shoulder_bag_en - torebka.pdf - Torebki(1) - hazelleyes86

SHOULDER BAG

height 31 cm, width 32 cm

MATERIALS

- 40 cm canvas (e.g. awning canvas)

or similar firm cotton fabric,

width 150 cm

- 30 cm cotton fabric for lining

PATTERN PIECES

cut

1 bag exterior panel

3 bag lining

CUTTING

Draw pattern pieces for bag according to

measurements given in small-scale patterns.

Measurements include 1 cm seam allowances.

Cut bag exterior panels and shoulder straps from

canvas and lining panels from cotton fabric.

8 cm (3 .1”)

SEWING

Seams and hems: Stitch seams with straight stitch.

No seam finish is necessary as the bag is fully lined.

Shoulder straps: Fold shoulder-strap strip in half

lengthwise, wrong sides together, and press fold in

the middle of strip. Turn seam allowances on long

edges of shoulder strap in and topstitch edges

together. Topstitch other edge of shoulder strap.

Construct other shoulder straps in the same way.

Fold and press 7 cm wide hems at top edges of bag

exterior panels. Lay ends of shoulder straps across

hem allowances on bag exterior panels, to their right

side, placing one strap 3 cm from side edge of panel

and the other right next to it. Machine-baste ends

of straps in place.

3 cm

(1.2”)

3 cm

(1.2”)

exterior

panel

Joining bag exterior: Pin bag panels together, right

sides facing, and stitch their bottom and side edges

together. Press seams open. Stitch bottom corners

of bag as follows: Flatten corner, aligning bottom and

side seam, and sew 4 cm line of stitching perpendicular

to bottom and side seams. Repeat for other corner.

35 cm (13.8”)

Joining lining: Construct lining in the same way as

bag exterior; leave 10 cm opening in one side seam

for turning bag right side out.

Joining bag exterior and lining: Place bag exterior

and lining within one another, right sides together,

and stitch top edge of bag (shoulder straps are within

bag between exterior and lining). Turn bag right side

out and close opening on lining.

lining

Finishing: Topstitch top edge of bag close to seam

joining exterior and lining (topstitching is placed

6 cm down from top-edge foldline). Attach each pair

of shoulder straps together at their midpoint with

bar-tack (= short, narrow zigzag).

2 shoulder strap

shoulder_bag_en - torebka.pdf

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: