ScreamHouse.pdf

(2326 KB) Pobierz
54243479 UNPDF
Please note that this project is not recommended for children. It requires a moderate degree of skill, and the use of a cutting blade, which is extremely
dangerous. When using cutting blades always use protective eyewear. Color printing is recommended. This model was designed to be printed on
Matte Paper Heavyweight, and the use of white glue is recommended.
There are many folds in the model, and it is recommended that you score the fold first, using a dull cutting blade, or other fine, blunt tipped instrument.
Black dashed lines represent a mountain fold (a fold which point upward), and orange dashed lines represent a valley fold (the fold points downward).
The orange dashed lines are accompanied by a red “+” at each end. These are to be used as pin guides, so you can poke small holes at the “+”, flip the
sheet over, and score between the holes for a clean valley fold. Read the instructions and study the illustrations carefully before beginning.
Before removing pieces from
sheet, cut all indicated slots.
Optional:
Remove windows
from first floor
sections 1A, 7A, 9A.
Optional:
Score, cut and fold
4 window inserts
11A
Cut T-shape on front
door 1A and fold doors
inward.
Universal elements and all related indicia © 2006 Universal Orlando. All rights reserved.
Page 1 of 14
54243479.035.png 54243479.036.png 54243479.037.png 54243479.038.png
1A, 2A, 4A shown face down and
glued along tab edges.
Glue window inserts in place.
4A
Fold and glue 3A as shown.
1A
2A
3A
Slide piece 3A tabs into the
rear 3 slots around front door.
Glue down tabs on outside.
Porch should extend beyond
the front wall.
Fold and glue the
4 pillar pieces 6B.
Fold and glue the
porch roof 6A as shown.
6A
6B
6B
6B
Insert blue tabs through the 8
slots in the porch roof 6A. Fold down and glue pillar tabs.
6B
Fold down the roof 4A.
Insert front tab into roof slot.
Glue roof to side tabs.
Fold down tabs.
Insert porch tabs into slots
of the front wall, and glue the
bottom of the pillars within
the squares on the porch.
Fold down tabs.
5A
Universal elements and all related indicia © 2006 Universal Orlando. All rights reserved.
Page 2 of 14
54243479.001.png 54243479.002.png 54243479.003.png 54243479.004.png 54243479.005.png
Fold and glue cupola piece 5B as shown.
Glue cupola piece 5B to dark
rectangular area on the roof as shown.
Glue the bottom edges of
the brackets to the walls.
Glue edge tabs
of 9A, 10A and 4C
4C
4B
Glue edge tabs
of 7A, 8A and 4B
9A
10A
8A
7A
Glue roof to side tabs
and insert front tab
through slot.
Insert floor pieces
8B and 10B
up into bottoms.
11Cx2
8B
10B
11Dx8
Fold and glue 8 chimney
stacks 11D as shown and glue
to squares on top of chimneys .
Fold and glue 2 chimney
pieces 11C as shown.
Insert chimney tabs into
roof slots.
Glue left and right sections
to the middle structure.
Attach 11E and 11F to both
sides of cupola
11F
11E
Universal elements and all related indicia © 2006 Universal Orlando. All rights reserved.
Page 3 of 14
54243479.006.png 54243479.007.png 54243479.008.png 54243479.009.png 54243479.010.png 54243479.011.png 54243479.012.png
4A
SLOT >
< SLOT
SLOT >
< SLOT
SLOT >
SLOT >
< SLOT
Page 4 of 14
54243479.013.png 54243479.014.png 54243479.015.png 54243479.016.png
11E
11F
11D x8
Page 5 of 14
54243479.017.png 54243479.018.png 54243479.019.png 54243479.020.png 54243479.021.png 54243479.022.png 54243479.023.png 54243479.024.png 54243479.025.png 54243479.026.png 54243479.027.png 54243479.028.png 54243479.029.png 54243479.030.png 54243479.031.png 54243479.032.png 54243479.033.png 54243479.034.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin