f5a1677fef3dac30ea840eb2e7bcbea7.PDF

FANUC Series 0*-MODEL C

FANUC Series 0* Mate-MODEL C

PARAMETER MANUAL

B-64120EN/01

B-64120EN/01

DEFINITION OF WARNING, CAUTION, AND NOTE

This manual includes safety precautions for protecting the user and

preventing damage to the machine. Precautions are classified into

Warning and Caution according to their bearing on safety. Also,

supplementary information is described as a Note. Read the Warning,

Caution, and Note thoroughly before attempting to use the machine.

WARNING

Applied when there is a danger of the user being

injured or when there is a damage of both the user

being injured and the equipment being damaged if

the approved procedure is not observed.

CAUTION

Applied when there is a danger of the equipment

being damaged, if the approved procedure is not

observed.

NOTE

The Note is used to indicate supplementary

information other than Warning and Caution.

- Read this manual carefully, and store it in a safe place.

s-1

B-64120EN/01

PREFACE

The models covered by this manual, and their abbreviations are :

Model name

Abbreviation

FANUC Series 0 i -TC

0 i -TC

Series 0 i -C

0 i

FANUC Series 0 i -MC

0 i -MC

FANUC Series 0 i Mate -TC 0 i Mate -TC

FANUC Series 0 i Mate -MC 0 i Mate -MC

Series 0 i Mate -C 0 i Mate

NOTE

1 For ease of explanation, the models may be

classified as follows:

T series: 0 i -TC/0 i Mate -TC

M series: 0 i -MC/0 i Mate -MC

2 Some functions described in this manual may not

be applied to some products.

For details, refer to the DESCRIPTIONS

(B-64112EN).

3 The0 i /0 i Mate requires setting of parameters to

enable part of basic functions. For the parameters

to be set, see Section 4.46, "PARAMETERS OF

FS0i BASIC FUNCTIONS".

p-1

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: