Psionic_Gadgets.pdf

THE PSIONIC MAGICIANS GADGET

PATTERN BOOK

Charles W. Cosimano

TABLE OF CONTENTS

I Introduction

II What you need

III Connections

IV Pendulum

V Ideometer

VI Pendulum Chart

VII Headband

VIII Main Board

IX Chakra Wheel

X Color Wheel

XI Basic Radionics

XII Amplifying Patterns

XIII Circle Patterns

XIV Light Cylinder

XV I Ching Board

XVI Visualization Board

XVII Pyramid Crystal Amplifier

XVIII Pyramid Crystal Amplifier Board

XIX Pyramid Gun

XX Third Eye Headband

XXI Glossary

INTRODUCTION

I began my first book on psionics, almost twenty four years ago now, by stating that the

purpose of that book was to end a monopoly. It is my sincere hope that this little book will

continue to blow that monopoly right out of the water.

There seemed at the time I started writing to be a couple of reasons why people interested

in matters psychic were not more actively involved in psionics. The first was that most of

the material available on it (damned little in this country) was extremely complicated and

almost exclusively oriented towards healing. Not that there is anything wrong with healing

people, but there are other uses as well. The second was the extreme rarity and expense

of psionic instruments. It is still not uncommon for a pre-made unit to cost nearly a

thousand dollars. Thus, while it may be going too far to say that a conspiracy was

involved, but the effect was that psionics, and in particular, radionics was an art well

hidden from public view. Psionics 101 was intended to correct that, and was successful in

its own way, but I learned that some of my readers, much as they were interested,

entertained and some even terrified by that work, (which amazes me considering how

harmless in comparison to my later writings it was) were still intimidated by the

construction of the devices. This book was, and is, intended to solve that problem. It is

impossible to get simpler than cut-outs. And in creating this work I hope that I have solved

another problem as well.

Back in the mid to late 70's, a pair of books were published written, or rather designed, by

John P. Boyle. They consisted of a collection of patterns and designs for psionic devices,

such as pyramids of various types, which were in vogue at the time. Unfortunately, my

particular area of interest, radionics, was left out and the idea of stiff paper, with no

backing, while useful for putting together items not intended to last, proved to be, at least

in my case, clearly unsatisfactory. It made storage difficult, to say the least.

I have tried to correct that problem with this book, by creating patterns that can be printed

out to be used as patterns for cutting heavier material, such as cardboard or posterboard.

This will allow you, the reader and experimenter, to create machines which will serve you

for some years, rather than be crushed in unrecognizable lumps in the back of a closet.

As it has never been my practice to indulge in unreasonable flights of fancy, all of the

devices in this book have been tested and used by the author. I trust that you will find

them to be entertaining as well as useful. In fact, it is not stretching the point to say that

when you have finished with this work you will have a complete psionics laboratory, far

better equipped than the one I started with.

When using this book, it is a good idea to read all the instructions before starting to make

any of the devices. I have tried to put all the instructions in the right order, but every once

in a while, something slips up, for stylistic or other reasons, (like the author having a rare

fit of stupidity or an AARP moment) and thus by reading first, you may save yourself some

trouble.

One other thing. Psionics is more of an art than a science and some designs work better

for some people than others. The advantage of this format is that is a simple matter to

rearrange things and it is my hope that you will not hesitate to do so when you feel that

you might attain better results.

YOU WILL NEED

In spite of my best efforts, there will still be a few things that you will need to acquire

besides the patterns in this book and some cardboard. Some should be obvious, such as

glue, but others include:

A plastic can lid, such as off of a coffee can, to be used as the stick pad.

Magnet strip, which is usually found in the kitchen area of hardware stores or in craft

shops.

Unshielded copper wire, sometimes sold as magnet wire.

Insulated copper wire, gauge unimportant but the easier to work with the better.

Alligator clips.

Aluminum foil.

Paper fasteners. (the type with prongs that spread out, sometimes referred to as brads)

The usual tools, such as scissors, punch, pencil.

Fortunately you will not be put into the position of a group of psionic magicians standing in

their robes and pointed hats, bent over a book of 1930's radionic instrument designs being

instructed to purchase, without haggling, a Sylvania MK1147 amplifier tube while a group

of anthropomorphic brooms stand in the doorway with water buckets.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika: