05_Disassembly & Reassembly(1).pdf

(1889 KB) Pobierz
C:\Documents and Settings\최윤선\...
7. Disassembly and Assembly Instructions
7-1. Disassembly
1
2
1) Unscrew 6 points of the Rear.
※ Caution
1) Be careful not to make scratch and molding
damage!
1) Put up the both side of the REAR with
decomposition tool, and then disassemble the set.
※ Caution
1) Be careful not to make scratch and molding
damage!
3
4
1) Disassemble the CONNECTOR.
※ Caution
1) Be careful not to make scratch and molding
damage!
1) Unscrew 4 points of the Upper
※ Caution
1) Be careful not to make scratch and molding
damage!
7-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
345737808.017.png 345737808.018.png 345737808.019.png 345737808.020.png 345737808.001.png
Exploded View and Parts List
5
6
1) Detach the Lower from the Upper.
※ Caution
1) Be care of scratch and molding damage.
1) Detach the SPK&MOTOR, SLIDE FPCB from
the Connector.
※ Caution
1) Be care of scratch and molding damage.
7
8
1) Detach the LCD from the Upper.
※ Caution
1) Be care of scratch and molding damage.
1) Detach the SUB PBA from the Upper.
※ Caution
1) Be care of scratch and molding damage.
7-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
345737808.002.png 345737808.003.png 345737808.004.png 345737808.005.png 345737808.006.png
Exploded View and Parts List
9
1) Detach the SUB KEY from the Upper.
※ Caution
1) Be care of scratch and molding damage.
7-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
345737808.007.png 345737808.008.png 345737808.009.png
Exploded View and Parts List
7-2. Assembly
1
2
1) Set SUB KEYPAD on the UPPER.
※ Caution
1) Be careful not to make scratch and molding
damage!
2) Be careful not to be damaged on FPCB.
1) Set SUB PBA on the KEYPAD.
※ Caution
1) Be careful not to make scratch and molding
damage!
2) Be careful not to be damaged on FPCB.
3
4
1) Set LCD on the UPPER.
※ Caution
1) Be careful not to make scratch and molding
damage!
2) Be careful not to be damaged on FPCB.
1) Set SPK&MOR FPCB on the LCD.
※ Caution
1) Be careful not to make scratch and molding
damage!
2) Be careful not to be damaged on FPCB.
7-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
345737808.010.png 345737808.011.png 345737808.012.png 345737808.013.png 345737808.014.png
Exploded View and Parts List
5
6
1) Set SLIDE FPCB on the UPPER.
※ Caution
1) Be careful not to make scratch and molding
damage!
2) Be careful not to be damaged on FPCB.
1) After putting SLIDE FPCB into hole in the
middle of LOWER
※ Caution
1) Be careful not to make scratch and molding
damage!
2) Be careful not to be damaged on FPCB.
7
8
1) Screw 4 points.
※ Caution
1) Be careful not to make scratch and molding
damage!
2) Confirm TORQE (1.1~ 1.3 Kgf.Cm)
1) Assemble the SLIDE FPCB to the
MAIN PBA.
※ Caution
1) Be careful not to make scratch and molding
damage!
7-5
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
345737808.015.png 345737808.016.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin