VOBOR99GBDT.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

MAKE VOLKSWAGEN MOD. BORA*

YEAR 99 ﬁ

PETROL

DIESEL

* Models with original equipment keyless entry system.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens on the right of the engine compartment

or, alternatively, on the support bracket of the battery.

CENTRAL UNIT POSITION

Position the modular systems and the modules under the driver’s side dashboard

above the fuse box.

POWER SUPPLY

+ 30: connect to the clamp marked “+30” on the terminal strip located under the

driver’s side dashboard. Alternatively connect to the RED/GREEN wire coming out

of the arrows switch.

- 31: connect to a shunting of the general bulks located under the driver’s side

dashboard.

IGNITION WIRE

+ 15/54: connect to 1 mm 2 BLACK/GREEN wire located at the position nr. 2 of the

LIGHT BROWN connector, under the driver’s side dashboard.

DIRECTION INDICATORS

Connect to the 1 mm 2 WHITE/BLACK wire and to the 1 mm 2 GREEN/BLACK wire

located at the positions nr. 13 and nr. 14 of the 23 way black connector marked

T23 of the power plant of the vehicle.

ELECTRIC WINDOWS

Comfort closing

The closing of the windows is obtained with the serial radio control.

ALARM CONTROLS

Boots motor control signal

Connect to the BLUE wire at the position T23/20 for the insertion and to the

GREEN wire at the position T23/19 for the setting off, located in the connector

coming out of the central doors locking unit marked J393.

IMMOBILISATION POINT 1

Gasoil pump

Cut the BLACK/VIOLET wire at the position nr. 1 of the 6 way light brown

connector marked “T6” located on the left of the driver’s side dashboard.

IMMOBILISATION POINT 2

Starter

Cut the RED/BLACK wire at the position nr. 3 of the 6 way light brown connector

marked “T6”, under the left side of the dashboard.

BONNET SWITCH

Install an additional switch on the front headlamp support plate. As this plate is

plastic made, it is necessary to make a ground connection of the switch body.

DOORS SWITCH

Connect to the BLUE/GREY wire at the position nr. 16 of the 23 way black

connector of the central doors locking unit.

BOOT SWITCH

Connect to the BROWN/BLACK wire at the position nr. 15 of the 23 way black

connector of the central doors locking unit.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

vobor99gbdt.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: