LAYPS04GBB.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE LANCIA

YPSILON

YEAR 04 ﬁ

PETROL

DIESEL

MOD.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens in the engine compartment on the support of the

shock absorber, passenger’s side.

Pass the cables using the original big fairlead located above the servobrake.

CENTRAL UNIT POSITION

Position the modular sistems and the modules under the dashboard, on the left of the steering

wheel.

POWER SUPPLY

+30: connect to the RED wire in the 2 way connector, in the fuse box.

-31: connect directly to the ground terminal located behind the driver’s side bulkhead.

IGNITION WIRE

Connect to the ORANGE wire located in the wiring harness coming out of the connector of the

ignition key.

DIRECTION INDICATORS

Connect to the wires: PINK/YELLOW (ant. left.) at the position nr.38, PINK (ant. right) at the

position nr. 39 in the 40 way blue connector; PINK/WHITE (lat. left) at the position nr. 2, PINK

(lat. right) at the position nr.13, BROWN/VIOLET (post. right) at the position nr. 3 and

PINK/BLACK (post. left) at the position nr. 12 in the 40 way black connector in the front part of

the fuse box located on the left of the steering wheel, under the dashboard.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side:

cut the GREY/BLUE wire in the 12 way white connector, on the push-button panel, in the

driver’s side door.

Front window, passenger’s side:

cut the VIOLET/WHITE wire in the wiring harness coming out of the driver’s side door.

CENTRAL DOORS LOCKING Negative control signal

Connect to the wires: LIGHT BLUE/BLUE (lock) and to the GREY/WHITE (unlock) in the

wiring harness coming out of the 18 way grey connector on the central inside the driver’s side

door. As alternative connect to the wires: LIGHT BLUE/BLUE (lock) and GREY/BLACK

(unlock) in the wiring harness coming out of the connector of the OPEN/CLOSE original push-

button.

IMMOBILISATION POINT

Fuel pump

Cut the VIOLET/YELLOW wire at the position nr.32, in the 32 way black connector, in the front

part of the fuse box placed on the left of the steering wheel under the dashboard.

STARTER

+50: Cut the BROWN wire located in the wiring harness coming out of the connector of the

ignition key.

BONNET SWITCH

Install an additional switch on the headlamp support plate.

DOORS SWITCH

Connect to the: LIGHT BLUE/WHITE wire (anterior left), at the position nr. 8 and LIGHT

BLUE/GREEN wire (anterior right), at the position nr.25, in the 40 way black connector, in the

front part of the fuse box placed on the left of the steering wheel, under the dashboard.

BOOT SWITCH

Connect to the BLACK/GREY wire at the position nr. 36, in the 40 way black connector, in the

front part of the fuse box placed on the left of the steering wheel, under the dashboard.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

layps04gbb.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: