S7-300_module_RHB_e.pdf

Preface

SIMATIC S7-300 S7-300 Module data

______________

SIMATIC

______________

S7-300 Automation System

Module data

______________

Manual

______________

No. Product Information

The following supplement is part of this documentation:

______________

Other signal modules

Drawing number Edition

Reparameterization steps in

RUN mode

A5E00201782-03

12/2004

______________

Interface modules

Use of subassemblies/modules

in a Zone 2 Hazardous Area

A5E00352937-03

12/2006

______________

This description forms part of the documentation

package with the order number: S7-300 Automation

System: 6ES7398-8FA10-8BA0

______________

08/2006

A5E00105505-04

______________

General technical data

Power supply modules

Digital modules

Principles of analog value

processing

Representation of the analog

values of analog modules

Analog modules

RS 485 Repeater

Parameter sets of signal

modules

Diagnostics data of signal

modules

Dimensional drawings

Spare parts and accessories

for S7-300 modules

Directive on handling

Electrostatic-Sensitive

Devices (ESD)

Support & Service

List of abbreviations

Safety Guidelines

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

Danger

indicates that death or severe personal injury will result if proper precautions are not taken.

Warning

indicates that death or severe personal injury may result if proper precautions are not taken.

Caution

with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.

Caution

without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.

Notice

indicates that an unintended result or situation can occur if the corresponding information is not taken into

account.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The device/system may only be set up and used in conjunction with this documentation. Commissioning and

operation of a device/system may only be performed by qualified personnel. Within the context of the safety notes

in this documentation qualified persons are defined as persons who are authorized to commission, ground and

label devices, systems and circuits in accordance with established safety practices and standards.

Prescribed Usage

Note the following:

Warning

This device may only be used for the applications described in the catalog or the technical description and only in

connection with devices or components from other manufacturers which have been approved or recommended by

Siemens. Correct, reliable operation of the product requires proper transport, storage, positioning and assembly

as well as careful operation and maintenance.

Trademarks

All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this

publication may be trademarks whose use by third parties for their own purposes could violate the rights of the

owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Siemens AG

Automation and Drives

Postfach 48 48

90437 NÜRNBERG

GERMANY

Order No.: A5E00105505-04

Edition 08/2006

Technical data subject to change

Preface

Purpose of the manual

The information contained in this manual can be used as a reference to operating, to

functions, and to the technical data of the signal modules, power supply modules and

interface modules of the S7-300.

How to install, for example assemble and wire, an S7-300 or ET 200M system using those

modules is described in the relevant manuals for establishing the system.

Basic knowledge required

This manual presumes a general knowledge in the field of automation engineering.

Range of validity of this manual

The manual describes the components based on the data valid at the time of its release.

SIEMENS reserves the right of including a product information for each new module, and for

each module of a later version.

Changes compared to the previous version

Changes / enhancements compared to the previous version described in this manual:

● The 'Analog modules' chapter has been revised extensively and split into

– Fundamentals of analog value processing

– Representation of the analog values of analog modules

– Modules overview of analog modules

● Packet assembling of documentation packet changed

● Various corrections were made.

S7-300 Automation System Module data

Manual, 08/2006, A5E00105505-04

iii

Preface

Position in the overall documentation structure

The following documentation forms part of the S7-300 documentation package. You can also

find this on the Internet at: http://support.automation.siemens.com/WW/view/de/ and the

relevant article ID.

Name of the manual

Description

Manual

CPU 31xC and CPU 31x, Technical Data

Article ID: 12996906

Control and display elements, communication, memory

concept, cycle and reaction times, technical data

Operating Manual

S7-300, CPU 31xC and CPU 31x: Installation

Contribution ID: 13008499

Project design, installation, wiring, addressing,

commissioning, maintenance and test functions,

diagnostics and troubleshooting.

System Manual

PROFINET system description

Contribution ID: 19292127

Basic knowledge of PROFINET:

Network components, data exchange and communication,

PROFINET IO, Component-Based Automation,

application sample of PROFINET IO and Component-

Based Automation

Programming Manual

Migration from PROFIBUS DP to PROFINET IO

Contribution ID: 19289930

Guideline for PROFIBUS DP to PROFINET IO migration.

Manual

• CPU 31xC: Technological Functions

Contribution ID: 12429336

• CD containing examples

Description of the technological functions: positioning,

counting, point-to-point coupling, loop control.

The CD contains examples of the technological functions

YOU ARE CURRENTLY READING the Manual

S7-300 Automation System: Module Data

Contribution ID: 8859629

Description of the functions and technical data of signal/

power supply/ interface modules.

Instructions List

CPU 31xC and CPU 31x

Contribution ID: 13206730

List of the CPU's instruction set and corresponding

execution times. Listing of executable blocks.

Getting Started

Available anthology of Getting Started manuals:

• S7-300 Getting Started

Contribution ID: 15390497

• PROFINET Getting Started Collection

Contribution ID: 19290251

The Getting Started documentation provides step-by-step

instructions focused on commissioning a fully functional

application.

S7-300 Automation System Module data

Manual, 08/2006, A5E00105505-04

Preface

Other manuals on S7-300 and ET 200M

Name of the manual

Description

Reference Manual

• CPU Data: CPU 312 IFM - 318-2 DP

• Contribution ID: 8860591

Control and display elements, communication,

memory concept, cycle and reaction times,

technical data

Installation Manual

S7-300 Automation System: Installation: CPU

312 IFM – 318-2 DP

Contribution ID: 15390415

Project design, installation, wiring, addressing,

commissioning, maintenance and test functions,

diagnostics and troubleshooting.

Configuration Manual

ET 200M signal modules for process automation

Contribution ID: 7215812

Description of the integration in process

automation, parameter configuration using

SIMATIC PDM, digital input modules, digital

output modules.

Manual

Distributed I/O Device ET 200M

HART analog modules

Contribution ID: 22063748

Description of configuration and commissioning

of HART analog modules

Manual

Distributed I/O Device ET 200M

Contribution ID: 1142798

Description of project design, assembly and

wiring

Sign posts

The manual contains various features supporting quick access to specific information:

● The manual starts with a table of contents, including an index of the tables contained in

the manual.

● Key terms are explained in the glossary.

● You can use the index to find the key parts of the manual.

Recycling and disposal

The S7-300 components are ecologically compatible, and thus suitable for recycling. For

ecologically compatible recycling and disposal of your old device, contact a certificated

disposal service for electronic scrap.

CE approval

See chapter General technical data > Standards and approvals.

Approvals

See chapter General technical data > Standards and certificates.

S7-300 Automation System Module data

Manual, 08/2006, A5E00105505-04

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: