Cabinet - Corner Cupboard.pdf - Projekty - stolarstwo - michalxmen

122

CORNER CUPBOARD

540

541

Materials List

Key

No.

Size and description (use)

3/4 x 3 1/2 x 41 3/4" pine (plinth frame)

3/4 X 3 1/2 X 29 1/2" pine (plinth frame)

3/4 X 4 1/4 X 30 1/4" pine (plinth back)

3/4 X 4 1/4 X 29 1/2" pine (plinth back)

3/4 X 4 1/4 X 6 5/16" pine (plinth front)

3/4 X 4 1/4 X 36" pine (plinth front)

3/4 X 3 1/2 X 26" pine (back frame)

3/4 X 3 1/2 X 29 1/2" pine (back frame)

3/4 X 3 1/2 X 28 3/4" pine (back frame)

3/4 X 3 1/2 X 50" pine (back frame)

1/4 X 24 1/2 X 28 3/4" plywood (back panel)

1/4 X 24 1/2 X 28 1/2" plywood (back panel)

3/4 X 3 1/2 X 40 5/8" pine (frame)

3/4 X 3 1/2 X 28 3/4" pine (frame)

3/4 X 5 1/2 X 50" pine (back panel)*

3/4 X 2 3/4 X 30 9/16" pine (rail)

542

3/4 X 2 3/8 X 30 9/16" pine (rail)

3/4 X 2 1/4 X 30 9/16" pine (rail)

3/4 X 2 1/4 X 30" pine (doorstop)

3/4 X 1 X 30" pine (doorstop)

3/4 X 13/4 X 30" pine (doorstop)

3/4 X 26 5/8 X 26 5/8" plywood (shelf)

3/4 X 28 X 28" plywood (top)

3/4 X 28 X 28" plywood (shelf)

3/4 X 313/4 X 313/4" plywood (counter)

3/4 X 28 1/2 X 28 1/2" plywood (bottom)

1/4 X 3/4" X 12' pine (edge band)**

3/4 X 3/4 X 5" pine (spacer)***

3/4 X 6 X 26" pine (side)

3/4 X 6 X 50" pine (side)

3/4 X 4 5/8 X 26" pine (stile)

3/4 X 4 5/8 X 50" pine (stile)

3/4 X 1 X 26" pine (cleat)

3/4 X 1 X 50" pine (cleat)

3/4" X 5' pine quarter round (trim)**

5/8 X 3/4" X 10' pine cove (trim)**

5/8 X 3/4" X 5' pine cove & nose(trim)**

3/4 X 1 3/4" X 5' pine (cleat)**

31/2" X 5' pine crown (trim)

3/4 X 1 7/8 X 12 7/8" pine (top door rail)

3/4 X 1 7/8 X 13 1/8" pine (top door rail)

3/4 X 1 7/8 X 35" pine (top door stile)

3/4 X 1 7/8 X 20 3/4" pine (lower door stile)

3/4 X 2 1/4 X 12 7/8" pine (lower door rail)

3/4 X 2 1/4 X 13 1/8" pine (lower door rail)

3/4 X 2 1/8 X 35" pine (top door stile)

3/4 X 2 1/8 X 20 3/4" pine (lower door stile)

1/4 X 3/4" X 22' pine lattice (beading)**

1/4 X 9 1/4 X 17" plywood (door panel)

1/10 X 9 5/8 X 31 3/4" glass (door glass)

15' glass retainer, No. 27078**†

AA 2

3/4 X 1 X 1 3/8" pine (latch block)

magnetic latch

pair H hinges, No. 76067

543

DD 4 knob, No. 76117

EE As reqd. 1 1/4" drywall screw

FF As reqd. 1 1/2" drywall screw

GG As reqd. 2" drywall screw

HH As reqd. 2 1/2" drywall screw

II As reqd. No. 20 joining plate

JJ As reqd. No. 0 joining plate

KK As reqd. 1 1/4" finishing nail

LL As reqd. 3/4" finishing nail

Misc: Glue, paint, and 1/8"-radius half-round router bit (part

#TF82102) available at Trendlines, 135 American Legion

Highway, Revere, MA 02151; call 800/767-9999 to order).

* 1x6" beaded tongue-and-groove

** Overall quantity indicated, cut to length as required.

*** Cut to fit

†(available at The Woodworkers' Store, 4365 Willow Drive,

Medina MN 55340; call 800/610-0883 to order)

Case Construction

Begin by cutting 1 x 4 stock to length for all of

the 31/2-in. frame members. Rip 1 x 6 stock to

41/4 in. for the wider plinth frame pieces. Mark

all of the square half lap joints for the vertical

and horizontal frames, and code the pieces

with letters so you won't get them mixed up.

Build a router lapping jig by securing two 16-

in.-long 1 x 6 boards to a worksurface so

they're 31/2 in. apart. At one end of the space

between the 1 x 6s, secure a 6-in.-long 1 x 4

stopblock between the boards. Then place the

first workpiece between the 1 x 6s and against

the stopblock. Measure the distance from the

edge of your router's baseplate to the cutting

edge of a 3/4-in. straight bit, and use this

dimension to locate the four guide strips that

will limit the router's path to the size of the half

lap joint.

544

Cabinet - Corner Cupboard.pdf

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: