Model kartonowy - Digital Card Model 2000 - Soptwich-Wright (1-32).pdf

(4630 KB) Pobierz

119106672 UNPDF

file:///A|/ReadFirst.txt

Digital Card Models

Sopwith Wright Kit

We are very happy to present the Sopwith Wright Card Model. I've always loved these old

birds and it's my hope that we do a series of them. Some of the methods used in making

the small parts are going to be a bit different from what you are used to, and will

require some explaining.

As to parts placement, I've included a picture gallery of the test model that shows

reasonably well where the various tanks, sprokets, etc,.go. I've also included a 3-view

and each view larger on it's own page. You will notice, the tanks and radiator are on one

side in the 3-views and the other in the photos. You must remember this machine was a one

of a kind, and possibly several methods were tried. Also I had access to several drawings

and both views were dipicted in different drawings.

As to methods and order of construction. Our beta tester, Mark Johnson has agreed to let

me put his review of the model on this cd. In it he details order of construction and

methods very well. In addition to his suggestion of layering card stock for tail booms

and elevator supports, another method I've found to work is cut one side out of the card

stock, Glue to a piece of card board, the back of a legal pad, cereal box, etc,. Then cut

oround the part with a SHARP razor blade, and glue on the other side.

These small parts will need to be touched in with paint, no matter how you do it.

We avoided giving in to the urge to "thicken" some parts for ease of construction, as we

were more intrested in accuracy than making a model that's easy.

You will notice that pages 6, 7, and 8 consist of black, brown, and silver squares. No

your printer isn't going bad, these are what I call tubing stock. Things like the Chain

drives, engine cylinders, spacers for the sprokets, etc,. can be made by rolling the

parts into a paper tube. Rather than make lots of small pieces, that will drive you nuts

trying to roll, I've included pages of colored squares you can cut out and roll to the

desired diameter. Than simply slice off the desired length. Print out as many as you

need.

This project isn't for the beginner, but with a few simpler models under your belt, it

won't prove to be too hard. It isn't possible to list all the different methods one could

use, so I've tried to give you a few that might make things easier.

If you get stuck as always just e-mail us at sbucher@hydrosoft.net and we'll help you all

we can.

Enjoy the model, Digital Card Models

file:///A|/ReadFirst.txt [2/10/2001 4:19:58 PM]

119106672.029.png

119106672.030.png

119106672.031.png

119106672.032.png

119106672.001.png

119106672.002.png

119106672.003.png

119106672.004.png

119106672.005.png

119106672.006.png

119106672.007.png

119106672.008.png

119106672.009.png

119106672.010.png

119106672.011.png

119106672.012.png

119106672.013.png

119106672.014.png

119106672.015.png

119106672.016.png

119106672.017.png

119106672.018.png

119106672.019.png

119106672.020.png

119106672.021.png

119106672.022.png

119106672.023.png

119106672.024.png

119106672.025.png

119106672.026.png

119106672.027.png

119106672.028.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin