yzf-r1_acce_asse_002.pdf

Notes on assembly

Paper Craft parts are easier to work with when printed out on strong,thick paper (like postcard stock).

*In creating these Paper Craft models we use 135kg Kent paper stock (0.18mm).

TO BEGIN

Basic working method and markings

Tools and materials needed

-Ruler -scissors - blade cutter or "Exacto-knife" - awl or

other pointed tool (for making a folding crease) - felt pen

- pin set - glue - hand towel ( for cleaning your fingers) -

dictionary or other heavy book ( to press the papers flat).

Solid lines

Fold along these lines. The printed

surface should be on the outside of

the folded shape.

Items of Caution

*Take care when using sharp or pointed objects or when

using bladed cutting tools. Place a heavy sheet of paper

under the paper you want to cut.

*Use glue and other adhesives only in well-ventilated

areas.

*When printing, use a slightly reduced font size. There

may be differences in dimensions, depending on the type

of printer used.

Broken lines

Fold along these lines. The printed

surface should be on the inside of

the folded shape.

Dotted line

HOW TO ASSEMBLE

Cut along these lines.

*Follow the working method and markings carefully.

*Cut carefully along the outter line with cutting blade,

Exacto-knife or scissors.

One - point Advice

Do not fold or cut the parts

marked .

*Cut carefully with cutting blade, Exacto-knife or

scissors.

*For folding parts, first use an awl or other pointed

tool to make a light crease along the dotted or solid

line. This will make the folds straight. Avoid making

strong creases, as this will cause the paper to tear.

Cut out parts marked with an as-

terisk(*).

*As an adhesive, white wood glue is recommended.

Avoid over application as this will cause the paper

to wrinkle.

Red dots are the reference positions

for gluing surfaces.

*Before beginning assembly, test adhesive amounts

on extra paper.

*Occasionally, white spots will be apparent on folds

and cuts. Use a marker or pencil to fill in these spots.

It is recommended that this be done after each stage

of assembly because coloring becomes more diffi-

cult once parts are assembled.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: