HBBoxPC620_e.pdf

Preface, Contents

Important Information

SIMATIC

Welcome to the Box PC 620

Setting-up and Operating

the Box PC 620

Box PC 620

Box PC 620 Expansions

Manual

Configuring the Box PC 620

Valid for devices with the order number

6ES7647-5...

Error Diagnosis

Hardware Information

Reinstallation of the Software

Appendix

Guidelines for ESD

Technical Specifications

Glossary, Index

Edition 03/2002

A5E00131465-01

Safety Guidelines

This manual contains notices intended to ensure personal safety, as well as to protect the products and

connected equipment against damage. These notices are highlighted by the symbols shown below and

graded according to severity by the following texts:

Danger

indicates that death, severe personal injury or substantial property damage will result if proper precautions

are not taken.

Warning

indicates that death, severe personal injury or substantial property damage can result if proper

precautions are not taken.

Caution

indicates that minor personal injury can result if proper precautions are not taken.

Caution

indicates that property damage can result if proper precautions are not taken.

Notice

draws your attention to particularly important information on the product, handling the product, or to a

particular part of the documentation.

Qualified Personnel

Repair, maintenance and servicing of device only to be carried out by qualified personnel. Qualified

persons are defined as persons who are authorized to commission, to ground and to tag circuits,

equipment, and systems in accordance with established safety practices and standards.

Correct Usage

Note the following:

Warning

This device and its components may only be used for the applications described in the catalog or the

technical description, and only in connection with devices or components from other manufacturers which

have been approved or recommended by Siemens.

This product can only function correctly and safely if it is transported, stored, set up, and installed

correctly, and operated and maintained as recommended.

Trademarks

SIMATIC  , SIMATIC HMI  and SIMATIC NET  are registered trademarks of SIEMENS AG.

Third parties using for their own purposes any other names in this document which refer to trademarks

might infringe upon the rights of the trademark owners.

The reproduction, transmission or use of this document or its

contents is not permitted without express written authority.

Offenders will be liable for damages. All rights, including rights

created by patent grant or registration of a utility model or

design, are reserved.

Organization Group Automation and Drives

Division Systems Engineering

Disclaim of Liability

We have checked the contents of this manual for agreement

with the hardware and software described. Since deviations

cannot be precluded entirely, we cannot guarantee full

agreement. However, the data in this manual are reviewed

regularly and any necessary corrections included in

subsequent editions. Suggestions for improvement are

welcomed.

 Siemens AG 2002

Technical data subject to change.

Dokumentation Titel 1Titel 2

EWA 4NEB 780 6023-01

Index-2

Siemens Aktiengesellschaft

A5E00131465

Preface

Purpose of the Manual

This manual contains all the information you need for commissioning and using the

SIMATIC Box PC 620.

It is intended both for programming and testing/debugging personnel who

commission the device itself and connect it with other units (automation systems,

further programming devices) as well as for service and maintenance personnel

who install expansions or carry out fault/error analyses.

Where is this Manual Valid?

This manual is valid for all supplied variations of the SIMATIC Box PC 620 and

describes the state of delivery as of April 2002.

Certifications, Standards and Approvals

Certifications

The device fulfils the following guidelines and certifications:

EU guideline 73/23/EEC on low voltages

EU guideline 89/336/EEC on electromagnetic compatibility

Underwriters Laboratories (UL) to Standard UL 1950 or UL 508

Canadian Standard Association (CSA) to Standard C22.2 No. 950 or No. 142

Standards and Approvals

The device fulfils the requirements for the CE approval. Approvals for UL and CSA

are available.

Further information on the approvals, certificates, and licenses for your device is

provided in Chapter 1.

Incorporation into the Communications Environment

This manual forms part of the supplied CD ÑDocumentation and DriversÒ.

For supplementary instructions on how to handle the software please refer to the

corresponding manuals (for example, Programming with STEP 7 Manual).

SIMATIC Box PC 620 Manual

A5E00131465-01

iii

Preface

Structure of the Manual

In Chapters 1 to 4 the manual contains the most important instructions for starting

up and using the Box PC 620. Chapters 5 to 9 are reference sections you will only

require in special cases.

Important Information

This chapter provides information about safety instructions, certificates, directives

and approvals.

Introduction

Before using your device for the first time you should read Chapter 2 to obtain

more information about the Box PC 620 components and their function.

Setting Up and Operation

The basic commissioning steps can be found in Chapter 3. Furthermore, you will

find instructions there on how to work with memory modules for automation

devices and further ports.

Expansion

Chapter 4 describes how to expand your Box PC 620 (for example, installation of

memory expansions). Please observe the safety instructions.

Configuration

Modifications to the system hardware may make it necessary for you to adapt the

original hardware configuration. Chapter 5 tells how to proceed in this case.

Error/Fault Dignostics

Chapter 6 will tell you how to deal with simple faults that you can diagnose and, in

some cases, eliminate yourself.

Hardware-Informationen

Chapter 7 provides information on the system resources and connecting cables.

Reinstallation of the Software

Chapter 8 shows how to proceed in case you have to reinstall software.

ESD Guidelines

The guidelines for handling electrostatic sensitive devices in Chapter A are of

particular importance for service and maintenance engineers who install

expansions or carry out error analysis with the Box PC 620.

Technical Specifications

Appendix B lists the valid technical specifications for your device. Detailed

information on how your Box PC 620 is equipped can also be found in the BIOS

message (Summary Screen) when your PC is booting up.

SIMATIC Box PC 620 Manual

A5E00131465-01

Preface

Glossary

The glossary explains important terms.

Alphabetical Index

The index will enable you to quickly find passages in the text pertaining to

important keywords.

Conventions

The abbreviation Box PC oder device is also used within this manual for the

product designation SIMATIC Box PC 620.

Further Support

If you have questions related to the use of the products which are not answered in

this manual, please consult your Siemens representative in your local agency.

http://www.ad.siemens.de/partner

Training Center

Siemens offers a number of training courses to familiarize you with the SIMATIC

S7 automation system. Please contact your regional training center or our central

training center in D 90327 Nuremberg, Germany for details:

Telephone:

+49 (911) 895-3200

http://www.sitrain.com/

SIMATIC Documentation on the Internet

You will find the documentation on the internet at:

http://www.ad.siemens.de/support

Use the Knowledge Manager to find the documentation you need quickly. If you

have any questions or suggestions concerning the documentation you can use the

ÒDocumentationÒ conference in the internet forum.

SIMATIC Box PC 620 Manual

A5E00131465-01

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: