m2400ne.pdf

(1024 KB) Pobierz

Microsoft Word - M2Ne-Chapter02-v2.0.doc

DISASSEMBLY PROCEDURE

Chapter

2

Disassembly Procedure

Please follow the information provided in this section to perform the

complete disassembly procedure of the notebook. Be sure to use

proper tools described before.

A

SUS M2400Ne (ID1) Series Notebook consists of various modules. This

chapter describes the procedures for the complete notebook disassembly. In

addition, in between procedures, the detailed disassembly procedure of

individual modules will be provided for your service needs.

The disassembly procedure consists of the following steps:

• Battery module

• Optical drive Module

• HDD Module

• Memory Module

• CPU Module

• Keyboard Module

• Mini-PCI Module

• LCD Module

• Top Case Module

• Motherboard Module

• Modem Module

• Bottom Case Module

2 - 1

548307643.023.png

DISASSEMBLY PROCEDURE

BATTERY

Battery module

The illustration below shows how to remove the battery module.

1. Slide the battery latch and lift the battery away from the system.

OPTICAL

Optical Drive Module

DRIVE

1. Push the latch and pull the DVD-ROM module out.

REMOVAL

HDD MODULE

HDD Module

The illustrations below show how to remove the HDD module from the notebook.

Removing HDD Module

HDD MODULE

REMOVAL

(1) Remove the 2 screws (M2*5) from Hard-Disk cover.

(2) Take the cover away.

2 - 2

548307643.024.png

548307643.025.png

548307643.026.png

548307643.001.png

548307643.002.png

DISASSEMBLY PROCEDURE

(3) Remove the 2 screws (M2*5) .

(4) Pull the Hard Disk out of the system.

Please do not touch inside of the HDD module.

MEMORY

Memory Module

The illustrations below show how to remove the Memory module from the notebook.

The M2400 NE (ID1) Series Notebook comes standard with 256MB of RAM onboard.

There is one expansion SODIMM socket for you to upgrade the total memory up to

768MB with a 512 MB module

Removing Memory module

MODULE

MEMORY

(1) Remove the 3 screws (M2*5) from DIMM cover.

REMOVAL

(2) Take the cover away.

(3) Remove SO-DIMM by opening the two latches to pop up it.

(4) Pull the SO-DIMM out.

2 - 3

548307643.003.png

548307643.004.png

548307643.005.png

548307643.006.png

548307643.007.png

DISASSEMBLY PROCEDURE

CPU MODULE

CPU Module

The illustrations below show how to remove the CPU module from the notebook.

(1) Remove the 2 screws (M2*5) from FAN and gently lift the CPU fan.

REMOVAL

(2) Disconnect the CPU FAN cable and remove the 4 screws (M2*5) from

Heat-Sink.

2 - 4

548307643.008.png

548307643.009.png

548307643.010.png

548307643.011.png

548307643.012.png

548307643.013.png

548307643.014.png

548307643.015.png

DISASSEMBLY PROCEDURE

(3) Then lift the CPU heat-sink module and carefully remove the CPU

thermal pad.

(3) Turn the non-removable screw here 180 degrees counter-clockwise to

loose the CPU and squeeze the vacuum handling pump and use it to lift

the CPU away.

K/B MODULE

Keyboard Module

The illustration below shows how to remove the K/B plate.

2 - 5

548307643.016.png

548307643.017.png

548307643.018.png

548307643.019.png

548307643.020.png

548307643.021.png

548307643.022.png

Plik z chomika:

Inne pliki z tego folderu:

a3000n(1).pdf (1857 KB)
asus_a7t_series_service_manual.pdf (1870 KB)
m6000(1).pdf (1531 KB)
s62f(1).pdf (3966 KB)
s96j(1).pdf (5223 KB)

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin