S7-300_FM352-5_e.pdf

(1254 KB) Pobierz
FM 352-5 High Speed Boolean Processor
Preface, Contents
SIMATIC
Product Overview
1
2
Getting Started
FM 352-5 High-Speed Boolean
Processor
Installing and Removing
the FM 352-5
3
4
Wiring the FM 352-5
Configuring the FM 352-5
5
User Manual
Programming and Operating
the FM 352-5
6
Encoder Signals and
their Evaluation
7
Diagnostics and Troubleshooting
8
Using the FM 352-5 with
Non-S7 Masters
9
Appendices
Specifications
A
Parts Lists
B
Index
Edition 04/2003
A5E00131318-03
43517666.006.png 43517666.007.png 43517666.008.png
Safety Guidelines
This manual contains notices intended to ensure personal safety, as well as to protect the products and
connected equipment against damage. These notices are highlighted by the symbols shown below and
graded according to severity by the following texts:
!
Danger
indicates that death, severe personal injury or substantial property damage will result if proper precautions
are not taken.
!
Warning
indicates that death, severe personal injury or substantial property damage can result if proper
precautions are not taken.
!
Caution
indicates that minor personal injury can result if proper precautions are not taken.
Caution
indicates that property damage can result if proper precautions are not taken.
Notice
draws your attention to particularly important information on the product, handling the product, or to a
particular part of the documentation.
Qualified Personnel
Only qualified personnel should be allowed to install and work on this equipment. Qualified persons are
defined as persons who are authorized to commission, to ground and to tag circuits, equipment, and
systems in accordance with established safety practices and standards.
Correct Usage
Note the following:
!
Warning
This device and its components may only be used for the applications described in the catalog or the
technical description, and only in connection with devices or components from other manufacturers which
have been approved or recommended by Siemens.
This product can only function correctly and safely if it is transported, stored, set up, and installed
correctly, and operated and maintained as recommended.
Trademarks
SIMATIC , SIMATIC HMI and SIMATIC NET are registered trademarks of SIEMENS AG.
Third parties using for their own purposes any other names in this document which refer to trademarks
might infringe upon the rights of the trademark owners.
Copyright Siemens AG 2003 All rights reserved
The reproduction, transmission or use of this document or its
contents is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or
design, are reserved.
Disclaim of Liability
We have checked the contents of this manual for agreement
with the hardware and software described. Since deviations
cannot be precluded entirely, we cannot guarantee full
agreement. However, the data in this manual are reviewed
regularly and any necessary corrections included in
subsequent editions. Suggestions for improvement are
welcomed.
Siemens Energy & Automation, Inc.
3333 Old Milton Parkway
Alpharetta, GA 30202
FM 352-5 High-Speed Boolean Processor
A5E00131318-03
Siemens Aktiengesellschaft
A5E000131318-03
Siemens AG 2003
Technical data subject to change.
Index-2
43517666.009.png 43517666.001.png 43517666.002.png
Preface
Purpose of the Manual
This manual describes the purpose, features, and operating functions of the
SIMATIC S7 FM 352-5 High-Speed Boolean Processor Modules
(MLFB: 6ES7352-5AH00-0AE0) and (MLFB: 6ES7352-5AH10–0AE0). This
manual also enables you to install, configure, program, and operate the FM 352-5
modules.
Contents of the Manual
This manual describes the FM 352-5 hardware and the software required to
configure and program the modules. It consists of chapters containing instructions
and reference chapters (technical specifications).
This manual deals with the following topics:
Installing and wiring the FM 352-5 modules
Configuring the FM 352-5 modules
Assigning operating mode parameters to the FM 352-5 modules
Programming the FM 352-5 modules
Operating the modules
Troubleshooting and diagnostics
Related Documentation
Consult the documentation for the SIMATIC S7-300 Programmable Controller
system and the STEP 7 programming software for complete information on
installing and programming the FM 352-5 High-Speed Boolean Processor
Modules.
CD-ROM
The entire SIMATIC Manual Collection is also available on CD-ROM.
FM 352-5 High-Speed Boolean Processor
A5E00131318-03
iii
43517666.003.png
Preface
Standards, Certificates, and Approvals
The FM 352-5 fulfills the requirements and criteria of IEC 1131, Part 2, and the
requirements for obtaining the CE marking. The following agency approvals apply:
FM Class I, Div 2, Group A, B, C, D and cULus Class I, Div 2 Group A, B, C, D.
Please refer to Section A.1 for further details on standards, certificates, and
approvals.
Aids to Finding Information
You can access specific information in the manual by using the following aids:
At the beginning of the manual you will find a comprehensive table of contents
and lists of the figures and tables contained in the manual.
In the different chapters you will find subheadings that allow you to gain an
overview of what is contained in each section.
At the end of the manual you will find a comprehensive index enabling rapid
access to the information you are looking for.
Technical Support
If you have questions concerning the information on the FM 352-5 modules
contained in this manual, contact your Siemens Energy & Automation, Inc.,
distributor or sales office. If you require assistance in contacting your distributor or
sales office in the United States, phone 1–800-964-4114.
For additional technical assistance, call the Siemens Technical Services Group in
Johnson City, Tennessee at 423-461-2522, or contact them by e-mail at
simatic.hotline@.siemens.com . For technical assistance outside the United
States, call +49-911-895-7000.
Constantly Updated Information
You can obtain constantly updated information on the SIMATIC products on the
In addition, SIMATIC Customer Support provides you with up-to-date information
and downloads that can be useful to you when using SIMATIC products:
By means of the SIMATIC Customer Support Mailbox at +49-911-895-7100
To dial the mailbox, use a modem capable of up to V.34 (28.8 kbps) and set its
parameters as follows: 8, N, 1, ANSI. Alternatively, dial in using ISDN (x.75,
64 kbps).
You can contact SIMATIC Customer Support at +49-911-895-7000 or by fax at
+49-911-895-7002. You can also send e-mail or send a message to the above
mailbox.
iv
FM 352-5 High-Speed Boolean Processor
A5E00131318-03
43517666.004.png
Contents
1
Product Overview
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-1
1.1
Functions of the FM 352-5 Module
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2
1.2
Physical Features of the Module
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-4
1.3
System Configurations
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-6
1.4
Modes of Operation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-7
1.5
Overview of Basic Tasks
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-8
2
Getting Started
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-1
2.1
Overview
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-2
2.2
Running the FM 352-5 Example Program
. . . . . . . . . . . . . . . . . . . . . . . . . . .
2-3
3
Installing and Removing the FM 352-5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-1
3.1
Installation Rules
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-2
3.2
Installation in an S7-300 System
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-3
3.3
Installation in a Stand-Alone System
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-4
4
Wiring the FM 352-5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-1
4.1
General Rules and Regulations
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-2
4.2
Terminal Assignments of the Front Connector
. . . . . . . . . . . . . . . . . . . . . . .
4-4
4.3
Wiring the Module
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-8
4.4
Connecting Encoder Cables
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-9
4.5
Connecting Shielded Cables via a Shield Contact Element
. . . . . . . . . . . .
4-11
5
Configuring the FM 352-5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-1
5.1
Installing the Configuration/Programming Software
. . . . . . . . . . . . . . . . . . .
5-2
5.2
Basic Tasks at a Glance
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-4
5.3
Checking the Consistency of Program and Configuration
. . . . . . . . . . . . .
5-5
5.4
Overview of Hardware Configuration
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-6
5.5
Setting Up the Hardware Configuration
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-7
5.6
Assigning Properties and Parameters
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-9
5.7
Selecting Input Filters
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-15
5.8
Saving and Compiling the Hardware Configuration
. . . . . . . . . . . . . . . . . . .
5-17
5.9
Programming Control
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-18
FM 352-5 High-Speed Boolean Processor
A5E00131318-03
v
43517666.005.png
Zgłoś jeśli naruszono regulamin