OMRON-zasilacz impulsowy typ s82k_datasheet_m048-e1-06.pdf

(295 KB) Pobierz
Switch mode Power Supply
S82K
Ultimate DIN-track-mounting Power Supply
with a Wide Power Range from 3 to 240 W
• Wide power range: 3 to 240 W
• Wide AC input voltage range: 100 to 240 V on one body.
• Undervoltage alarm function (indicator) incorporated as stan-
dard. (With the 240-W models, applicable only to the “-T” mod-
els.) 90 and 100-W models standardized with the alarm output.
• Output/input terminal parts separated on body upper/bottom
side, respectively, for safe and smart wiring.
• Multiple pairs of output terminals;
Three pairs for 90, 100, and 240-W models
Two pairs for 30 and 50-W models
• Finger-safe terminal block with cover according to VDE0106/
P100.
• Conforms to the stringent EN50081-1 standard for universal
use in any environment subject to EMI conditions (except for
240-W models) in addition to EN50082-2 conformity for use at
any EMS environment.
• DC output ports comply to EN55022 class A, thus ensuring use
in any environment subject to EMI with recommended external
filters (3- to 100-W models).
• Meets EN61000-3-2 (limits for harmonic current emissions) with
PFC on 90, 100, and 240-W models.
• Parallel running operation (100 and 240-W models).
• Class 2 approved (except for 240-W models and 7.5-W dual
output models).
• Approvals of various international safety standards for industrial
control equipment and industrial computing systems (ITE/TE),
in addition to other important approvals.
• Six-language instruction manual provided.
Model Number Structure
Model Number Legend
S82K -
1
2
3
4
1. Power Factor Correction
None: No
P:
3. Output Voltage
05: +5 VDC
12: +12 VDC
15: +15 VDC
24: +24 VDC
27:
Yes
2. Power Ratings
003: 3 W
007: 7.5 W
015: 15 W
030: 30 W
050:
12 VDC
±
28:
±
15 VDC
4. Undervoltage alarm indicator/output
<For 3- to 100-W models>
None: Yes
<For 240-W models>
50 W
090:
90 W
Switch mode Power Supply S82K
L-5
802752219.129.png 802752219.140.png 802752219.151.png 802752219.161.png 802752219.001.png 802752219.012.png 802752219.022.png 802752219.033.png 802752219.044.png 802752219.054.png
 
802752219.075.png
 
802752219.092.png
 
802752219.093.png 802752219.094.png 802752219.095.png
 
802752219.096.png
 
802752219.097.png 802752219.098.png 802752219.099.png 802752219.100.png 802752219.101.png 802752219.102.png 802752219.103.png 802752219.104.png 802752219.105.png 802752219.106.png
 
Ordering Information
List of Models
Power ratings
Output voltage
Output current
Function Configuration
Models
Output
Undervoltage
alarm indicator/
output
PFC
3 W
5 V
0.6 A
Single output
Yes
No
S82K-00305
12 V
0.25 A
S82K-00312
15 V
0.2 A
S82K-00315
24 V
0.13 A
S82K-00324
7.5 W
5 V
1.5 A
S82K-00705
12 V
0.6 A
S82K-00712
15 V
0.5 A
S82K-00715
24 V
0.3 A
S82K-00724
+V12/
−
V12
0.3 A/0.2 A
Dual output
S82K-00727
+V15/
−
V15
0.2 A/0.2 A
S82K-00728
15 W
5 V
2.5 A
Single output
S82K-01505
12 V
1.2 A
S82K-01512
24 V
0.6 A
S82K-01524
30 W
5 V
5.0 A
S82K-03005
(see note 1)
12 V
2.5 A
S82K-03012
24 V
1.3 A
S82K-03024
50 W
24 V
2.1 A
S82K-05024
90 W
24 V
3.75 A
Yes
S82K-P09024
No (see note 4)
S82K-09024
100 W
24 V
4.2 A
(see note 2)
Yes
S82K-P10024
No (see note 4)
S82K-10024
240 W
24 V
10 A
(see note 3)
No
S82K-24024T
No
Yes
S82K-P24024
No
S82K-24024
Note: 1. The output capacity of the S82K-03005 is 25 W.
2. The output current during parallel operation is 3.78 A.
3. The output current during parallel operation is 9 A.
4. Comply to EN61000-3-2 A14
Accessories (Order Separately)
Mounting Track
50 cm (l)
×
7.3 mm (t)
PFP-50N
1 m (l)
×
7.3 mm (t)
PFP-100N
1 m (l)
×
16 mm (t)
PFP-100N2
Noise Filter
for 3- to 50-W models
S82Y-JF3-N
for 90-W and 100-W models
S82Y-JF6-N
Switch mode Power Supply S82K
L-6
802752219.107.png 802752219.108.png 802752219.109.png 802752219.110.png 802752219.111.png 802752219.112.png 802752219.113.png 802752219.114.png 802752219.115.png 802752219.116.png 802752219.117.png 802752219.118.png 802752219.119.png 802752219.120.png 802752219.121.png 802752219.122.png 802752219.123.png 802752219.124.png 802752219.125.png 802752219.126.png 802752219.127.png 802752219.128.png 802752219.130.png 802752219.131.png 802752219.132.png 802752219.133.png 802752219.134.png 802752219.135.png 802752219.136.png 802752219.137.png 802752219.138.png 802752219.139.png 802752219.141.png 802752219.142.png 802752219.143.png 802752219.144.png 802752219.145.png 802752219.146.png 802752219.147.png 802752219.148.png 802752219.149.png 802752219.150.png 802752219.152.png 802752219.153.png 802752219.154.png 802752219.155.png
 
Specifications
Ratings/Characteristics
3- to 240-W models without PFC
Item
Single output
Dual
outputs
Single output
3 W
7.5 W
7.5 W
15 W
30 W
50 W
90 W
100 W
240 W
Efficiency (typical)
60% to 80% (Varies depending on specifications.)
Input
Voltage
(see note 1)
AC
100 to 240 V (85 to 264 V)
100 V (85 to 132 V)/
200 V (170 to 264 V)
Selectable
100 V (85 to
132 V)/
200 V (170 to
253 V)
Selectable
DC
90 to 350 V (see note 2)
Not possible
Frequency
50/60 Hz (47 to 450 Hz)
Current
(see note 3)
100-V
input
0.15 A
max.
0.25 A max.
0.45 A
max.
0.9 A
max.
1.3 A
max.
2.5 A max.
5.5 A max.
200-V
input
0.25 A
max.
0.6 A
max.
0.8 A
max.
1.5 A max.
3.5 A max.
Power factor
---
Leakage cur-
rent
(see note 3)
100-V
input
0.5 mA max.
200-V
input
1 mA max.
Inrush cur-
rent
(see note 3)
100-V
input
15 A max.
25 A max.
200-V
input
30 A max.
50 A max.
Noise filter
Ye s
Note: 1. Use with DC voltage input is beyond the conditions of approval or conformance to applicable safety standards.
2. Use the 7.5-W single-output models under the load of 90% max. if the voltage range is between 90 and 110 VDC.
3. Defined with a 100% load and the rated input voltage (100 or 200 VAC).
Switch mode Power Supply S82K
L-7
802752219.156.png 802752219.157.png 802752219.158.png 802752219.159.png 802752219.160.png 802752219.162.png 802752219.163.png 802752219.164.png 802752219.165.png 802752219.166.png 802752219.167.png 802752219.168.png 802752219.169.png 802752219.170.png 802752219.171.png 802752219.002.png 802752219.003.png 802752219.004.png 802752219.005.png 802752219.006.png 802752219.007.png 802752219.008.png 802752219.009.png 802752219.010.png 802752219.011.png 802752219.013.png 802752219.014.png 802752219.015.png 802752219.016.png 802752219.017.png 802752219.018.png 802752219.019.png 802752219.020.png 802752219.021.png
 
3- to 240-W models without PFC
Item
Single output
Dual
outputs
Single output
3 W
7.5 W
7.5 W
15 W
30 W
50 W
90 W
100 W
240 W
Output
(see note 2)
Voltage adjustment
range
10% (V.ADJ)
Not possi-
ble (see
note 3)
10% (V.ADJ);
10% to 15% for S82K-03012/-03024/-05024
±
±
−
Ripple (see note 1)
2% (p-p) max.
Input variation
influence
0.5% max. (at 85 to 264 VAC input, 100% load)
0.5% max. (at 85 to
132 VAC/170 to
264 VAC input, 100%
load)
0.5% max.
(at 85 to
132 VAC/
170 to
253 VAC
input,
100% load)
Load variation
influence
1.5% max.
(0 to 100% load)
+V: 1.5%
max.
−
1.5% max.
(0 to 100% load)
1.5% max.
(10 to
100% load)
V: 3%
max.
(0 to 100%
load)
Temperature variation
influence (see note 1)
0.05%/
C max.
°
Start up time
100 ms max. (up to 90% of output voltage at rated input and output) 200 ms max.
300 ms
max.
Hold time
(see note 1)
20 ms min.
Additional
function
Overload protection
105% to 160% of
rated load current,
inverted L drop,
automatic reset
(see note 4)
105% to
250% of
rated load
current, in-
verted L
drop, auto-
matic reset
105% to 160% of rated load cur-
rent, inverted L drop, automatic
reset
(30-W, 50-W models: inverted L
drop, intermittent, automatic re-
set)
101% to
111% of
rated load
current, in-
verted L
drop, auto-
matic re-
set (see
note 5)
105% to 160% of rated
load current, inverted L
drop, automatic reset
Overvoltage
protection (see note 6)
No
S82K-
24024T
model only
Undervoltage alarm
indicator (DC LOW
indicator)
Yes (color: red)
S82K-
24024T
model only
Undervoltage alarm
output (DC LOW
output)
No
Yes
S82K-
24024T
model only
Parallel operation
Impossible
Possible (2 units max.)
(see note 7)
Note: 1. Defined with a 100% load and the rated input voltage (100 or 200 VAC).
2. The output specification is defined at the power supply output terminals.
3. The settings for the output voltage must be within the following range:
+V:
1% of the rated value
±
5% of the rated value
4. When using the 7.5-W single-output models within the input voltage range between 90 and 110 VDC, the protection function will operate
at a current of 95% to 160% of the rated load current.
5. When the ambient temperature exceeds 25
V:
−
±
C, the protection function will operate at a current of 92% to 111% of the rated load current.
6. Circuit-breaker type. To reset, turn the input power supply OFF, then after 1 min has elapsed, turn the input power supply ON again.
7. Parallel operation is set with the Parallel/Single Operation Selector Switch. (This setting is not required for S82K-10024 models.)
°
Switch mode Power Supply S82K
L-8
802752219.023.png 802752219.024.png 802752219.025.png 802752219.026.png 802752219.027.png 802752219.028.png 802752219.029.png 802752219.030.png 802752219.031.png 802752219.032.png 802752219.034.png 802752219.035.png 802752219.036.png 802752219.037.png 802752219.038.png 802752219.039.png 802752219.040.png 802752219.041.png 802752219.042.png 802752219.043.png 802752219.045.png 802752219.046.png 802752219.047.png 802752219.048.png 802752219.049.png 802752219.050.png 802752219.051.png 802752219.052.png 802752219.053.png
 
3- to 240-W models without PFC
Item
Single output
Dual
outputs
Single output
3 W
7.5 W
7.5 W
15 W
30 W
50 W
90 W
100 W
240 W
Other
Ambient temperature Operating: See the derating curve in the Engineering Data section
(no condensation or icing)
Storage:
25
C to 65
C (no condensation or icing)
−
°
°
Ambient humidity
Operating: 25% to 85%
Storage:
25% to 90%
Dielectric strength
3,000 VAC at 50/60 Hz for 1 min (between all inputs and outputs)
2,000 VAC at 50/60 Hz for 1 min (between all inputs and GR terminal)
1,000 VAC at 50/60 Hz for 1 min (between all outputs and GR terminal)
Alarm current: 10 mA (3- to 7.5-W models) 20 mA (15- to 100-W models) 25 mA (240-W models)
Insulation resistance
100 M
min. at 500 VDC (between all outputs and all inputs/GR terminal)
Ω
Vibration resistance
Malfunction: 10 to 55 Hz, 0.375-mm single amplitude for 2 hrs each in X, Y, and
Z directions
Malfunction: 10 to
55 Hz, 0.15-mm
single amplitude
for 2 hrs each in X,
Y, and Z directions
Shock resistance
Malfunction: 300 m/s 2 , 3 times each in
±
X,
±
Y, and
±
Z directions
Screw tightening
torque
0.74 N • m max. (see note 2)
Output indicator
Yes (green)
Electromagnetic
interference
(see note 1)
Conforms to FCC class B
Conforms to FCC class A
EMC
(see note 3)
3 to 100-W Models
(EMI): EN50081-1
Emission Enclosure: EN55022 class B (equivalent to EN55011 class B)
Emission AC Mains: EN55022 class B (equivalent to EN55011 class B)
Emission Output Ports: EN55022 class A (with a recommended optional filter) (see note 3)
240-W Models
(EMI):
EN50081-2
Emission Enclosure:
EN55011 class A
Emission AC Mains:
EN55011 class A
Common to All Models
(EMS):
EN50082-2
Immunity ESD:
EN61000-4-2:
4-kV contact discharge (level 2)
8-kV air discharge (level 3)
Immunity Burst:
EN61000-4-4:
2-kV power-line (level 3)
2-kV output line (level 4)
Immunity Surge:
EN61000-4-5:
between 2-kV lines (except for 240-W models)
between 4-kV line and FG (except for 240-W models)
Approved standards
Class 2 (UL 1310)/Class 2 (CSA C22.2 No. 950) (see notes 4 and 5)
UL 508 (Listing)/1950
CSA C22.2 No.14/No.950, EN50178 (VDE0160), EN60950
Conforms to VDE0106/P100
UL 508 (Listing)/
1012
CSA C22.2 No.14,
CSA E.B. 1402C,
EN50178
(VDE0160),
EN60950
Conforms to
VDE0106/P100
Weight
150 g max.
260 g
max.
380 g
max.
400 g
max.
600 g max.
1,800 g max.
Note: 1. Defined with a 100% load and the rated input voltage (100 or 200 VAC).
2. Do not press down on the terminal block with a force exceeding 75 N while tightening the terminals.
3. To ensure the emission ratings, a noise filter should be used on the output lines at the closest point.
(3- to 50-W models: S82Y-JF3-N, 90- and 100-W models: S82Y-JF6-N)
4. Models other than dual output models satisfy the Class-2 requirements.
5. To meet Class-2 requirements with the 100-W model, either a fuse or circuit breaker that is UL listed or CSA certified, and rated at 4.2 A
max. should be wired in series with the load to be connected to the power supply. Only then can the power supply output be considered
as meeting Class 2.
Switch mode Power Supply S82K
L-9
802752219.055.png 802752219.056.png 802752219.057.png 802752219.058.png 802752219.059.png 802752219.060.png 802752219.061.png 802752219.062.png 802752219.063.png 802752219.064.png 802752219.065.png 802752219.066.png 802752219.067.png 802752219.068.png 802752219.069.png 802752219.070.png 802752219.071.png 802752219.072.png 802752219.073.png 802752219.074.png 802752219.076.png 802752219.077.png 802752219.078.png 802752219.079.png 802752219.080.png 802752219.081.png 802752219.082.png 802752219.083.png 802752219.084.png 802752219.085.png 802752219.086.png 802752219.087.png 802752219.088.png 802752219.089.png 802752219.090.png 802752219.091.png
 

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin