
+50: Cut the wire located in the position marked “+50” directly coming out of the
ignition key.
BONNET SWITCH
Install an additional switch on the headlamp support plate.
DOORS SWITCH
Connect to the YELLOW wire located in the wiring harness behind the left lateral
bulkhead, driver’s side.
BOOT SWITCH
Connect directly to the wire of the boot lamp. Install an additional push button when
a boot lamp is not fitted on.
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
fiscu99gbd.doc
108370420.001.png 108370420.002.png
Zgłoś jeśli naruszono regulamin