maco_M106HV.pdf

(46 KB) Pobierz
Unknown
W
MlO6-HV
Your new MAC0 106HV MAXIBEAM is a new innovation in base station beam design which enables the
vertical and horizontal to be assembled for either 10 or 11 meters.
For example, using the charts supplied, you can assemble the horizontal for 11 meters and the vertical for
10 meters or reverse this or assemble both the same. It does not matter. The vertical and the horizontal do
not affect each other.
THE ONLY DIFFERENCE BETWEEN THE HV BEAMS AND THE INSTRUCTIONS INCLUDED IS
THAT THE HV BEAM HAS BOTH SETS OF ELEMENTS ON THE SAME
BOOM.
PLEASE ADD THE FOLLOWING INSTRUCTIONS TO THOSE SUPPLIED:
MOUNT THE FIRST REFLECTOR WITH THE U-BOLT FACING THE REAR.
MOUNT ITS MATE WITH THE U-BOLT FACING THE FRONT OF THE BEAM.
THIS IS SO THE VERTICAL AND HORIZONTAL ELEMENTS WILL BE CLOSE TO-
GETHER.
DO THE SAME WITH ALL ELEMENTS AND MEASURE THE SPACING ONLY ONCE
PER SET OF ELEMENTS.
THAT’S IT. HAVE AT IT!
IF YOU HAVE ANY PROBLEMS OR QUESTIONS PLEASE CALL 901-794-9494
9 AM TO 5 PM (CENTRAL TIME)
WE’RE HERE TO HELP IF YOU NEED IT!
312144713.051.png 312144713.055.png 312144713.056.png 312144713.057.png 312144713.001.png
MAC0 Ml 06-HV
PARTS LIST
PART
GOlP
POlP
TO1
T04P
TllP
T31P
QTY O.D. SIZE LENGTH DESCRIPTION
CHECKLIST
2
GAMMA MATCH
1
5”x l/4” 8”
PLATE 2” BOOM TO 2” MAST
72” ALUM. TUBING
80 l/2” ALUM. TUBING
72”
ALUM. TUBING SLOTTED BOTH ENDS
80”
ALUM. TUBING SWAGED ONE END, SWAGED
OTHER END 1.835”
T52P
T53P
T57P
VO3P
WD2P
2
2”
.057”
80”
ALUM. TUBING SLOTTED ONE END
1
1.845” .060”
80”
ALUM. TUBING
2
2”
.047”
36”
ALUM. TUBING SWAGED ONE END TO 1.875”
1
1”xl”
24”
VERTICAL GUY SUPPORT
STEEL GUY CABLE
1
6118” 25’
UOl
25
2”
HARDWARE BAG # 1
PLATED U-BOLTS
so1
25
2”
HARDWARE BAG # 2
PLATED SADDLES
EGl
NO1
NO2
Nil
N12
N18
PL2
PL5
PLSR
s21
S42
W58P
ZO2P
ZO8P
4
5116”
HARDWARE BAG # 3
EGG INSULATORS
HEX NUTS
LOCKWASHERS
SQUARE NUTS
LOCKWASHERS
EYEBOLTS
PLASTIC CAPS - BLACK
PLASTIC CAPS - RED
PLASTIC CAPS - BLACK
54
5116”
50
lo-24
30
#lO
6
5/16”
2
.437”
24
2”
1
2”
1
1 O-24
30
2
24
4
4
112”
MACHINE SCREWS
FEM/ COAX CONN. W/MOUNTING NUT
518”
EXTRUDED ALUM. CLAMPS
GAMMA STRAPS
GAMMA STRAPS F/COAX. CONNECTS
BE2P
12
HARDWARE BAG # 4
BOOM TO ELEMENT MOUNTS
M106C
1
SET OF INSTRUCTIONS
WHEN ORDERING REPLACEMENT PARTS, ALWAYS GIVE PART NUMBER AND DESCRIPTION.
PLEASE NOTE: In an effort to keep the price on Mace Antennas down, we have decided not to clean up all the burrs and
rough edges on the parts. We recommend that you deburr and clean up each part with files, sandpaper, etc. so that they go
together easily. We are aware this needs to be done, but have elected not to do it to save you the money we would have to
add to the price of the kit for this service.
312144713.002.png 312144713.003.png 312144713.004.png 312144713.005.png 312144713.006.png 312144713.007.png 312144713.008.png 312144713.009.png 312144713.010.png 312144713.011.png 312144713.012.png 312144713.013.png 312144713.014.png 312144713.015.png 312144713.016.png 312144713.017.png 312144713.018.png 312144713.019.png 312144713.020.png 312144713.021.png 312144713.022.png 312144713.023.png 312144713.024.png 312144713.025.png 312144713.026.png 312144713.027.png 312144713.028.png 312144713.029.png 312144713.030.png 312144713.031.png 312144713.032.png 312144713.033.png 312144713.034.png 312144713.035.png 312144713.036.png 312144713.037.png 312144713.038.png 312144713.039.png 312144713.040.png 312144713.041.png 312144713.042.png 312144713.043.png 312144713.044.png 312144713.045.png 312144713.046.png 312144713.047.png 312144713.048.png 312144713.049.png 312144713.050.png 312144713.052.png 312144713.053.png 312144713.054.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin