sts6payloadassembly.pdf

(224 KB) Pobierz
© 2007
Assembly Instructions for STS-6 payload
793832436.026.png 793832436.027.png
 
The aft payload frame is displayed in
this photo with the circular sections cut
open.
The forward payload frame needs to be
folded to make the shape as the photo.
All boxes are glued to areas
indicated.
793832436.028.png 793832436.001.png 793832436.002.png 793832436.003.png 793832436.004.png 793832436.005.png 793832436.006.png 793832436.007.png
Building the IUS (inertial upper
stage) is very straightforward.
Follow the sequence and glue the
correspondent parts as photo shows.
Hexagonal box: The cover with
numbers 1 and 2 is glued on top of
the hexagonal box with number 1
pointing to the seam of the box.
793832436.008.png 793832436.009.png 793832436.010.png 793832436.011.png
Cones 1 and 2 are glued on top of
box with correspondent numbers.
Part 3 is glued to the side as shown.
The TDRS satellite (Tracking and
Data Relay Satellite) is complete.
The TDRS stack is glued on top of the IUS with
the flat white/black panel to the right and the
circular antennae to the left as photo shows.
793832436.012.png 793832436.013.png 793832436.014.png 793832436.015.png 793832436.016.png 793832436.017.png 793832436.018.png 793832436.019.png
The photos below show the sequence to
build the solar panels of the TDRS.
793832436.020.png 793832436.021.png 793832436.022.png 793832436.023.png 793832436.024.png 793832436.025.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin