FM356_E.PDF

(1580 KB) Pobierz
FM 356 Application Function
User Information
Product Overview
1
SIMATIC
Designing the Mechanical
Configuration
2
FM 356 Application Function
Module,
Installation and Startup
3
Installation and Startup
4
5
Manual
Reference Information
FM 356-4 Functions and
Technical Data
6
M7-300 Expansion Modules
7
Interface Modules
8
Ordering Information
9
Bibliography
A
Guidelines for Handling
Electrostatically Sensitive
Devices (ESD)
B
C79000-G7076-C356-01
153811925.002.png
Safety Guidelines
This manual contains notices which you should observe to ensure your own personal safety, as well as to
protect the product and connected equipment. These notices are highlighted in the manual by a warning
triangle and are marked as follows according to the level of danger:
!
Danger
indicates that death, severe personal injury or substantial property damage will result if proper precautions are
not taken.
!
Warning
indicates that death, severe personal injury or substantial property damage can result if proper precautions are
not taken.
!
Caution
indicates that minor personal injury or property damage can result if proper precautions are not taken.
Note
draws your attention to particularly important information on the product, handling the product, or to a particular
part of the documentation.
Qualified Personnel
The device/system may only be set up and operated in conjunction with this manual.
Only qualified personnel should be allowed to install and work on this equipment. Qualified persons are
defined as persons who are authorized to commission, to ground, and to tag circuits, equipment, and
systems in accordance with established safety practices and standards.
Correct Usage
Note the following:
!
Warning
This device and its components may only be used for the applications described in the catalog or the technical
description, and only in connection with devices or components from other manufacturers which have been
approved or recommended by Siemens.
This product can only function correctly and safely if it is transported, stored, set up, and installed correctly, and
operated and maintained as recommended.
Trademarks
SIMATIC and SINEC are registered trademarks of SIEMENS AG.
Third parties using for their own purposes any other names in this document which refer to
trademarks might infringe upon the rights of the trademark owners.
Copyright Siemens AG 1996 All rights reserved
The reproduction, transmission or use of this document or its contents is
not permitted without express written authority. Offenders will be liable for
damages. All rights, including rights created by patent grant or registration
of a utility model or design, are reserved.
We have checked the contents of this manual for agreement with the
hardware and software described. Since deviations cannot be precluded
entirely, we cannot guarantee full agreement. However, the data in this
manual are reviewed regularly and any necessary corrections included in
subsequent editions. Suggestions for improvement are welcomed.
Siemens AG
Automation Group
Industrial Automation Systems
Postfach 4848, D-90327 Nürnberg
Technical data subject to change.
Siemens AG 1996
Siemens Aktiengesellschaft
Order No. 6ES7356-0AA00-8BA0
ii
FM 356 Application Function Module, Installation and Startup
C79000 G7076 C356 01
153811925.003.png
Preface
Purpose
The information in this manual will enable you to:
Design a configuration from the M7-300 range and build it into an S7-300
programmable logic control system.
Look up operating instructions, functional descriptions and technical data
for specific modules.
Audience
The manual is intended for the following readers:
Users who plan and design the scope of a programmable logic controller.
Users who require detailed technical data.
Service and maintenance engineers who have to install and maintain
programmable logic controllers.
Scope of This
Manual
This manual applies to the following M7–300 modules:
Product
Order Number
From Release
FM 356-4 (4 Mbyte)
6ES7 356-4BM00-0AE0
A01
FM 356-4 (8 Mbyte)
6ES7 356-4BN00-0AE0
A01
It contains descriptions of all the modules that are valid at the time of issue
of this manual. We reserve the right in the case of new modules and new
releases of modules to provide product information sheets containing
up-to-date information about those modules.
Note
The structure of the S7-300 and M7-300 systems is described in manuals /1/
and /4/. Familiarity with the content and requirements of these handbooks is
a prerequisite for integrating M7-300 application function modules into a
S7-300 or M7-300 system.
FM 356 Application Function Module, Installation and Startup
C79000-G7076-C356-01
iii
153811925.004.png
Preface
Other Pertinent
Manuals
This manual describes the hardware of the application function modules from
the M7-300 range.
You will additionally need the following manuals for programming and
starting up M7-300 application function modules:
Manual
Contents
Order Number
Manual:
S7-300 programmable logic
controller
Configuring, CPU data,
module data
Planning, installation and preparing for startup
6ES7 030-0AA00-8AA0
Manual:
M7-300 programmable logic
controller
Configuring, CPU data
Planning, installation and preparing for startup
6ES7 038-0AA00-8AA0
Manual:
M7-SYS
Program design
Function library
Installation and operation
Designing, creating and testing a C program for
M7-CPU/FM modules using the M7 RMOS32
program package, and use of the M7 RMOS32
functions.
Detail description of the M7 RMOS32 functions and
data structures, listing of message types.
6ES7 881-8AA00-8AA0
User manual
Basic software for S7 and M7
STEP 7
Describes the development tools contained in
STEP 7 and the general procedure for the creation of
applications.
Contained in STEP 7
documentation package
Further Sources of
Information
You will find further sources of information in Appendix A.
How to Use This
Manual
This manual provides the information you need to install M7-300 application
function modules in an S7-300 or M7-300 controller.
Product Overview
Section 1 provides an overview of the M7-300 function modules.
Planning, Addressing
Section 2 contains the information you need to plan a system. Section 3
shows you how to address the M7-300 modules on the S7-300 backplane
bus.
Installation, Preparation for Startup
Section 4 shows you how to install the M7-300 modules and prepare them for
startup.
Replacing Modules
Section 5 describes how to change a buffer battery and replace M7-300
modules.
iv
FM 356 Application Function Module, Installation and Startup
C79000-G7076-C356-01
153811925.005.png
Preface
Functions, Technical Data
Section 6 provides a detailed description of the FM 356-4 application
function module. You will also find the technical data of the FM 356-4 in this
section.
M7-300 Expansion Modules
Section 7 contains detailed descriptions of the expansion modules for the
application function modules. You will also find the technical data for these
modules in this section.
Interface Modules
Section 8 contains detailed descriptions of the application function modules.
You will also find the technical data for these modules in this section.
Ordering Information
Section 9 contains ordering information for M7-300 components as well as
I/O modules and accessories not described in this manual.
Bibliography
Appendix A contains references to further literature that may be helpful in
certain cases.
Glossary, Index
At the end of the manual is a glossary giving definitions of technical terms
used in the manual and a comprehensive index to give you quick access to
the information you require.
Additional
Assistance
If there are questions regarding the use of products described in this manual
that are not answered here, please contact your local Siemens office. You will
find the addresses in, for example, the “Siemens World-Wide” appendix in
the “S7-300 Programmable Logic Controller, Configuring an S7-300”
manual.
In the case of questions or comments about the manual itself, please fill in
the reply form at the end of the manual and return it to the address given. We
would also ask you to give your personal evaluation of the manual in the
reply form.
We offer training courses to make the introduction to the SIMATIC S7
Programmable Logic Controller easier for you. Please contact your Regional
Training Center or the Training Center in D–90327 Nuremberg, Tel. (+49)
911 895 3154.
FM 356 Application Function Module, Installation and Startup
C79000-G7076-C356-01
v
153811925.001.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin