E957_DL_Tuniken_ENpdf.pdf

burda “easy fashion” E 957 Download patterns

Tunics – Instructions

Burda sizes 34, 36, 38, 40, 42, 44

Length from waist:

A, B: 31 cm (12 1 ⁄ 4 "); C, D: 44 cm (17 1 ⁄ 4 ")

A, C, D: pattern pieces 1 to 5.

B: pattern pieces 1 to 6

Size 34 222222

Size 36 333333

Size 38 444444

Size 40 555

Size 42 666666

Size 44 777777

Materials:

A, Print tunic from page 10

Crepe chiffon, 135 cm (53") wide:

Sizes 34, 36, 38: 2.35 m (2 5 ⁄ 8 yds);

size 40: 2.40 m (2 5 ⁄ 8 yds); size 42: 2.45 m

(2 3 ⁄ 4 yds); size 44: 2.50 m (2 3 ⁄ 4 yds).

0.30 m (12") Vilene/Pellon G 785, 90 cm

(36") wide. Elastic, approx. 5 mm ( 3 ⁄ 8 ")

wide. Sewing thread.

B, Plaid tunic from page 22

Tartan plaid, 140 cm (55") wide:

2.10 m (2 3 ⁄ 8 yds) for all sizes.

Contrasting fabric, 140 cm (55")

wide: 0.45 m ( 1 ⁄ 2 yd).

0.40 m (16") Vilene/Pellon G 785, 90 cm

(36") wide. 6 buttons. Sewing thread.

C, Golden tunic from page 29

Fine lamé knit, 150 cm (59") wide:

Sizes 34, 36: 2.40 m (2 5 ⁄ 8 yds); sizes 38,

40: 2.45 m (2 3 ⁄ 4 yds); size 42, 44: 2.50 m

(2 3 ⁄ 4 yds).

Notions as for view A, plus twin needle.

Recommended fabrics: Lightweight

dress fabrics.

Paper pattern:

The pattern pieces are printed on 32

sheets, each framed by a thin line.

Wait until all of the sheets have

been printed. Lay the sheets in the

correct positions (see extra sheet

with the overview of the printed

sheets). Cut each sheet along the

thin lines at the top and right edges.

Begin with the lower left sheet and

glue all sheets together, exactly on

the thin lines Now cut out the pat-

tern pieces. Note the varying lines

for views A, B, C, and D.

D, Purple tunic from page 38

Satin, 140 cm (55") wide:

Sizes 34, 36, 38: 2.25 m (2 1 ⁄ 2 yds),

sizes 40, 42, 44: 2.30 m (2 5 ⁄ 8 yds).

Matelassé (edging), 140 cm (55") wide:

0.60 m (24") for all sizes.

0.30 m (12") Vilene/Pellon G 785, 90 cm

(36") wide. Sewing thread.

Cutting layouts

A, crepe chiffon,

135 cm wide

Sizes 34 to 44

C, ﬁne lamé knit, 150 cm wide,

Sizes 34 to 40

Important: Seam and hem allowances

are not included on pattern pieces

B, tartan plaid, 140 cm wide

Sizes 34 to 44

Sizes 42 and 44

Cutting:

The cutting layouts, left, show how

pattern pieces should be laid on the

fabric. Make sure that straight grain

lines marked on pattern pieces lie

parallel to selvages or fabric folds.

For view B, fold fabric so that the

fold lies exactly between two plaid

unit or exactly in the center of one

plaid unit.

front, back, and band pieces which

are shown in the cutting layout as

being cut from a single layer of

fabric will be easier to cut out if you

trace each of these pieces 2x and

glue the 2 pieces together, along the

center lines.

B, contrast fabric,

140 cm wide,

Sizes 34 to 44

D, satin,

140 cm wide,

Sizes 34 to 44

Tunic A, C, D:

1 Front, on fold

For a double layer of fabric, the right

side is facing in. For a single layer of

fabric, the right side is facing up.

Tunic B: Pay attention to plaid.

2 Back, on fold

3 Sleeve

4 Front band, on fold

5 Back band, on fold

S. 1 v. 3

burda Download E 957, Anleitung Tuniken

S. 2 v. 3

For view A only:

a) 4 bands (ties), each 60 cm (24")

long, 6 cm (2 1 ⁄ 2 ") wide (incl. allowances),

b) 2 bias strips for sleeve ties, each

70 cm (28") long, 4 cm (1 5 ⁄ 8 ") wide

(incl. allowances).

For view D only, contrasting fabric:

strips for hem edging, for

size 34, total of 5.65 m (6 1 ⁄ 4 yds),

size 36, total of 5.70 m (6 1 ⁄ 4 yds),

size 38, total of 5.85 m (6 1 ⁄ 2 yds),

size 40, total of 6.00 m (6 5 ⁄ 8 yds),

size 42, total of 6.10 m (6 3 ⁄ 4 yds),

size 44, total of 6.25 m (6 7 ⁄ 8 yds) long,

6.5 cm (2 5 ⁄ 8 ") wide (incl. allowances),

d) 2 strips for sleeve edging, for

size 34: 1.65 m (65"); size 36: 1.70 m

(67"); sizes 38, 40: 1.75 m (69"); sizes

42, 44: 1.80 m (71") long, 4.5 cm

(1 7 ⁄ 8 ") wide (incl. allowances).

Tunic B:

Tartan plaid:

1 Front, on fold

Sewing:

4. Facing neck edges:

Lay front band piece with no inter-

facing on back band piece with no

interfacing (inner band pieces), right

sides facing. Pin shoulder edges

together. Stitch shoulder seams.

Press seams open. Press allowance

on lower edge of this band unit to

wrong side. Lay inner band unit on

outer band (attached to tunic), right

sides facing. Pin together along neck

edge, matching shoulder seams and

seam lines. Stitch. Trim seam allow-

ances and clip allowances on curves

(4). Turn inner band to inside. Baste

the neck edge and press. Pin lower

edge of inner band to attachment

seam of outer band and sew in place

by hand.

right

fabric side

wrong

fabric side

interfacing

When basting and stitching, the

right fabric sides should be facing.

Tie-off beginnings and ends of

seams with backstitching.

A, Print tunic

1. Gathering neck edges:

On the front and back pieces, machine

baste (= longest stitch setting) close

to both sides of the marked seam

line, from * to *. Hold the bobbin

threads of the machine basting and

slide the fabric together along these

threads until each neck edge matches

the edge of the corresponding band

piece. Knot the gathering threads to

secure the gathering. Distribute the

gathering evenly (1).

2 Back, on fold

3 Sleeve

Contrasting fabric:

4 Front band, on fold

5 Back band, on fold

6 Cuff

Seam and hem allowances:

Use a ruler and tailor's chalk to mark

the following seam and hem allow-

ances on the fabric, around each

pattern piece: 3 cm (1 1 ⁄ 4 ") for hems;

for views A, C, D, 2.5 cm (1") for

sleeve hems, and for views A, B, C,

D, 1.5 cm ( 5 ⁄ 8 ") on all other seams and

edges. Cut out fabric pieces along

these marked lines.

Interfacing:

All pieces which are shaded gray in

the cutting layout should be cut

from interfacing, on the same grain

of the fabric as the corresponding

fabric piece. Seam allowances must

be added. Iron interfacing to the

wrong sides of the outer band and

cuff pieces.

Transferring pattern outlines to

fabric pieces:

Lay interfaced band and cuff pieces

again on corresponding pieces with

no interfacing, right sides together.

Pin the pattern pieces in place again.

Transfer the pattern outlines (seam

and hem lines) and pattern markings

(except straight grain lines) to wrong

side of all fabric pieces using a

tracing wheel and BURDA dress-

maker's carbon paper. Follow the

instructions included with the carbon

paper.

2. Ättaching outer band pieces:

Pin interfaced front band piece to

front neck edge, right sides facing.

Pin interfaced back band piece to

back neck edge, right sides facing.

Stitch bands in place (2). Trim seam

allowances to 7 mm ( 1 ⁄ 4 ") wide. Press

allowances toward band pieces.

Remove the gathering threads which

are visible from the outer side.

5. Attaching sleeves:

Gather upper edge of each sleeve as

described for upper edges of front

and back in step 1. Pin the sleeve to

the attachment edges, right sides

facing. Seam marks (3) must match

and seam lines must match. The

seam mark at center of each sleeve

must meet shoulder seam. Stitch

sleeves in place (5). Finish edges of

seam allowances together. Press the

allowances away from the sleeves.

3. Shoulder seams:

Lay front piece on back piece, right

sides facing. Pin shoulder seams,

matching ends of band attachment

seams. Stitch (3). Press seams open.

Finish edges of allowances.

6. Side seams and sleeve seams:

Lay tunic front on tunic back, right

sides facing. Pin side and sleeve

seams. Stitch seams, leaving each

burda Download E 957, Anleitung Tuniken

S. 3 v. 3

edge. Mark the center of each band.

Sew the band centers to the sleeve

seams, over the elastic casing. Tie

bands in bows.

13. Lower sleeve edges:

Press hem allowances on lower

edges of sleeves to wrong side. Turn

raw edges under so that hem allow-

ances are 1.5 cm ( 5 ⁄ 8 ") wide. Edge-

stitch hems in place. Use a safety pin

as bodkin to pull the elastic into the

lower sleeve edges. Sew the ends of

each elastic together for the follow-

ing ﬁnished widths, for

sizes 34, 36: 19 cm (7 1 ⁄ 2 "); sizes 38, 40:

20 cm (8"), sizes 42, 44: 21 cm (8 1 ⁄ 4 ").

B, Plaid tunic

Sew the tunic as described for the

print tunic, view A, steps 1 to 6. In

addition, topstitch the neck band

close to the attachment seam. Omit

the slits in the side seams and sew

the sleeve seams to the lower edges.

side seam open be-

tween slit marks (for

tie bands) and stitch-

ing only to marked

hem lines on lower

edges of sleeves

(6). Press seams

open. Finish edges

D, Purple tunic

10. Cuffs:

Pin each interfaced cuff piece to a

cuff piece with no interfacing, right

sides together. Stitch edges

together, leaving the attachment

edge open. Trim seam allowances,

trimming diagonally across corners

(9). Turn the cuffs right side out.

Baste the seamed edges and press.

Baste the attachment edges

together. Work buttonholes in the

front edges of each cuff – making

sure that right and left cuff are

mirror images of one another!

Overlap front cuff edge over back

cuff edge, 2.5 cm (1") wide, and pin

in place.

Gather the lower edge of each sleeve

to match the cuff as described for

view A, step 1. Pin cuffs to lower

edges of sleeves, right sides facing.

The front cuff edges must meet the

seam marks on the sleeves. Stitch.

Finish edges of seam allowances

together and press away from cuffs

(10).

of allowances.

Sew the tunic as described for the

print tunic, view A, steps 1 to 6. In

addition, topstitch the neck band

close to the attachment seam. Omit

the slits in the side seams and sew

the sleeve seams to the lower edges.

7. Hem and sleeve hems:

Press hem allowances on lower

edges of tunic and sleeves to wrong

side. Turn raw edges under so that

hem allowances are 1.5 cm ( 5 ⁄ 8 ")

wide. Edgestitch hems in place.

14. Hem:

Finish lower edge of tunic. Turn hem

allowance to inside, baste, and press.

8. Tie bands:

Fold fabric strips (a) for tie bands in

half lengthwise, right side facing in.

Stitch 1.5 cm ( 5 ⁄ 8 ") from fold edge.

Turn each strip right side out. Attach

a doubled thread to one end.

Thread doubled thread through eye

of darning needle and knot securely

(7). Push needle through the fabric

tube, eye end ﬁrst, to turn the tube

right side out (8).

Cut elastic to the following length:

for sizes 34, 36: 2x 25 cm (10"),

for sizes 38, 40: 2x 30 cm (12"),

for sizes 42, 44: 2x 35 cm (14"). Stitch

bands to ends of elastic pieces. Use a

15. Folded edging:

Stitch fabric strips together with 5 mm

( 3 ⁄ 8 ") wide seams, right sides facing.

Press seams open. Finish long edges

of strip. Fold allowances on long

edges to wrong side, press, and

stitch – ﬁnished width for sleeve

edging is 3 cm (1 1 ⁄ 4 ") and for hem

edging, 5 cm (2"). On strip for sleeve

edging, mark pleats following diagram

11. For hem edging, follow diagram

12. On both edgings, begin approx.

3 1,5 3 1,5 3 1,5 3

11. Hem:

Finish lower edge of tunic. Turn hem

allowance to inside, baste, and press.

Working from right side, stitch 2.5 cm

(1") from fold edge.

7 mm ( 1 ⁄ 4 ") from one narrow edge.

Lay pleats in direction of arrows.

Press. Stitch exactly along center of

strip to secure pleats. Then fold

upper and lower corners of each

pleat fold to stitching line and press

(13). Pin edgings along hem edges

of tunic and sleeves, turning ends

under at one side seam or at sleeve

seam. Stitch exactly along stitching

line in center of edging to attach.

safety pin as bodkin to pull the elas-

tic into the hem edges. Knot the end

of each tie band.

9. Lower sleeve edges, casings for

elastic, sleeve ties:

Use a safety pin as bodkin to pull

the elastic into the lower sleeve

edges. Sew the ends of each elastic

together for the following ﬁnished

widths, for

sizes 34, 36: 19 cm (7 1 ⁄ 2 "); sizes 38, 40:

20 cm (8"), sizes 42, 44: 21 cm (8 1 ⁄ 4 ").

Sew bias strips (b) as described for

step 8 to form sleeve ties, but stitch

5 mm (a scant 1 ⁄ 4 ") from the fold

C, Golden tunic

Sew as described for print tunic,

view A, steps 1 to 6. In addition, top-

stitch neck band close to attachment

seam. Omit slits in side seams.

12. Hem:

Finish lower edge of tunic. Turn hem

allowance to inside, baste, and press.

Work from right side with twin needle

to stitch 2.5 cm (1") from fold edge.

All models, pattern pieces, and illustrations are copyrighted. Commercial use is prohibited.

The publishers cannot be held responsible for damages due to improper use of the pattern or materials,

improper carrying-out of instructions or tips, or improper use of ﬁnished models.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: