Fisher 1270.pdf

(4824 KB) Pobierz
439480999 UNPDF
1270
Metal Detector
Operating Manual
F I S H E R R E S E A R C H L A B O R A T O R Y
439480999.047.png 439480999.048.png 439480999.049.png
CONTENTS
About Your Detector ................................................................pg. 3
Condensed Operating Instructions ........................................pg. 4
Setting Up ..................................................................................pg. 5
Controls & Functions.................................................................pg. 7
All Metal Mode .........................................................................pg. 9
Iron Disc Mode..........................................................................pg. 10
Normal Disc Mode....................................................................pg. 11
Search Techniques...................................................................pg. 12
Target Recovery .......................................................................pg. 14
False Signals..............................................................................pg. 15
Battery Replacement ...............................................................pg. 15
Maintenance ............................................................................pg. 16
Code of Ethics...........................................................................pg. 16
Speciications ...........................................................................pg. 17
439480999.050.png 439480999.001.png 439480999.002.png 439480999.003.png 439480999.004.png 439480999.005.png
ABOUT YOUR FISHER 1270
The 1270 is a “motion” detector and was designed to offer you
more versatility in a wide range of conditions: Highly mineralized
soil, extremely trashy areas, and deep targets. By utilizing the
various controls on the 1270, you will ind more items that were
unreachable until today. Building upon the tradition oof quality
and performance in all of Fishers detectors, the 1270 stands as the
pinnacle in a line of outstanding detectors.
FEATURES:
• 3 Search Modes -
normal discrimination, enhanced iron
discrimination, and all metal ground balanced
search.
• Patented Double Derivative, Crystal Locked Circuitry
(U.S. Patent # 4,514,692)
• Enhanced Relic Sensitivity
• Enhanced “see through” in iron trash.
• “Cutting Edge” performance in most soils
• Sensitivity Control to enable silent search or
• Audio threshold
• Silencer for silent (3rd Derivative) discrimination
• Trigger Switch mode change
• Trigger Switch Zero-Motion Pinpointing
• Near Perfect Balance for comfortable use
• Lightweight Cushioned Arm Rest & Grip
• Low Battery Alert - LED blinks automatically
• Drop-in Batteries
• Double Locking middle and lower stem
• 3 piece handle for compact storage
• Limited Lifetime Warranty*
*may vary outside of the United States. See your dealer for details.
1
3
439480999.006.png 439480999.007.png 439480999.008.png 439480999.009.png 439480999.010.png 439480999.011.png 439480999.012.png
 
439480999.013.png 439480999.014.png 439480999.015.png 439480999.016.png 439480999.017.png 439480999.018.png 439480999.019.png 439480999.020.png 439480999.021.png 439480999.022.png 439480999.023.png 439480999.024.png 439480999.025.png 439480999.026.png 439480999.027.png 439480999.028.png 439480999.029.png 439480999.030.png
CONDENSED OPERATING INSTRUCTIONS
We recommend that you irst read this entire operating manual
before taking your new 1270 out for a test. You’ll be more
knowledgeable, and have a better chance of inding more
treasure. But, we also understand the excitement of the “hunt”,
so here are some simple instructions for setting up the 1270.
Set the controls as follows:
NORMAL DISC = 5 (iron, lead, small brass & foil discrimination)
SILENCER switch = ON
IRON DISC switch = OFF
ALL METAL GROUND ADJ. = 0, OFF
(completely counter clockwise)
SENSITIVITY = 8
Turn the 1270 ON with the ON /OFF Volume control.
(adjust volume to a comfortable level)
Take your 1270 outside. There’s normally too much metal inside to per-
form a proper test. Hold the 1270 as shown in Figure 1, and slowly sweep
the search coil left and right while moving forward slightly with each
sweep. A slight motion is required for the 1270 to detect a target.
It is often helpful to bury a few known targets in the soil to get a “feel”
for how the 1270 responds to different targets at various sweep rates. Re-
member, at a DISC setting of 5, certain targets such as iron or aluminum
should be ignored.
When the 1270 “beeps”, you’ve passed over a metal target with the
search coil. Swing the 1270 left and right, then forward and back, making
an “X” over the “beep” area. Another method is to “bounce” the coil,
raising only about an inch off the ground, as you move the coil across the
target. The loudest audio response will occur in the center of the search
coil.The target will be directly below the center of the search coil. There are
exceptions to the center of coil pinpoint. For example, when a target is at
an angle or irregularly shaped. Because the 1270 is a “motion” detector,
with practice, this may be the only mode of pinpointing you will need.
To use the no-motion pinpoint mode, place the coil on the ground
away from the target, pull and hold the MODE TOGGLE SWITCH (on the
bottom of the housing). This switches the 1270 into ALL METAL no motion
PINPOINT mode. Keeping the search coil level with the ground, and mov-
ing the coil near the target you will hear an audio increase. Next, move
the 1270 in an “X” pattern over the target and stop where the loudest
tone is heard. This will be the center of your target, directly under the
center of the search coil.
Read this instruction manual thoroughly, practice often and you
are in for some exciting treasure hunting. Drop us a line if you
have any questions, comments or good inds to tell us about. In
the meantime... HAPPY HUNTING!
4
439480999.031.png 439480999.032.png 439480999.033.png 439480999.034.png 439480999.035.png 439480999.036.png
Figure #1
SETTING UP
Your new 1270 comes ready to assemble, set and use, but irst
review the steps below before proceeding.
STEP 1.
Unpack your 1270 carefully, and save the carton. Review the various
part names noted in igure #2.
STEP 2.
The coil is attached to the lower stem. Depress the spring lock button
on the lower stem, and slip it into the center handle section until it snaps
into a hole.
STEP 3.
Depress the spring lock button on the upper handle and insert it into the op-
posite end of the center handle section and hand tighten the lock nut.
STEP 4.
The search coil angle and stem length may now be adjusted. The stem
length can be adjusted by loosening the lower lock nut and allowing the
spring lock to snap into the desired hole in the middle handle section.
5
439480999.037.png 439480999.038.png 439480999.039.png 439480999.040.png 439480999.041.png 439480999.042.png 439480999.043.png 439480999.044.png 439480999.045.png 439480999.046.png

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin