TD200_e.pdf

Preface, Contents

Product Overview and Installation

SIMATIC

Configuring the TD 200

TD 200

Operator Interface

Operating the TD 200

Creating Sample Programs

User Manual

Specifications and Reference

This manual has the order number:

6ES7272-0AA20-8BA0

Multiple CPU Configurations

Troubleshooting

TD 200 Parameters and

Messages

Modifying a TD 200 Configuration

Index

01/2000

Edition 01

Safety Guidelines

This manual contains notices which you should observe to ensure your own per-

sonal safety, as well as to protect the product and connected equipment. These

notices are highlighted in the manual by a warning triangle and are marked as fol-

lows according to the level of danger:

Danger

indicates that death, severe personal injury, or substantial property damage will result

if proper precautions are not taken.

Warning

indicates that death, severe personal injury, or substantial property damage can result

if proper precautions are not taken.

Caution

indicates that minor personal injury or property damage can result if proper

precautions are not taken.

Qualified Personnel

The device/system may only be set up and operated in conjunction with this

manual.

Only qualified personnel should be allowed to install and work on this equipment.

Qualified persons are defined as persons who are authorized to commission, to

ground, and to tag circuits, equipment, and systems in accordance with established

safety practices and standards.

Correct Usage

Note the following:

Warning

This device and its components may only be used for the applications described in

the catalog or the technical description, and only in connection with devices or

components from other manufacturers which have been approved or recommended

by Siemens.

This product can only function correctly and safely if it is transported, stored, set up,

and installed correctly, and operated and maintained as recommended.

Trademarks

SIMATIC , SIMATIC HMI und SIMATIC NET are registered trademarks of

Siemens AG.

The reproduction, transmission or use of this document or its

contents is not permitted without express written authority.

Offenders will be liable for damages. All rights, including rights

created by patent grant or registration of a utility model or design, are

reserved.

Siemens AG

Bereich Automatisierungs- und Antriebstechnik

Geschaeftsgebiet Industrie-Automatisierungssysteme

Postfach 4848, D-90327 Nuernberg

Disclaimer of Liability

We have checked the contents of this manual for agreement with the

hardware and software described. Since deviations cannot be pre-

cluded entirely, we cannot guarantee full agreement. However, the

data in this manual are reviewed regularly and any necessary cor-

rections included in subsequent editions. Suggestions for improve-

ment are welcomed.

Siemens AG 2000

Subject to technical change.

Siemens Aktiengesellschaft

6ES7272-0AA00-8BA0

Positioniermodulfür Abschaltpunktepositionierung

Preface

Purpose

The SIMATIC TD 200 Operator Interface User Manual is a combination user and

reference manual that describes the operation of the TD 200 Operator Interface

Module with an S7-200 programmable logic controller.

Audience

This manual is designed for engineers, programmers, and maintenance personnel

who have a general knowledge of programmable logic controllers and operator

interfaces.

Scope of This Manual

This manual describes the operation for version 2.0 of the TD 200. The order

number for the new TD 200 is 6ES7 272–0AA20–0YA0. This release includes new

features and other operational enhancements. The software described in this

manual is STEP 7–Micro/WIN version 3.1. Previous software versions may appear

and operate differently and may not support all the TD 200 features described in

this manual.

Release Notes

Version 2.0 of the TD 200 includes the following new features:

Supports the simplified Chinese characters and menus

Supports Latin 1 and Cyrillic character sets (Latin 1 is the standard character

set for English and Western European languages)

Supports 187.5 KB communications

Agency Approvals

The SIMATIC S7-200 series meets the standards and regulations of the following

agencies.

Underwriters Laboratories, Inc.:

UL 508 Listed (Industrial Control Equipment)

Canadian Standards Association: CSA C22.2 Number 142 Certified

(Process Control Equipment)

European Community EMC Directive 89/336/EEC and

Low Voltage Directive 73/23/EEC

SIMATIC TD 200 Operator Interface

C79000-G7076-C272-01

iii

Preface

How to Use This Manual

If this is your first experience using an operator interface, read the entire manual. If

you are an experienced user, refer to the Table of Contents or Index to find specific

information.

Related Information

Refer to the following documentation for more detailed information about selected

topics:

SIMATIC S7-200 Programmable Controller System Manual: provides

information about installing and programming the S7-200 Micro PLCs, including

the following topics:

– Installing and wiring the S7-200 CPU and expansion I/O modules, and

installing the STEP 7-Micro/WIN software

– Designing and entering a program

– Understanding features of the CPU, such as data types and addressing

modes, the CPU scan cycle, password-protection, and network

communication

This manual also includes descriptions and examples for the programming

instructions, typical execution times for the instructions, and the data sheets for

the S7-200 equipment.

SIMATIC TD 200 Operator Interface

C79000-G7076-C272-01

Preface

SIMATIC Customer Support Hotline

Open round the clock, worldwide:

Nuremberg

Johnson City

Singapore

SIMATIC Hotline

Nuremberg

SIMATIC BASIC Hotline

Johnson City

SIMATIC BASIC Hotline

Singapore

SIMATIC BASIC Hotline

Local time: Mo.-Fr. 7:00 to 17:00

Phone: +49 (911) 895-7000

Fax: +49 (911) 895-7002

E-Mail: simatic.support@

nbgm.siemens.de

Local time: Mo.-Fr. 8:00 to 17:00

Phone: +1 423 461-2522

Fax: +1 423 461-2231

E-Mail: simatic.hotline@

sea.siemens.com

Local time: Mo.-Fr. 8:30 to 17:30

Phone: +65 740-7000

Fax: +65 740-7001

E-Mail: simatic.hotline@

sae.siemens.com.sg

GMT:

+1:00

GMT:

–5:00

GMT:

+8:00

SIMATIC

Premium Hotline

(fee based, only with

SIMATIC Card)

Local time: Mo.-Fr. 0:00 to 24:00

Phone: +49 (911) 895-7777

Fax: +49 (911) 895-7001

GMT: +01:00

The languages of the SIMATIC Hotlines are generally German and English, in addition, French, Italian and Spanish are

spoken on the authorization hotline.

GMT:

+1:00

SIMATIC TD 200 Operator Interface

C79000-G7076-C272-01

Nuremberg

SIMATIC Authorization Hotline

Local time: Mo.-Fr. 7:00 to 17:00

Phone: +49 (911) 895-7200

Fax: +49 (911) 895-7201

E-Mail: authorization@

nbgm.siemens.de

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: