panasonic KX-TEA308 Manual.pdf

Advanced Hybrid System

Installation Manual

Model No. KX-TEA308

Thank you for purchasing a Panasonic Advanced Hybrid System.

Please read this manual carefully before using this product and save this manual for future use.

System Components

System Components Table

Model

Description

Main Unit

KX-TEA308

Advanced Hybrid System: 3 Outside (CO) Lines, 8 Hybrid

Extensions

Optional Service Cards

KX-TE82460

2-Port Doorphone Card

KX-TE82492

2-Channel Voice Message Card

KX-TE82493

3-Port Caller ID Card

Proprietary Equipment

KX-T30865

Doorphone

KX-A227

Backup Battery Cable

Abbreviations in this manual

Proprietary Telephone: PT

Single Line Telephone: SLT

Direct Station Selection: DSS

Compatible Proprietary Telephones

•

KX-T7700, KX-T7300, and KX-T7000 series PTs

•

KX-T7710 SLT

•

KX-T7740, KX-T7340, and KX-T7040 DSS Consoles

For the equipment that can be connected to the PBX, refer to "1.2.2 System Connection Diagram".

Notice

Certain models may not be available in your country/area.

Certain PTs and features may not be available in your country/area. Consult your certified

Panasonic dealer for more information.

Installation Manual

Important Safety Instructions

When using your telephone equipment, basic safety precautions should always be followed to reduce

the risk of fire, electric shock and injury to persons, including the following:

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on the product.

3. Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol

cleaners. Clean with a damp cloth.

4. Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming pool.

5. Do not place the product on an unstable surface, as a fall may cause serious internal damage.

6. Slots and openings in the front, back and bottom of the cabinet are provided for ventilation; to

protect it from overheating, these openings must not be blocked or covered. The openings should

never be blocked by placing the product on a bed, sofa, rug, or other similar surface while in use.

The product should never be placed near or over a radiator or other heat source. This product

should not be placed in a sealed environment unless proper ventilation is provided.

7. The product should only be connected to the type of electrical power supply specified on the

product label. If you are not sure of the type of power supply to your home, consult your dealer

or local power company.

8. For safety purposes this unit is equipped with an earthed plug. If you do not have an earthed

outlet, please have one installed. Do not bypass this safety feature by tampering with the plug.

9. Do not allow anything to rest on the power cord. Do not locate this product where the power cord

may be stepped on or tripped on.

10. To reduce the risk of fire or electric shock, do not overload wall outlets and extension cords.

11. Do not insert objects of any kind into this product through its slots and openings, as they may

touch dangerous voltage points or short out parts that could result in a risk of fire or electric

shock. Never spill liquid of any kind on or in the product.

12. To reduce the risk of electric shock, do not disassemble this product. Only qualified personnel

should service this product. Opening or removing covers may expose you to dangerous voltages

or other risks. Incorrect reassembly can cause electric shock.

13. Unplug this product from the wall outlet and have it serviced by qualified service personnel in the

following cases:

a) When the power supply cord or plug is damaged or frayed.

b) If liquid has been spilled into the product.

c) If the product has been exposed to rain or water.

d) If the product does not operate according to the operating instructions. Adjust only the

controls that are explained in the operating instructions. Improper adjustment of other

controls may result in damage and may require service by a qualified technician to restore

the product to normal operation.

e) If the product has been dropped or the cabinet has been damaged.

f) If product performance deteriorates.

14. Avoid using wired telephones during an electrical storm. There is a remote risk of electric shock

from lightning.

15. Do not use a telephone in the vicinity of a gas leak to report the leak.

SAVE THESE INSTRUCTIONS

Installation Manual

Precautions

•

Keep the unit away from heating appliances and devices that generate electrical noise such as

fluorescent lamps, motors and televisions. These noise sources can interfere with the

performance of the PBX.

˚C

•

This unit should be kept free of dust, moisture, high temperature (more than 40

) and

vibration, and should not be exposed to direct sunlight.

•

If you are having problems making calls to outside destinations, follow this procedure to test the

outside (CO) lines:

1. Disconnect the PBX from all outside (CO) lines.

2. Connect known working single line telephones (SLTs) to those outside (CO) lines.

3. Make a call to an external destination using those SLTs.

If a call cannot be carried out correctly, there may be a problem with the outside (CO) line that

the SLT is connected to. Contact your telephone company.

If all SLTs operate properly, there may be a problem with your PBX. Do not reconnect the PBX

to the outside (CO) lines until it has been serviced by an authorised Panasonic Factory Service

Centre.

•

Wipe the unit with a soft cloth. Do not clean the unit with abrasive powders or with chemical

agents such as benzene or thinner.

For users in New Zealand only

•

This equipment shall not be set to make automatic calls to the Telecom '111' Emergency Service.

•

The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has

accepted that the item complies with minimum conditions for connection to its network. It

indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty.

Above all, it provides no assurance that any item will work correctly in all respects with another

item of Telepermitted equipment of a different make or model, nor does it imply that any product

is compatible with all of Telecom's network services.

•

This equipment is not capable, under all operating conditions, of correct operation at the higher

speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in

such circumstances.

•

Some parameters required for compliance with Telecom's Telepermit requirements are

dependent on the equipment (PBX) associated with this modem. In order to operate within the

limits for compliance with Telecom's Specifications, the associated PBX equipment shall be set

to ensure that modem calls are answered between 3 and 30 seconds of receipt of ringing.

•

IMPORTANT NOTICE

Under power failure conditions, the connected telephones may not operate. Please ensure that

a separate telephone, not dependent on local power, is available for emergency use.

For users in Taiwan only

•

Lithium batteries can be found in the circuit boards of the main board and optional cards of the

PBX.

Notes

•

When disposing of any of the above products, all batteries must be removed. Follow the

applicable laws, regulations, and guidelines in your country/area regarding disposal of

batteries.

•

When replacing a battery, use only the same battery type, or an equivalent recommended

by the battery manufacturer.

Installation Manual

Notice

Regarding removing or replacing a battery in the circuit board, consult your dealer.

For users in Finland, Norway and Sweden only

•

This unit may only be installed in a room or space with restricted access, and equipotential

bonding must be applied. For information on earthing, refer to "2.2.5 Connecting Frame Earth".

WARNING

•

THIS UNIT MAY ONLY BE INSTALLED AND SERVICED BY QUALIFIED

SERVICE PERSONNEL.

•

IF DAMAGE TO THE UNIT EXPOSES ANY INTERNAL PARTS, DISCONNECT

THE POWER SUPPLY CORD IMMEDIATELY AND RETURN THE UNIT TO YOUR

DEALER.

•

UNPLUG THIS UNIT FROM THE AC OUTLET IF IT EMITS SMOKE, AN

ABNORMAL SMELL OR MAKES UNUSUAL NOISE. THESE CONDITIONS CAN

CAUSE FIRE OR ELECTRIC SHOCK. CONFIRM THAT SMOKE HAS STOPPED

AND CONTACT AN AUTHORISED PANASONIC FACTORY SERVICE CENTRE.

•

WHEN RELOCATING THE EQUIPMENT, FIRST DISCONNECT THE TELECOM

CONNECTION BEFORE DISCONNECTING THE POWER CONNECTION. WHEN

THE UNIT IS INSTALLED IN THE NEW LOCATION, RECONNECT THE POWER

FIRST, AND THEN RECONNECT THE TELECOM CONNECTION.

•

TO PREVENT POSSIBLE FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

•

THE POWER SUPPLY CORD IS USED AS THE MAIN DISCONNECT DEVICE.

ENSURE THAT THE AC OUTLET IS LOCATED NEAR THE EQUIPMENT AND IS

EASILY ACCESSIBLE.

CAUTION

DANGER OF EXPLOSION EXISTS IF A BATTERY IS INCORRECTLY REPLACED. REPLACE

ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE BATTERY

MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING TO THE

MANUFACTURER'S INSTRUCTIONS.

For Future Reference

Please print, record, and retain the following information for future reference.

Note

The serial number of this product can be found on the label affixed to the unit. You should record

the model number and the serial number of this unit as a permanent record of your purchase to

aid in identification in the event of theft.

Installation Manual

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: