Praying Mantis -- 7 pages, English.pdf

(112 KB) Pobierz
6150990 UNPDF
Praying Mantis by Robert J. Lang
Copyright
1990. All rights reserved.
1 . Crease the diagonals.
2 . Fold and unfold.
3 . First make the horizontal
crease halfway between the two
pinch marks. Then make the
vertical crease through the
intersection of the horizontal
crease and the diagonal of the
square.
4 . Fold the corners in and turn
the paper over.
5 . Fold a Waterbomb Base
based on the new creases.
6 . Swivel-fold.
7 . Fold and unfold.
8 . Open-sink the corner..
ã
6150990.033.png 6150990.034.png
9 . Open out the sink and push some paper up
from the inside; pinch the excess paper in half
and swing it over to the left.
10 . Reverse-fold
the corner.
11 . Pull down the edge of the
pocket and fold the right layer
back to the left.
12 . Fold one flap down.
13 . Swing one layer from right to left.
14 . Repeat steps 6–13 on the right.
15 . Squash-fold.
16 . Petal-fold.
17 . Unwrap a single layer.
18 . Squash-fold.
19 . Reverse-fold the edges.
20 . Turn the model over.
21 . Repeat steps 15–17.
6150990.035.png 6150990.036.png 6150990.001.png 6150990.002.png 6150990.003.png 6150990.004.png
22 . Fold and
unfold.
23 . Fold the flap down, using the
newly-made creases as a guide.
24 . Reverse-fold a single
layer out from the inside.
25 . Reverse-fold
the edges.
26 . Reverse-
fold the
bottom
corner.
27 . Pull out the layers
trapped under the
triangular hood. The
model will not lie flat.
28 . Open-sink
the shaded
region and
refold.
29 . Flatten
the sunk
region.
30 . Fold and
unfold.
31 . Fold one
layer to the left
in front and
one to the right
behind.
32 . Top of the model.
Fold and unfold.
33 . Pleat and fold a rabbit
ear from the thick point
using the existing creases.
34 . Fold and unfold
through all layers.
35 . Wrap one layer of
paper to the front.
36 . Fold one layer to
the right, releasing
the trapped paper at
the left that links it to
the next layer.
37 . In progress.
Pull paper out
from here.
38 . Close the
model back up.
39 . Repeat steps
36–38 on the next
two layers.
40 . Swing the point
over to the left.
6150990.005.png 6150990.006.png 6150990.007.png 6150990.008.png 6150990.009.png 6150990.010.png 6150990.011.png 6150990.012.png 6150990.013.png
41 . Repeat steps
36–39 on the right.
42 . There are four edges on
the top right; pull out as much
of the loose paper between the
third and fourth edges as
possible. A hidden pleat
disappears in the process.
43 . Pull out the
loose paper
between the first
and second
layer.
44 . Swing the point
back to the right.
45 . Repeat steps
42–43 on the left.
46 . Fold and unfold.
47 . Open-sink the
point. You will have
to open out the top of
the model somewhat
to accomplish this.
48 . Rearrange the
layers at the top so that
the central square forms
a Preliminary Fold.
49 . Fold one layer to the
right in front, and one to
the left behind. The
model should be
symmetric as in step 31.
50 . Petal-fold.
51 . Fold the flap
back upward.
52 . Closed-sink the
point. (Be careful!
It is very easy to
rip the paper.)
53 . Repeat
steps 50–52
behind.
54 . Reverse-fold the
long edge all the way
through the model
(closed-sink the
corner at the top).
55 . Fold two layers to
the right (in the
process, you undo the
reverse fold you made
back in step 11).
56 . Crease
into thirds.
57 . Sink (open at the
bottom, closed at the
top) the edge in and
out on the existing
creases.
6150990.014.png 6150990.015.png 6150990.016.png 6150990.017.png 6150990.018.png 6150990.019.png
58 . Sink the
corner at the
top.
59 . Fold one
layer back to
the left.
60 . Fold
one layer in
thirds.
61 . Crimp the top left
corner. Fold one layer
from the right to overlap
the left layer, flattening
the point behind.
62 . Mountain-
fold the edge
underneath.
63 . Fold one
layer from
right to left.
64 . Repeat
steps 55–62
on the right.
65 . Turn
the model
over.
66 . Fold one
flap up.
67 . Fold and
unfold; the crease
lies on top of the
horizontal edge of
the layers behind.
68 . Pleat
above the
crease you
just made.
69 . Crease
into thirds.
70 . Fold the flap
over on one of the
creases you just
made, and make a
linked pair of swivel
folds at the top.
71 . Fold the
next layer over
the top of the
one you just
folded.
72 . Mountain-
fold both layers
together.
73 . Repeat
steps 69–72
on the right.
74 . Fold the
top point
down to the
right.
6150990.020.png 6150990.021.png 6150990.022.png 6150990.023.png 6150990.024.png 6150990.025.png 6150990.026.png 6150990.027.png 6150990.028.png 6150990.029.png 6150990.030.png 6150990.031.png 6150990.032.png
Zgłoś jeśli naruszono regulamin