FISCU02GBDTR1.PDF

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 01

www.cobra.it

MAKE

FIAT

MOD. SCUDO* YEAR. 02 ﬁ

PETROL

DIESEL

* Models with original equipment keyless entry system.

ALARM/SIREN

POSITION

Position the compact alarms and the sirens in the engine compartment, passenger’s side.

CENTRAL UNIT POSITION

The modular systems and the modules should be positioned under the dashboard, driver’s side.

POWER SUPPLY

+30: connect to the YELLOW wire, at the position nr. 1, in the 15 way black connector coming out of

the central locking unit located behind the glove compartment, passenger’s side.

-31: connect to the GREEN wire, at the position nr. 13 of the 15 way black connector coming out of

the central locking unit located behind the glove compartment, passenger’s side.

IGNITION WIRE

+15/54: connect to the VIOLET wire, at the position nr. 5 of the 15 way black connector coming out

of the central locking unit located behind the glove compartment, passenger’s side.

DIRECTION INDICATORS

Connect to the WHITE wire, at the position nr.10, and to the YELLOW wire, at the position nr.2, of

the 15 way black connector, coming out of the central locking unit located behind the glove

compartment, passenger’s side.

ELECTRIC WINDOWS

Positive control signal

Front window, driver’s side:

cut the WHITE wire located in the wiring harness coming out of the motor of the driver’s side door.

Front window, passenger’s side:

cut the PINK wire.

Rear window, driver’s side:

cut the BLUE wire.

Rear window, passenger’s side :

cut the GREEN wire.

These wires are in the wiring harness coming out of the driver’s side door.

Compass rear window, driver’s side:

cut the PINK wire located in the wiring harness coming out of the relative motor.

Compass rear window, passenger’s side :

cut the PINK wire located in the wiring harness coming out of the relative motor.

The above motors are located behind the plastic cover of the supports of the hatchback.

ACTIVAT./DEACTIVATION

CONTROLS

Connections antitheft/vehicle

It is suggested to refer to the diagram nr. 151.

IMMOBILISATION POINT

Gasoil pump

Cut the LIGHT BLUE wire, at the position nr. 121, under the BROWN double relay, located in the

engine compartment, behind the driver’s side headlamp.

STARTER

+ 50 : Cut the WHITE wire located in the wiring harness coming out of the black connector of the

ignition key.

BONNET SWITCH

Install an additional switch on the front headlamp support grill, driver’s side.

DOORS SWITCH

Connect to the GREY wire, at the position nr. 15, of the 15 way black connector coming out of the

central locking unit placed behind the glove compartment, passenger’s side.

BOOT SWITCH

Connect to the wire marked 8616, at the position nr. 16, of the 26 way yellow connector, coming out

of the central locking unit placed behind the glove compartment, passenger’s side.

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

fiscu02gbdtr1.doc

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 01

www.cobra.it

FITTING DIAGRAM N°151

Diagram to connect art. 3800 on

FIAT SCUDO year 2002

Original central locking unit

15 way BLACK connector

14 8 10 2

Art. 3800

GREY/BLACK

YELLOW/BLACK

VIOLET

WHITE YELLOW

ORANGE

VIOLET/WHITE

ORANGE/WHITE

Diode

1N5406

YELLOW

Original direction indicators

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed

as per the instructions given on the product installation manual.

fiscu02gbdtr1.doc

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: