MICAR01GBBT.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE MITSUBISHI MOD. CARISMA* YEAR. 01 ﬁ

PETROL

DIESEL

* Models with original equipment keyless entry system.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens on the servobrake support, in the engine

compartment.

CENTRAL UNIT POSITION

Position the modular systems and the modules under the driver’s side dashboard.

POWER SUPPLY

+ 30: connect to the WHITE wire located in the wiring harness coming out of the central doors

locking unit placed under the central consolle.

- 31: connect directly to the car body.

IGNITION WIRE

+ 15/54: connect to the BLUE wire in the wiring harness coming out of the connector of the

central doors locking unit located under the central consolle.

DIRECTION INDICATORS

Connect to the GREEN/RED and GREEN/BLACK wires located in the wiring harness coming

out of the connector of the central doors locking unit placed under the central consolle.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side:

Cut the GREEN/RED wire located in the wiring harness coming out of the original switch.

Front window, passenger’s side:

Cut the RED/YELLOW wire located in the wiring harness coming out of the driver’s side door.

Rear window, driver’s side:

Cut the YELLOW/RED wire with SILVER reference located in the wiring harness coming out of

the driver’s side door.

Rear window, passenger’s side:

Cut the WHITE/RED wire with SILVER reference located in the wiring harness coming out of

the driver’s side door.

ACTIVAT./DEACTIVATION

CONTROLS

Connections antitheft/vehicle

38XX Vehicle Position

YELLOW/BLACK BLUE/WHITE (motor) central doors locking unit

GREY/BLACK BLUE/BLACK (motor) central doors locking unit

VIOLET GREEN/RED (BLK) central doors locking unit

ORANGE ground car body

VIOLET/WHITE ground car body

ORANGE/WHITE ground car body

The connection must be done in the wiring harness coming out of the connector of the central

doors locking unit located under the central consolle.

IMMOBILISATION POINT

Central locking

Cut the BLACK/WHITE wire located in the wiring harness coming out of the connector of the

central unit, behind the driver’s side loudspeaker.

STARTER

+ 50: Cut the BLACK/YELLOW wire located in the wiring harness coming out of the connector

of the ignition key.

BONNET SWITCH

Install an additional switch on the front headlamp support plate, driver’s side.

DOORS SWITCH

Connect to the RED/GREEN wire with SILVER references located in the wiring harness under

the driver’s side sill cover.

BOOT SWITCH

Connect to the RED/GREEN wire with BLACK reference located in the wiring harness coming

out of the boot lamp.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

micar01gbbt.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: