S7-300_CP342-5_CP342-5FO_e.pdf

(300 KB) Pobierz
CP 342-5 / CP 342-5 FO
SIMATIC NET
S7−CPs for PROFIBUS
Manual Part B1
CP 342-5 / CP 342-5 FO
6GK7 342-5DA02-0XEO
version 2 and higher (firmware version V5.4 and higher)
6GK7 342-5DF00-0XE0
version 2 and higher (firmware version V5.4 and higher)
for SIMATIC S7−300 / C7−300
CP 342-5
CP 342-5 FO
(9-pin
sub-D female
connector)
(Duplex sockets for
optical connectors)
Status and
fault LEDs
Mode selector
Connection for power supply
and functional ground
43517188.009.png 43517188.010.png 43517188.011.png 43517188.012.png
Notes on the Product
Notes on the Product
Note
All instructions in the product information bulletin supplied with this product are
valid and must be adhered to.
Compatibility with the Previous Version
Note
Due to the enhanced functionality and restrictions , pay particular attention to
the notes in Chapter 5 of this manual.
!
Warning
Do not look directly into the opening of the optical transmitting diode or the optical
fiber. The emitted light can cause injury to your eyes.
B1−2
CP 342-5 / CP 342-5 FO for PROFIBUS / Manual Part B1
Release 12/2006
C79000-G8976-C146-08
43517188.001.png 43517188.002.png
Contents
Contents − Part A
PROFIBUS−CPs − General Information
. . . . . . . . . . . . . . . . . . . . . . .
see general part
Note
Please remember that Part A of the manual also belongs to the description of the
CPs. Among other things, this includes an explanation of the safety related notices
and other information that applies to all S7 CPs for Industrial Ethernet.
Part A of the manual: Release 2/2003 or higher.
You can also obtain this general section from the Internet:
Contents − Part B1
Contents
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B1−3
1 Features / Services
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B1−4
2 Installation and Commissioning
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B1−8
3 Displays and Mode Selector
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B1−9
4 Performance Data
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B1−11
4.1
Supported Transmission Rates
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B1−11
4.2
Characteristics of the DP Interface / DP Master
. . . . . . . . . . . . . . . . . .
B1−11
4.3
Characteristics of the DP Interface / DP Slave
. . . . . . . . . . . . . . . . . . . .
B1−14
4.4
Data of S5-compatible Communication
(SEND/RECEIVE Interface) on FDL Connections
. . . . . . . . . . . . . . . . .
B1−15
4.5
Data of S7 Communication
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B1−17
4.6
Characteristics of Multiplexing OP Connections
. . . . . . . . . . . . . . . . . . .
B1−19
4.7
Parallel Use of Communications Services (Multiprotocol Operation)
.
B1−20
5 Compatibility with the Previous Product
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B1−22
5.1
Extended Functionality Compared with Previous Product
. . . . . . . . . .
B1−22
5.2
Replacing Older Modules / Replacing Defective Modules
. . . . . . . . . .
B1−23
6 Technical Specifications
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B1−29
CP 342-5 / CP 342-5 FO for PROFIBUS / Manual Part B1
Release 12/2006
C79000-G8976-C146-08
B1−3
43517188.003.png 43517188.004.png
1 Features / Services
1 Features / Services
Application
The CP 342-5/342-5 FO communications processor is designed for operation in a
SIMATIC S7-300 / C7-300 programmable logic controller. It allows the S7-300 /
C7-300 to be attached to a PROFIBUS fieldbus system.
Services
The current version of the CP 342-5/342-5 FO supports the following
communication services:
PROFIBUS−DP
− as DP master class 1 (PROFIBUS-DP complying with EN 50170 DPV0,
DP master)
− as DP slave (PROFIBUS-DP complying with EN 50170 DPV0, DP slave)
Note
Note that the CP 342-5/342-5 FO can be operated as DP master or DP slave but
not both at the same time. The DP mode can also be completely deselected.
S7 communication and PG/OP communication
− PG functions with upload / download of FM modules, configuration /
diagnostics and routing
− Operator control and monitoring functions (HMI)
multiplexing TD/OP connections
When multiplexing OP connections, the following acyclic services are
supported:
− single read
− single write
− read system status list
B1−4
CP 342-5 / CP 342-5 FO for PROFIBUS / Manual Part B1
Release 12/2006
C79000-G8976-C146-08
43517188.005.png 43517188.006.png
1 Features / Services
− Client and server for data exchange over communication blocks 4 ) on S7
connections configured at both ends
(Notes: Partner station can be an S7−300, S7−400 or PG/PC application
with SIMATIC NET OPC server; raw data variables using BSEND/BRECV to
WinCC are not supported.)
− Server for data exchange on connections configured at one end without
communication blocks in the S7-300/C7-300 station
S5−compatible communication (SEND/RECEIVE interface) over FDL
connections of the following type:
− Specified FDL connections
− Free layer 2 connections (SDA, SDN)
− Broadcast
− Multicast
The CP 342-5/342-5 FO services mentioned above can be used at the same time
independent of each another.
Configuration
To configure the module, STEP 7 version V5.1 or higher is required; for FDL
connections and diagnostic functions, the NCM for PROFIBUS optional package
shipped with STEP 7 must be installed.
The module can be configured via MPI or LAN/PROFIBUS.
Note
If you change the bus parameters in the configuration data, you can only download
the configuration data to the CP via the MPI.
1)
Blocks for S7 communication (see also STEP 7 online help or the
“System Software for S7-300/400 System and Standard Functions” manual) :
BSEND
FB 12
BRCV
FB 13
PUT
FB 14
GET
FB 15
USEND
FB 8
URCV
FB 9
C_CNTRL
FC 62
CP 342-5 / CP 342-5 FO for PROFIBUS / Manual Part B1
Release 12/2006
C79000-G8976-C146-08
B1−5
43517188.007.png 43517188.008.png
Zgłoś jeśli naruszono regulamin