S1 2.pdf

(5745 KB) Pobierz
S1FRU.cdr
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
S1 Series
GENERAL INFORMATION
Tools Required for Proper
Disassembly and Reassembly:
1. Phillips Screwdriver (Size 0&1)
2. Flat head Screwdriver
3. Case Separator
4. ESD Wrist Strap
5. ESD mats
6. Tweezers
Before attempting any of the following procedures,
make sure that the main battery and AC adaptor is
not connected to the unit and the environment in
which you are working on is protected from
Electro-Static Discharge(ESD).
TOSHIBA
Tough Enough for Today’s World.
TM
49472355.051.png 49472355.062.png 49472355.073.png 49472355.084.png 49472355.001.png 49472355.002.png 49472355.003.png 49472355.004.png 49472355.005.png 49472355.006.png 49472355.007.png 49472355.008.png 49472355.009.png 49472355.010.png 49472355.011.png 49472355.012.png 49472355.013.png 49472355.014.png 49472355.015.png 49472355.016.png 49472355.017.png 49472355.018.png 49472355.019.png 49472355.020.png 49472355.021.png 49472355.022.png 49472355.023.png 49472355.024.png 49472355.025.png 49472355.026.png 49472355.027.png 49472355.028.png 49472355.029.png 49472355.030.png 49472355.031.png 49472355.032.png 49472355.033.png 49472355.034.png 49472355.035.png 49472355.036.png 49472355.037.png 49472355.038.png 49472355.039.png 49472355.040.png 49472355.041.png 49472355.042.png 49472355.043.png 49472355.044.png 49472355.045.png 49472355.046.png 49472355.047.png 49472355.048.png 49472355.049.png 49472355.050.png 49472355.052.png 49472355.053.png 49472355.054.png 49472355.055.png 49472355.056.png 49472355.057.png 49472355.058.png 49472355.059.png 49472355.060.png 49472355.061.png 49472355.063.png 49472355.064.png 49472355.065.png 49472355.066.png 49472355.067.png 49472355.068.png 49472355.069.png 49472355.070.png 49472355.071.png 49472355.072.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
S1 Series
TOSHIBA
Tough Enough for Today’s World.
TM
49472355.074.png 49472355.075.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
TM
S1 Series
BATTERY PACK REMOVAL
OPTIONAL PC CARD REMOVAL
Release
lever
Battery
Pack
PC card
Eject button
1. Turn the computer upside down as shown.
2. Slide the battery release lever in the direction of the
arrow.
3. Lift out the battery .
1. Press the eject button for the PC card you want to
remove.
2. Press the extended eject button to pop the PC Card
out.
3. Grasp the PC card and remove it.
Note: The battery release lever will only unlatch if the unit
is upside down.
NOTE : Before removing any PC Card device, make sure
it is “STOPPED” in the PC Card manager.
SELECT BAY REMOVAL
CD-R/W/DVD-ROM DRIVE DISASSEMBLY
Release lever
CD-R/W/DVD-ROM
drive
Base cover
Connector
M2x3 silver
flat head
screws
Connector cover
Select bay
device
M2x8 silver
screws
1. Turn the computer upside down.
2. Slide the release lever in the direction of the arrow.
3. Pull out the select bay device in the direction of the
arrow.
1. Remove five M2x3 silver flat head screws securing
the base cover and lift out the cover .
2. Remove two M2x8 silver screws securing the
connector cover.
3. Remove the connector cover and the connector
from the CD-R/W/DVD-ROM drive.
NOTE: If the lock screw is in locked position, remove it
and attach it to the other hole for temporary retention
of the screw.
TOSHIBA
Tough Enough for Today’s World.
49472355.076.png 49472355.077.png 49472355.078.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
TM
S1 Series
MEMORY MODULE REMOVAL
M2.5x2.8
silver flat
head screws
Memory cover
Memory clips
1. Turn the computer upside down.
2. Remove one M2.5x4 black screw securing the memory
cover and remove the memory cover .
3. Spread the memory clips outward and pull the
memory module out of the connector on a
30 degree angle.
HDD REMOVAL
HDD
bracket
HDD
M2.5x4 black flat
head screw
HDD assy
HDD connector
M3x4 flat head brass screws
1. Turn the computer upside down.
2. Remove one M2.5x4 black flat head screw securing
HDD assembly.
3. Slide the HDD assembly out of the HDD bay..
4. Remove four M3x4 brass flat head screws securing
the HDD to the bracket and lift the drive out of the
bracket .
5. Unplug the HDD connector from the drive.
TOSHIBA
Tough Enough for Today’s World.
49472355.079.png 49472355.080.png
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
TM
S1 Series
MODEM BOARD REMOVAL
Modem/CPU
cover
Modem
board
M2x4 black screws
M2x4 brass screws
1. Turn the computer upside down.
2. Remove two M2.5x4 black screws securing the
modem cover.
3. Remove the modem cover .
4. Remove two M2x4 silver flat head screws securing
the modem board.
5. Disconnect the modem board from PJ1006 on the
system board.
6. Disconnect the modem cable from JP1 on the
modem card.
COOLING MODULE REMOVAL
CPU REMOVAL
Cooling
module
CPU
Fan cable
Close
PJ770
Open
silver flat head screws
Silicone grease
CPU lock
1. Disconnect the fan cable from CN1007 on the system
board.
2. Remove four silver flat head screws securing
the cooling module.
3. Lift out the cooling module .
1. Insert a flat head screwdriver to the CPU lock
and rotate it counter-clockwise to unlock the CPU .
2. Lift out the CPU .
TOSHIBA
Tough Enough for Today’s World.
49472355.081.png 49472355.082.png 49472355.083.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin