PROFINET_Sys_e.pdf

Preface

SIMATIC PROFINET System Description

Guide to the PROFINET

Documentation

______________

PROFINET overview

SIMATIC

______________

Setting Up PROFINET

PROFINET

System Description

PROFINET Data Exchange

and Communication

______________

PROFINET IO System

Engineering

______________

System Manual

PROFINET CBA -

Engineering

______________

PROFINET - Application

Examples

______________

This manual is part of the documentation package

with order numbers: 6ES7398-8FA10-8BA0

10/2006

A5E00298288-03

Safety Guidelines

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

Danger

indicates that death or severe personal injury will result if proper precautions are not taken.

Warning

indicates that death or severe personal injury may result if proper precautions are not taken.

Caution

with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.

Caution

without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.

Notice

indicates that an unintended result or situation can occur if the corresponding information is not taken into

account.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The device/system may only be set up and used in conjunction with this documentation. Commissioning and

operation of a device/system may only be performed by qualified personnel. Within the context of the safety notes

in this documentation qualified persons are defined as persons who are authorized to commission, ground and

label devices, systems and circuits in accordance with established safety practices and standards.

Prescribed Usage

Note the following:

Warning

This device may only be used for the applications described in the catalog or the technical description and only in

connection with devices or components from other manufacturers which have been approved or recommended by

Siemens. Correct, reliable operation of the product requires proper transport, storage, positioning and assembly

as well as careful operation and maintenance.

Trademarks

All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks in this

publication may be trademarks whose use by third parties for their own purposes could violate the rights of the

owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Siemens AG

Automation and Drives

Postfach 48 48

90437 NÜRNBERG

GERMANY

Order No.: A5E00298288-03

Ⓟ 11/2006

Technical data subject to change

Preface

Purpose of the manual

This manual will support you in the installation, commissioning and the ongoing operation of

a PROFINET system.

It also explains, with reference to examples, how to program diagnostics for IO devices.

It is aimed at programmers of application programs and at people who work in the areas of

configuring, commissioning and servicing automation systems.

Basic knowledge required

The following knowledge is required in order to understand the manual:

• General knowledge of automation technology

• You will also need to know how to use computers or PC-like equipment (such as

programming devices) under the Windows operating system.

• Knowledge of STEP 7. This is provided in the Programming with STEP 7 V5.4 manual.

• Very good knowledge of the communication procedures PROFINET IO and

PROFIBUS DP.

• Good knowledge of the SIMATIC distributed IOs

Scope

This documentation is the basic documentation for all products from the PROFINET

environment. The documentation of the individual PROFINET products is based on this

documentation.

Where this documentation fits in

In addition to this manual you require the following manuals depending on the application

case.

• The PROFINET IO Getting Started Co lection manual

• The Programming with STEP 7 V5.4 SP1 manual

• The From PROFIBUS DP to PROFINET IO manual

• The Profinet IO Diagnostics by the User Program application description

System Description

System Manual, 10/2006, A5E00298288-03

iii

Preface

Guide

The manual is structured into the following subject areas:

• Overview of PROFINET

• Structure and network components of PROFINET

• Transmission methods in PROFINET IO

• Engineering and Diagnostics in PROFINET IO

• Engineering and Diagnostics in PROFINET CBA

Important terms are explained in the glossary. The index helps you to quickly find all text

passages relevant to your keyword.

Recycling and Disposal

On account of their low-emission equipment, the devices described in this document are

recyclable. For an environmentally friendly recycling and disposal of your

old equipment please refer to a certified disposal company for electrical scrap.

Changes compared to the previous version

Changes compared to the previous version are the description of new technologies and

upgraded functions for the SIMATIC device family.

Audience

This manual is intended for the following target groups who plan and design networked

automation solutions with SIMATIC products:

• Decision makers

• Planners

• Designers

Commissioning engineers and service personnel will also benefit from this manual.

Further support

If you have questions about the products described here and do not find the answers in this

manual, please refer to the contact at your local Siemens office.

• You will find your contact at:

http://www.siemens.com/automation/partner

• For the guide to the available technical documentation for the individual SIMATIC

products and systems, refer to:

http://www.siemens.de/simatic-doku

• You will find the online catalog and the online ordering system at:

http://mall.automation.siemens.com/

System Description

System Manual, 10/2006, A5E00298288-03

Preface

Training Centers

We offer various courses for newcomers to the SIMATIC S7 automation system. Please

contact your regional Training Center, or the central Training Center in D90327 Nuremberg.

• Phone: +49 (911) 895-3200

• Internet: http://www.sitrain.com

Technical Support

You can contact the Technical Support for all the A&D products by means of the Web form

for the support request:

• Internet: http://www.siemens.de/automation/support-request

• Phone: + 49 180 5050 222

• Fax: + 49 180 5050 223

Further information on our Technical Support can be found on the Internet under

http://www.siemens.de/automation/service

Service & Support on the Internet

In addition to access to our range of documentation, you also have access to our know-how

on the Internet.

http://www.siemens.com/automation/service&support

where you will find the following:

• Our newsletter containing up-to-date information on your products.

• Relevant documentation via the search function in Service & Support.

• A forum where users and specialists from around the world exchange information.

• Your local contact for Automation & Drives.

• Information about local service, repairs and spare parts. You will find much more under

"Services".

System Description

System Manual, 10/2006, A5E00298288-03

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: