*********************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.8.2 (Formal Release) Release Date : 7th August 2008 Applicable Models : Vigor2700 / 2700G / 2700V / 2700VG ADSL Firmware : 131701 (UK Standard) 121201/113111 (Alt) Locale : UK ONLY Refer to www.draytek.co.uk for full product specification ***************** Improvements -------------------- - LAN to WLAN connectivity is now enabled if WLAN is enabled from Telnet. - DS Actual PSD/US Actual PSD and Far Current Attenuation/Far SNR Margin are now shown correctly. - The router will reboot when more than 20 entries on Bind IP to MAC are set. - When the wireless function of AP is disabled, the wireless client can now immediately tell that it has gone offline and wired connectivity is uninterrupted. *********************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.8.1 (Formal Release) Release Date : 12th June 2008 Applicable Models : Vigor2700 / 2700G / 2700V / 2700VG ADSL Firmware : 131701 (UK Standard) 121201/113111 (Alt) Locale : UK ONLY Refer to www.draytek.co.uk for full product specification ***************** [Improvements & Corrected issues] - Improve wireless performance - Correct telnet command "internet -V" & "internet -u" displaying incorrect information issue - Correct telnet command "ip igmp_proxy set/reset" causing router crash issue - Correct reboot issue caused by nmap tool *********************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.8.0 (Formal Release) Release Date : 28th February 2008 Applicable Models : Vigor2700 / 2700G / 2700V / 2700VG ADSL Firmware : 131701 (UK Standard) 121201/113111 (Alt) Locale : UK ONLY ***************** [New Functions] - New 1.0.8 Wireless driver - wireless WMM and APSD (Power Save) functions - support the buttons of \"bridge\" and \"repeater\" MAC address in Access Point Discovery page - Add software IGMP snooping - Add wireless software IGMP snooping - New telnet command \"sys autoreboot [on/off/hour(s)]\" - Add VPN IKE/IPSec NAT-T function [Improvements & Corrected Problems] - Correct wireless channel mapping - Correct a issue regarding a DHCP renewal problem - Correct an issue with PSTN relaying - Adjust the serverity rating of tear drop attack for mail alerts *********************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.7.3.3 (Formal Release) Release Date : 21st November 2007 Firmware Build : Applicable Models : Vigor2700 / 2700G / 2700V / 2700VG ADSL Firmware : 131701 (UK Standard) 121201/113111 (Alt) Locale : UK ONLY ********************************************************************************** [New Functions] - support "vlan" telnet command [Improvements & Corrected Problems] - Correct access list logical error problem - Correct reboot issue for SIOL VOIP when WAN is in DHCP mode - Increase UPNP sessions up to 30 sessions - Improve "#0" switch to PSTN line function under no dial-tone condition for Vigor 2700V (2S1L) and 2700VG (2S1L) *********************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.7.3.2 (Formal Release) Release Date : 28th October 2007 Firmware Build : Applicable Models : Vigor2700 / 2700G / 2700V / 2700VG ADSL Firmware : 131701 (UK Standard) 121201/113111 (Alt) Locale : UK ONLY ********************************************************************************** [New Functions] - QoS : Now 8 user defined types are supported (this reduced pre-definded types by 4) [Improvements & Corrected Problems] - Correct that DHCP can't get IP when strict bind - Improve that QoS Inbound enable will drop the RX throughput - Improve VPN pass through issue when use Nortel VPN client *********************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.7.3.1 (Formal Release) Release Date : 1st October 2007 Firmware Build : Applicable Models : Vigor2700 / 2700G / 2700V / 2700VG ADSL Firmware : 131701 (UK Standard) 121201/113111 (Alt) Locale : UK ONLY Refer to www.draytek.co.uk for full product specification ********************************************************************************** [New Functions] - support zoneedit to DDNS - support "port" telnet command - support telnet commands to set adsl EC/bitswap parameters (a) adsl bitswap x y (b) adsl fdmec x [Improvements & Corrected Problems] - Improve that show ddns update message on syslog - Correct wireless region code issue for Taiwan - Correct that 2nd subnet(routed) cannot trigger ISDN Backup connection - Correct that windows vista failed to get one IP if it connected with Vigor router at WAN side [Notes] - How to use Telent command to set "User Agent" for VoIP voip sip misc -t <val> val = 0, hides SIP header User-Agent val = 1, shows SIP header User-Agent val = 2, use default User-Agent i.e. DrayTek UA-1.2.3 val = 3, use user-defined User-Agent voip sip misc -u UAValue sets User-Agent to uaValue *********************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.7.3 (Formal Release) Release Date : 20th July 2007 Firmware Build : Applicable Models : Vigor2700 / 2700G / 2700V / 2700VG ADSL Firmware : 131701 (UK Standard) 121201/113111 (Alt) Locale : UK ONLY Refer to www.draytek.co.uk for full product specification *********************************************************************************** [New Functions] - Support four SSIDs for Wireless LAN. - Support RFC-3262 for VoIP (MWI (Message Waiting Indicator) and PR-ACK) [Improvements & Corrected Problems] - Correct the issue of DDNS update twice in PPPoE mode. - Improve PPPoE dial speed. - Increase the voice volume of VoIP port. - Improve VoIP stability. - Expand the length of Username and Password from 15 to 63 characters in Mail Alert Setup. - Improve the Telnet command "voip sip misc" to support "User Agent" for VoIP. [Notes] - How to use Telent command to set "User Agent" for VoIP voip sip misc -t <val> val = 0, hides SIP header User-Agent val = 1, shows SIP header User-Agent val = 2, use default User-Agent i.e. DrayTek UA-1.2.3 val = 3, use user-defined User-Agent voip sip misc -u UAValue sets User-Agent to uaValue *********************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.7.2 (Formal Release) Release Date : 24th April 2007 Refer to www.draytek.co.uk for full product specification *********************************************************************************** [New Functions ] - Support DHCP with IP Bind MAC. - Add "Near/Far-end Actual Aggregate Transmit Power (ACTATP)" & "Attainable Net Data Rate (ATTNDR)" to Telnet command "adsl status". [Improvements & Corrected Problems] - Improve DDNS log. - Improve the Call Waiting stability. - Correct the wrong wireless MAC address on WUI. - Correct one day delay issue in NTP. - Improve the NTP update in static IP mode. - Correct the DHCP Relay issue when DHCP server is located at WAN side. - Correct the caller ID display issue. - Improve the VOIP codec stability. - Improve the setting for MPoA page. *********************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.7.1.3 (Formal Release) Release Date : 29th May 2007 Refer to www.draytek.co.uk for full product specification *********************************************************************************** [New Functions ] - Support DHCP with IP Bind MAC. - Add "Near/Far-end Actual Aggregate Transmit Power (ACTATP)" & "Attainable Net Data Rate (ATTNDR)" to Telnet command "adsl status". [Improvements & Corrected Problems] - Improve DDNS log. - Improve the Call Waiting stability. - Correct the wrong wireless MAC address on WUI. - Correct one day delay issue in NTP. - Improve the NTP update in static IP mode. - Correct the DHCP Relay issue when DHCP server is located at WAN side. - Correct the caller ID display issue. - Improve the VOIP codec stability. - Improve the setting for MPoA page. - Improve the VoIP stability when there are two or more ring ports for one SIP account. - Improve the ring detection function of PSTN loop-through. - Improve the stability of PPTP pass-through in ISDN Internet connection. *********************************************************************************** Release Notes for Vigor2700 series Firmware Version : 2.7.1.1 (Formal Release) Release Date : 9th January 2007 *********************************************************************************** - Improve the router stability when Inbound setting on QoS is chosen and wireless is disabled. - Remove '+' sign if it is in the beginning of caller ID. - Improve the VPN interoperability with VPN Tracker on Mac. - Improve the NTP Client stability. - Correct the display of Annex Type on Syste...
TirNaNog