antenna cord.pdf

(56 KB) Pobierz
Document:
67–9
AUDIO & VISUAL SYSTEM
–
ANTENNA CORD SUB–ASSY
ANTENNA CORD SUB–ASSY
REPLACEMENT
HINT:
COMPONENTS: See page 67–1
1.
670E3–01
REMOVE INSTRUMENT PANEL SUB–ASSY UPPER(See page 71–10 )
HINT:
Refer to the procedure until the step, ”REMOVE INSTRUMENT PANEL SUB–ASSY UPPER” of
INSTRUMENT PANEL SUB–ASSY LOWER.
Remove the related parts as long as the antenna cord sub–assy can be removed.
2.
REMOVE VISOR HOLDER(See page 76–21 )
HINT:
Refer to the procedure until the step, ”REMOVE VISOR HOLDER” of ROOF HEADLINING ASSY.
Remove the parts related to the roof headlining assy in the range that antenna cord can be cut off.
3.
REMOVE SUN ROOF OPENING TRIM MOULDING (W/ SLIDING ROOF)
4. DISCONNECT ANTENNA CORD SUB–ASSY
(a) REAR SIDE:
Disconnect the connector and antenna cord plug.
(b) REAR SIDE:
Remove the 2 clamps.
2 Clamps
I32297
2004 COROLLA (RM1037U)
Author:
Date:
1721
264951261.001.png
67–10
AUDIO & VISUAL SYSTEM
–
ANTENNA CORD SUB–ASSY
(c) FRONT SIDE:
Remove the 9 clamps.
9 Clamps
I32300
5. REMOVE ROOF HEADLINING ASSY(See page 76–21 )
NOTICE:
Do not bend the roof headlining assy.
6. REMOVE ANTENNA CORD SUB–ASSY
(a) Remove the antenna cord sub–assy from the roof headlining.
2004 COROLLA (RM1037U)
Author:
Date:
1722
264951261.002.png
67–11
AUDIO & VISUAL SYSTEM
–
ANTENNA CORD SUB–ASSY
7. INSTALL ANTENNA CORD SUB–ASSY
(a) Tape the antenna cord sub–assy at the position of the roof headlining shown in the illustration.
NOTICE:
Try not to touch the adhesive side of the tape when taping.
w/ Sliding Roof:
w/o Sliding Roof:
: Tape Position
I32299
(b) Install the roof headlining assy (See page 76–21 ).
(c) Engage the 9 clamps at the front side of antenna cord.
(d) Connect the plug and connector at the rear side of antenna cord.
8. INSTALL REAR SEAT BACK ASSY (FIXED TYPE REAR SEAT)(See page 72–8 )
9. INSTALL REAR SEAT BACK ASSY (SEPARATED TYPE REAR SEAT)(See page 72–6 )
10. INSTALL BENCH TYPE REAR SEAT CUSHION ASSY(See page 72–6 or 72–8 )
11. INSTALL INSTRUMENT PANEL SUB–ASSY UPPER(See page 71–10 )
HINT:
Refer to the procedure until the step, ”INSTALL INSTRUMENT PANEL SUB–ASSY UPPER” of INSTRU-
MENT PANEL SUB–ASSY LOWER.
2004 COROLLA (RM1037U)
Author:
Date:
1723
The antenna cord sub–assy should come to the center of the tape (100 mm(3.94 in.) x 25
mm(0.98 in.)) when taped.
264951261.003.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin