T-38-Instructions.pdf

T-38 assembly manual

1: These are all the tools

and materials I have used.

2: Tip: Because the parts

are so small, it is better to

put a drop of glue on a

piece of paper and then

apply to your model with a

(wooden) toothpick.

3: I have used a pointed

pair of tweezers to shape

the nosecone. (part nr. 1)

4: YEP! I did cut out all

the small tabs!! :) (part nr.

5: This is part nr.3. It is

round at the front and at

the rear the top is flattened.

This is were the canopy

will be.

6: These two parts (part nr.

5a & 5b) must be glued on

top of each other and will

be used as reinforcement.

(bulkhead) Same goes for

parts 7a/b and 12a/b.

7: Here you see part 5a/b

glued inside the back of

part nr.4.

8: This is part nr.6 with nr

7a/b inside. Notice the

shape of this part. It is half

rounded at the front and

square at the rear.

9: These are parts 1 to 8

assembled.

10: Same as previous, but

from a different angle

11: Make sure you got the

seam in a straight line!

12: Part nr.9. Top of the aft

fuselage. NOTE! do NOT

fold the tabs along the side

of this part, just round

them off and make small

cuts at the markings

between them.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: